DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

․ P-LCC-2 package. ․ White package. ․ Optical indicator. ․ Colorless clear window. ․ Wide viewing angle. ․ Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․ Computable with automatic placement equipment. ․ Available on tape and reel (8mm Tape). ․ Pb-free ․ The product itself will remain within RoHS compliant version Descriptions ․ The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.

Applications

․ Automotive: backlighting in dashboard and switch. ․ Telecommunication: indicator and backlighting in telephone and fax. ․ Flat backlight for LCD, switch and symbol. ․ Light pipe application. ․ General use. Device Selection Guide Chip Emitted Color Resin Color Material InGaN Brilliant Green Water Clear

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V 5 R V Forward Current I 30 F mA Peak Forward Current (Duty 1/10 @1KHz) I 100 FP mA Power Dissipation Pd 110 mW Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Notes: 1.Tolerance of Luminous Intensity : ±1 1% 2.Tolerance of Dominant Wavelength : ±1nm 3.Tolerance of Forward Voltage : ±0.1V Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 900 ----- 1800 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λ ----- P 518 ----- nm IF=20mA Dominant Wavelength λ 520 d ----- 535 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 35 ----- nm IF=20mA Forward Voltage V 2.70 F ----- 3.70 V IF=20mA Reverse Current I ----- R ----- 50 μA VR=5V

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition V2 900 1120 mcd IF=20mA W1 1120 1420 W2 1420 1800 Bin Range of Dominant Wavelength Group Bin Code Min. Max. Unit Condition Y X 520 525 nm IF=20mA Y 525 530 Z 530 535 Bin Range of Forward Voltage Group Bin Code Min. Max. Unit Condition N 10 2.70 2.90 V IF=20mA 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 14 3.50 3.70 Notes: 1.Tolerance of Luminous Intensity : ±11% 2.Tolerance of Dominant Wavelength : ±1nm 3.Tolerance of Forward Voltage : ±0.1V

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Typical Electro-Optical Characteristics Forward Current Derating Curve Relative luminous intensity % )( 100 400 450 500 550 600 Relative luminous intensity -60 -20-40 0 20 6040 10080 100 % )( 1000 Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity010 1 110 210 Forward Current Relative Luminous Intensity vs Duty=1/10 100 f=1KHz )1000(% Ta=25° Radiation Diagram 4020 60 10085 2.8 Spectrum Distribution Forward Voltage Ta=25°C Forward Current vs. Wavelength λ (nm) Forward Current I (mA) Forward Current I (mA)F Forward Current I (mA)F Ambient Temperature Ta (°C) Ambient Temperature Ta (°C)

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm RoHS Pb CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX CAT : XXX HUE : XXX REF : XXX EVERLIGHT MADE IN TAIWAN

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF 1000 Hrs. = 20 mA 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60%

RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

120 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

Device No. : DSE-0000955 Prepared date:22-Apr-2008 Prepared by: Rita Shen 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is ofte n started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com