GA6KV WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output

2 Watt DC/DC Converter

FEATURES

  • Low Cost
  • 6000VDC Isolation
  • Regulated Outputs
  • Low Leakage Current
  • MTBF > 600,000 Hours
  • Input: 5, 12, and 24VDC
  • Short Circuit Protection
  • Low Isolation Capacitance
  • Complies with EN55022 Class A
  • Output: 5, 12, 15, ±5, ±12, and ±15VDC SPECIFICATIONS: GA6KV Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT (Vin) Input Voltage Range (5V input models) 4.5 5 5.5 VDC Input Voltage Range (12V input models) 10.8 12 13.2 VDC Input Voltage Range (24V input models) 21.6 24 26.4 VDC Reverse Polarity Input Current 0.5 A Input Surge Voltage (1000ms) (5V input models) -0.7 7.5 VDC Input Surge Voltage (1000ms) (12V input models) -0.7 15 VDC Input Surge Voltage (1000ms) (24V input models) -0.7 30 VDC Leakage Current 240VAC, 60Hz 2 µA Reflected Ripple Current See Table Short Circuit Input Power All models 2000 mW Input Filter All models Pi Filter OUTPUT (Vo) Output Voltage Range See Table Output Voltage Accuracy ±2.0 ±4.0 % Output Voltage Balance Dual Output, Balanced Loads ±2.0 ±4.0 % Load Regulation Io = 10% to 100% ±0.5 ±1.0 % Line Regulation Vin = Min to Max ±0.3 ±0.5 % Output Power 2 W Output Current Range See Table Ripple & Noise (20MHz) 30 50 mVpk-pk Ripple & Noise (20MHz) Over Line, Load, and Temperature 100 mVpk-pk Ripple & Noise (20MHz) 5 mVrms Transient Recovery Time 50% Load Step 50 µs Transient Response Deviation 50% Load Step ±6 % Temperature Coefficient ±0.01 ±0.02 %/°C PROTECTION Over Load 120 % Short Circuit Protection Continuous Input Fuse Recommendation (5V input models) 1000mA Slow-Blow Type Input Fuse Recommendation (12V input models) 500mA Slow-Blow Type Input Fuse Recommendation (24V input models) 250mA Slow-Blow Type GENERAL Efficiency See Table Switching Frequency 25 80 KHz Isolation Voltage Rated 60 seconds 6000 VDC Isolation Voltage Test Flash Tested for 1 second 8000 VDC Isolation Resistance 500VDC 10 GΩ Isolation Capacitance 100KHz, 1V 20 30 pF Internal Power Dissipation 2,000 mW

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output SPECIFICATION TEST CONDITIONS Min Nom Max Unit ENVIRONMENTAL Operating Temperature (Ambient) -25 +60 °C Operating Temperature (Case) -25 +90 °C Storage Temperature -40 +125 °C Humidity 95 % Lead Temperature 1.5mm from case for 10 seconds 260 °C Cooling Free air convection MTBF MIL-HDBK-217F @ 25°C, Ground Benign 600,000 hours PHYSICAL Weight 12.4 grams Dimensions 31.8(L) x 20.3(W) x 10.2(H) mm Case Material Non-conductive black plastic SAFETY Conducted EMI EN55022 Class A OUTPUT VOLTAGE / CURRENT RATING CHART Output Current Input Current Model Number Input Voltage Output Voltage Min Max No Load Max Load Reflected Ripple Current Efficiency (Typ) Max Capacitive Load GA505R6KV 5 VDC 400mA 645mA 62% 680µF GA512R6KV 12 VDC 165mA 629mA 63% 680µF GA515R6KV 15 VDC 133mA 623mA 64% 680µF GA505RD6KV ±5 VDC ±100mA 476mA 42% 270µF GA512RD6KV ±12 VDC ±83mA 699mA 57% 270µF GA515RD6KV

5 VDC

(4.5 ~ 5.5 VDC) ±15 VDC 0mA ±66mA 100mA 695mA 15mA (Typ.) 57% 270µF GA1205R6KV 5 VDC 400mA 269mA 62% 680µF GA1212R6KV 12 VDC 165mA 262mA 63% 680µF GA1215R6KV 15 VDC 133mA 260mA 64% 680µF GA1205RD6KV ±5 VDC ±100mA 185mA 45% 270µF GA1212RD6KV ±12 VDC ±83mA 281mA 59% 270µF GA1215RD6KV

12 VDC

(10.8 ~ 13.2 VDC) ±15 VDC 0mA ±66mA 50mA 280mA 8mA (Typ.) 59% 270µF GA2405R6KV 5 VDC 400mA 134mA 62% 680µF GA2412R6KV 12 VDC 165mA 131mA 63% 680µF GA2415R6KV 15 VDC 133mA 130mA 64% 680µF GA2405RD6KV ±5 VDC ±100mA 93mA 45% 270µF GA2412RD6KV ±12 VDC ±83mA 143mA 58% 270µF GA2415RD6KV

24 VDC

(21.6 ~ 26.4 VDC) ±15 VDC 0mA ±66mA 30mA 142mA 3mA (Typ.) 58% 270µF NOTES 1. Specifications typical at +25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. Ripple and noise measured at 20MHz bandwidth. 3. Transient Recovery Time is measured to within 1% error band for a step change in output load of 50% to 100%. 4. All DC/DC converters should be externa lly fused at the front end for protection. 5. Other input and output voltages may be available, please contact factory. 6. Specifications subjec t to change without notice.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output Pin Single Output Dual Output 1 +Vin +Vin 2 +Vin +Vin

10 No Pin Common

11 No Pin Common

15 No Pin +Vout

Tolerance: Millimeters Inches X.X±0.25 X.XX±0.01 X.XX±0.13 X.XXX±0.005 Pin: ±0.05 ±0.002

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output Efficiency vs Input Voltage ( Single Output ) Efficiency vs Input Voltage ( Dual Output ) Efficiency vs Output Load ( Single Output ) Efficiency vs Output Load ( Dual Output ) Derating Curve

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with an inductor Lin (4.7uH) and Cin (220uF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin offsets possible battery impedance. Current ripple is measured at the input terminals of the module. Measurement bandwidth is 0-500 KHz. Peak-to-Peak Output Noise Measurement Test Use a Cout 0.33uF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20MHz. Position the load between 50mm and 75mm from the DC/DC Converter.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output A good quality low ESR capacitor placed as close as possible across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 1.5uF capacitors at the output. Input Source Impedance In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 4.7uF for the 5V input devices and a 2.2uF for the 12V and 24V input devices.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 GA6KV Series With 6KVDC Isolation Single and Dual Output COMPANY INFORMATION: Wall Industries, Inc. has created custom and modified units for over 40 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on time and on budget. Our ISO9001-2000 certification is just one example of our commitment to producing a high quality, well documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)587-9255 Fax: (603)778-9797 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833