GA240.030A005 IVO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Encoder singleturn / SSI – Optical sensing – Resolution: 14 bit – Clamping flange or synchro flange – Permanent check of code continuity – Extreme resistance to shock and vibration – Encoder with electronic reset – Technical data - electrical ratings Voltage supply 10...30 VDC Reverse polarity protection Yes Consumption w/o load ≤50 mA (24 VDC) Initializing time (typ.) 20 ms after power on Interface SSI Steps per turn 16384 / 14 bit Absolute accuracy ±0.025° Sensing method Optical Code Gray or binary Code sequence CW/CCW coded by connection Inputs SSI clock Control signals UP/DOWN and zero Output circuit SSI data linedriver RS485 Diagnostic outputs push-pull Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-4 Diagnostic functions Self-diagnosis Code continuity check Approval UL approval / E63076 GA240, GA241 - SSI Technical data - mechanical design Housing ø58 mm Protection DIN EN 60529 IP 54 without shaft seal IP 65 with shaft seal Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Rotor moment of inertia 14.5 gcm² Admitted shaft load ≤20 N axial ≤40 N radial Materials Housing: aluminium Flange: aluminium Operating temperature -25...+85 °C -40...+85 °C (optional) Relative humidity 95 % non-condensing Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Weight approx. 250 g E-connection Connector or cable GA240 - SSI Shaft ø10 mm Flange Clamping flange Starting torque ≤0.015 Nm IP 54 ≤0.03 Nm IP 65 GA241 - SSI Shaft ø6 mm Flange Synchro flange Starting torque ≤0.01 Nm IP 54 ≤0.015 Nm IP 65 Shaft with clamping or synchro flange Optical singleturn encoder 14 bit

www.baumerivo.com www.baumerivo.com Absolute encoders - SSI www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.29/10/2008 GA240, GA241 - SSI Part number GA240. 05 E-connection A0 Connector M23, 12-pin, axial A1 Connector M23, 12-pin, radial

11 Cable 1 m, axial

21 Cable 1 m, radial

30 10...30 VDC / gray code 13 bit 32 10...30 VDC / binary code 13 bit 90 10...30 VDC / gray code 14 bit 92 10...30 VDC / binary code 14 bit Flange / Shaft

0 Clamping flange / ø10 mm IP 54

A Clamping flange / ø10 mm IP 65 GA241. 05 E-connection A0 Connector M23, 12-pin, axial A1 Connector M23, 12-pin, radial 30 10...30 VDC / gray code 13 bit 32 10...30 VDC / binary code 13 bit 90 10...30 VDC / gray code 14 bit 92 10...30 VDC / binary code 14 bit Flange / Shaft

1 Synchro flange / ø6 mm IP 54

B Synchro flange / ø6 mm IP 65 Shaft with clamping or synchro flange Optical singleturn encoder 14 bit Accessories Connectors and cables (page %S) Z 130.001 Female connector M23, 12-pin, less cable Z 130.003 Female connector M23, 12-pin, 2 m cable Z 130.005 Female connector M23, 12-pin, 5 m cable Z 130.007 Female connector M23, 12-pin, 10 m cable Mounting accessories for GA240 - SSI (page %S) Z 119.006 Eccentric fixing, single Z 119.013 Adaptor plate for clamping flange for modification into synchro flange Z 119.017 Mounting angle for clamping flange Z 119.025 Adaptor plate for clamping flange, mounting by eccentric fixings (order separately) Mounting accessories for GA241 - SSI (page %S) Z 119.006 Eccentric fixing, single Z 119.015 Mounting adaptor for synchro flange Z 119.035 Bearing flange for encoders with synchro flange tv bit n bit n-1 tm bit 3 bit 2 bit 1 T=1/f clock data tp Clock frequency f 62.5...1500 kHz Scan ratio of T 40...60 % Time lag tv 150 ns Monoflop time tm 25 µs + T/2 Clock interval tp 30 µs Data transfer Clamping flange Synchro flange

www.baumerivo.com Absolute encoders - SSI Connector Core colour Assignment Pin 1 brown UB Pin 2 black GND Pin 3 blue Clock+ Pin 4 beige Data+ Pin 5 green Zero setting Pin 6 yellow Data- Pin 7 violet Clock- Pin 8 brown/yellow DATAVALID Pin 9 pink UP/DOWN Pin 10 black/yellow – Pin 11 – – Pin 12 – – 8 9 1012 Please use cores twisted in pairs (for example clock+ / clock-) for extensi- on cables of more than 10 m length. UB Encoder voltage supply. GND Encoder ground connection relating to UB. Data+ Positive, serial data output of differential linedriver. Data- Negative, serial data output of differential linedriver. Clock+ Positive SSI clock input. Clock+ together with clock- forms a current loop. A current of approx. 7 mA towards clock+ input means logic 1 in positive logic. Clock- Negative SSI clock input. Clock- together with clock+ forms a current loop. A current of approx. 7 mA towards clock- input means logic 0 in positive logic. Zero setting Input for setting a zero point anywhere within the programmed encoder resolution. The zero setting operation is triggered by a High impulse and has to be in line with the selected direction of rotation (UP/DOWN Connect to GND after setting operation for maximum interference immunity. Impulse duration >100 ms. DATAVALID Diagnostic output. An error warning is given at level Low. Important: Interferences must be drained by the downstram electronics. UP/DOWN UP/DOWN counting direction input. This input is standard on High. UP/DOWN means ascending output data with clock- wise shaft rotation when looking at flange. UP/DOWN-Low means ascending values with counterclockwise shaft rotation when looking at flange. Terminal significance Terminal assignment GA240, GA241 - SSI Shaft with clamping or synchro flange Optical singleturn encoder 14 bit SSI Circuit SSI-Clock Optocoupler SSI-Data Linedriver RS485 Control inputs Input circuit Input level High >0.7 UB Input level Low <0.3 UB Input resistance 10 kΩ Diagnostic outputs Output circuit NPN-OC 10 kΩ against UB Output level Low <0.5 V (I = 20 mA) Load Low <20 mA Trigger level

www.baumerivo.com www.baumerivo.com Absolute encoders - SSI www.baumerivo.com 4 Subject to modification in technic and design. Errors and omissions excepted.29/10/2008 Dimensions GA241 SSI synchro flange GA240, GA241 SSI connector dimensions M4x7 (3x120°) 42±0.1 3 9 104 ø52 5.5 ø6f8 ø50h7 ø58 59 9 ø10h6 ø36f8 ø53 ø58 20104611.5 ø10h6 ø36f8 ø53 ø58 201046 ø10h6 ø36f8 ø53 ø58 201046 M3x7 (3x120°) 48 ±0.1 17 3 ø10h6 ø36f8 ø53 ø58 201046 M3x7 (3x120°) 48 ±0.1 17 3 GA240 SSI clamping flange GA240, GA241 - SSI Shaft with clamping or synchro flange Optical singleturn encoder 14 bit Dimensions