G35-PB30-JJF

Magnetrol International...

Liquid Level Switches ASME B31.1, ASME B31.3 and NACE Construction

Manufacturer: Magnetrol International...

Document: 24 Pages / 492Kb

Request Quote Download Datasheet Read online HTML view

More from Magnetrol International... Browse G parts

Online Datasheet

Read G35-PB30-JJF online.

B35-PS56-KOH MAGNETROL | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 24

Technical content

NACE MR0175/M R0103construction availablefor flanged cage models
14-inch (356mm )side/side processconnections availableas standard
C hoice ofsealed orflanged floatcham ber design
Service pressuresup to1680psig(115.8bar)for ASME B31.1and 2240 psig (154.4 bar)for ASM E B31.3 & NACE
Process temperatures up to+1000°F (+538°C)
Specificgravity ratings as low as 0.33
C hoice ofTYPE 4X/7/9,Group B,C & D or E Ex d IIC T6 housings
Agency approvalsinclude FM ,CSA, ATEX and SAA
ASME B31.1,B31.3or NAC E C ertificate of C onformance supplied
ASME B31.1mod elwithC r-Mo cham ber
C hoice ofavailableswitchstyles,includingdry contact,hermeticallysealed,pneumaticbleedand non-bleed
C hoice ofsingleormultiple switches for singleor staged applications
1",1 1⁄2" or2" tank connections available in either NPT,socketweld,flangedside/side orflanged side/bottom configuration
Specialmaterialsofconstruction availableupon request
Availablew ith specialcoatings includingEpo xy, C arbo Zinc ® 11Primerand C arboline Top Co at, Dimetcote ® and Amercoat ®
Opt ionalhighor low temperatureinsulation available D E S C R I P T I O N Series3 float-actuated levelswitches meet ASME B31.1 or ASME B31.3requirements.The y are designed to provide critical alarm set points in clean liquid applications. B3F Flanged Cage LevelSwitch B35 SealedCage LevelSwitch A P P L I C A T I O N S ASME B31.1construction for use on boilers and in pow erplants.
Feedwaterheaters • Steam drums
C ondensate drippots • Flash tanks
De aerators • Hotw ells ASM E B31.3con struction for use in refineries and petrochemicalplants.
Gas/oilseparators • Receivers
K nockoutdrums • Flarepots
C rude/saltw aterseparators • Accumulators Series 3 Liquid LevelSwitches ASME B 31.1,ASME B31.3 and NACE Co nstruction

T A N K C O N N E C T I O N S A N D I N S T A L L A T I O N D I M E N S I O N S In addition to the standard slip-on or w eld neck R .F. flanges,many other process,vent and drainconnec - tions areavailable,including:

Socketw eld • DIN
RTJ • JIS Specialflangegasketsurfacefinishes arealsoavailable, and cages m ay be man ufactured to allow special processconnections. M A T E R I A L S O F C O N S T R U C T I O N C hambe rs and internalcomp onents on some mo dels availableinother metalalloys.
304SS • 316SS
Hastelloy ® C • M onel
Carpenter20 ® • Du plex Stainless Steel W E L D I N G Stress relieving of chamb er welds is available for flanged cage models and themod elB35-7. A C T U A T I N G L E V E L S
Specialswitchsetpointsand/or differentials
Tandem floats —where the switchactuatinglevelsare 8 inches (203mm) ormo reapart.
M ultipleswitches O P T I O N S Ma ny optionsare availableforSeries3 levelswitches.Should you require an option not listed, consultthefactoryforfurtherinformation. E N C L O S I N G T U B E Integrally w elded (socket type w eld) enclosing tube design availablefor flanged cage m odels. I N T E R F A C E C A L I B R A T I O N Un itswith interface calibration are custom designed for each application.Specificgravity differencesas sm allas 0.10 ma y be add ressed.Cons ultthe factory for all interface calibrations. E X A M I N A T I O N S / T E S T S Mag netrolisequipped to provide a fullrangeofspecial qualitycontroltesting,including:
Dye penetration • R adiography
C harpy • M agnetic particle
E xtended hydrostatic • Ultrasonic
Hardness testing C H R O M E - M O L Y C O N S T R U C T I O N The mode l B35 isavailable with a P22/F22chrome - m oly cham ber and 321 SS float for high pressure applications athigh tem peratures.

Pressure vessels are designed w ithincode specified stress limits.Design calculations,design printsand w eldqualifications are availableforaudit.Allchamb er branch and circum ferentialw eldjoints aredesigned to achieveFULL penetration. W E L D I N G Allw elding isperform ed by qualified w eldersand per procedures required by the ASM E BoilerPressure VesselC ode Sec.IX.W elds are visuallyinspected for FULL penetration; and 5% radiographicinspection of w eldisperform ed perASME B31.3. M A T E R I A L S O F C O N S T R U C T I O N Allpressure-retaining materialsare procuredw ith C ertificates ofC onformance to assure comp liance of com ponents w ith required standards. H Y D R O S T A T I C T E S T Allcham bers are hydrostaticallytested at1.5tim es the design pressure. M A T E R I A L S O F C O N S T R U C T I O N Only NACE listedmaterialsareused forpressure retain - ingparts.CertificatesofConformanc e assurecompliance ofcompone ntstorequired materialstandards . H Y D R O S T A T I C T E S T Allcham bers are hydrostaticallytested at1.5tim es the design pressure. P R O D U C T D E S I G N Pressurevessels aredesignedw ithin code specified stress limits.Design calculations,designprintsand weld qualificationsare available for audit.Allchamber branch and circumferentialweld jointsaredesigned to achieveFULL penetration. W E L D I N G Allwelding isperformed by qualified weldersand per proceduresrequired by theASM E BoilerPressure VesselCode Sec.IX.Weld s arevisuallyinspectedfor FUL L penetration.Allother nondestructiveexamination isperformed per ASM E B31.1. M A T E R I A L S O F C O N S T R U C T I O N Allpressure-retaining m aterialsare procuredw ith Certificates ofConfo rmance toassurecomp lianceof compo nents w ith required standards.Chrom e-Moly m odelsarepost-weld heat-treated. H Y D R O S T A T I C T E S T Allcham bersarehydrostatically tested at1.5times the design pressure. W E L D I N G Allwelding isperformed by qualified weldersand per proceduresrequired by theASM E BoilerPressure VesselCode Sec.IX.C arbon steelpressureboundary partsarepostw eldstressrelieved.Allw elds and heat affected zones arehardnesstested toensurecompli - ance withNACE maximum hardnessrequirements. S T A N D A R D A S M E B 3 1 . 3 C O N S T R U C T I O N S T A N D A R D A S M E B 3 1 . 1 C O N S T R U C T I O N S T A N D A R D N A C E C O N S T R U C T I O N

AGENCY MODEL APPROVED APPROVAL CLASSES FM Allwithan electricswitchmechan ism and a housing ClassI,Div 1,Groups C &D listedas TY P E 4X/7/9 ClassII ,Div 1,Groups E,F &G Allw ithan electricswitchm echanism and a housing ClassI,Div 1,Groups B,C &D listedas TY P E 4X/7/9 ClassI,Div 1,Group B ClassII ,Div 1,Groups E,F &G CSA Allwitha SeriesHS, H1,F, 8 or9 electricswitch ClassI,Div 2,Groups B,C &D m echanism and a housinglistedas CSA TYPE 4X Allw ithan electricswitchm echanism and a housing ClassI,Div 1,Groups C &D listedas TY P E 4X/7/9 ClassII ,Div 1,Groups E,F &G Allw ithan electricswitchm echanism and a housing ClassI,Div 1,Groups B,C &D listedas TY P E 4X/7/9 ClassI,Div 1,Group B ClassII ,Div 1,Groups E,F &G AT EX /IEC Ex Allwithan electricswitchmechan ism and an ATEX II 2 G EEx d II C T6 ATEX housin g 94/9 /EC IECEx Ex d II C T6 IP66 CE Allm odels InstallationCategory II Po llutionD egree2 Low VoltageD irectives 2006/95/EC perHarm onized Standard EN 61010-1/1993 &Amend ment No. 1 A G E N C Y A P P R O V A L S Pivot Return Spring Process Liquid Process Liquid Rising Level Fa lling Level T E C H N O L O G Y A permanentmagn et isattached to a pivoted switch actuator .As the floatordisplacer rises withthe liquidlevel,itraises the attraction sleeve intothe fieldofthe magn et,wh ich then snaps against thenon-mag netic enclosing tube ,actuating the switch .The enclosingtubeprovides a static pressureboundary between the switch m echanism and theprocess.On a falling level,an inconelspring retractsthemag net,deactuating the switch. Controlswithtwo ormore HS orH1 switchesarenotATEX approved. IECInstallationInstructions: The cableentryand closingdevicesshallbe Ex d certifiedsuitablefortheconditionsofuse and correctlyinstalled. For ambienttemperaturesabove +55°C orforprocesstemperaturesabove +150°C,suitableheatresistantcablesshallbe used. Heat extensions(betweenprocessconnectionand housing)shallneverbe insulated. Specialconditionsforsafeuse: When theequipmentisinstalledinprocesstemperatureshigherthan+85°C thetemperatureclassificationmust be reduced accordingtothefollowingtableas perIEC60079-0. Maximum Process Temperature Temperature Classification < 85°C T6 < 100°C T5 < 135°C T4 < 200°C T3 < 300°C T2 < 450°C T1 These unitsareinconformitywithIECExKEM 05.0020X ClassificationEx d II C T6 Tambient -40°C to+70°C

SERIES F, HS,H1,8 & 9 HE RM ETICA LLY SEALED SWITC HE S

Idealforuse insaltand othercorrosiveatmospheres
E ntire switch m echanism and contacts arecontained w ithin a positively pressurizedcapsule withSeries “HS” and “H1”
Process tem peratures to+1000°F (+538°C) SERIESJ& K PNEU MA TIC SWI TCHES
Suitedforapplications w here electricalpower is notavailable
Bleedand non-bleed designs
Process temperaturesto+400°F (+204°C) SERIESB,C,D & R DR Y CON TA CT SWI TCHES
Designs forAC and DC currentapplications
Process temperaturesto+1000°F (+538°C) S P E C I F I C A T I O N S S W I T C H M E C H A N I S M S A N D E N C L O S U R E S SW ITCH E NC LO SUR E S
TYPE 4X /7/9 alum inum enclosures
Des igned tom eetC lass I,Div.1,Groups C & D and C lass I,Div.1 Group B
C astiron TYPE 4X /7/9 enclosures for hazardous areas greaterthan +750° F (+399°C )
Op tionalhousing heatersand drainsavailableforsome enclosures
Pneum aticsw itch m echanism s available witha NE MA 1 enclosure Voltage SwitchSeriesand Non-InductiveAmpere Rating B C D F HS H1 R 8 9 240VDC 0.25 0.50 3.00 — 0.25 — — — —

Code Temp. °F HL LL HL LL HL LL HL LL HL LL HL LL HL LL A S M E B 3 1 . 3 D I S P L A C E R M O D E L S DISPLACER MOD ELS WITH 1"PROCESS CO NNECTI ONS – INCHES Forfloatoperated units,levels aredependentupon the specificgravityoftheprocess m edia. NOTE: Actuationlevelsforsaturatesteam serviceratingsare shown forsingleswitchunitswith1" process connectionsonly. Consultfactoryforunitswithtwo and threesetpointand 1 1⁄2" or2" processconnections. A S M E B 3 1 . 1 A C T U A T I N G L E V E L S SATURA TED STEAM SERVICE RAT INGS ( See model selection chartsformax imum ratings) ASM E B31.1 SEALED CA GE MO DELS WI TH 1"PRO CESS CO NNEC TIONS INCHES MILLIMETERS ASM E B31.1 FLANGED CA GE MOD ELS W/1" PRO CESS CO NNECTI ONS – IN CHES ASM E B31.1 FLANGED CA GE MOD ELS W/1" PRO CESS CO NNECTI ONS – MILLIMETERS Sealed ActuationLevels Cage Pressure Temperature Specific Models (psig) (°F) Gravity HL LL B35 812 520 0.76 3.33 3.91 C35 379 443 0.83 4.05 4.57 G35 546 476 0.80 4.33 4.77 V35 1044 550 0.74 3.19 3.81 Z35 1113 558 0.73 3.39 3.97 Sealed ActuationLevels Cage Pressure Temperature Specific Models (bar) (°C) Gravity HL LL B35 56 271 0.76 85 99 C35 26 227 0.83 103 116 G35 38 247 0.80 110 121 V35 72 288 0.74 81 97 Z35 77 292 0.73 86 101 Flanged Head ActuationLevels Cage Flange Pressure Temperature Specific Models Lbs. (psig) (°F) Gravity HL LL 150 201 388 0.87 3.32 4.13 B3F 300 601 489 0.79 2.82 3.53 600 819 523 0.76 2.67 3.57 150 201 388 0.87 5.32 5.75 G3F 300 601 481 0.79 4.62 5.06 600 819 523 0.76 4.29 5.00 K3F 600 1123 559 0.73 4.21 4.65 Flanged Head ActuationLevels Cage Flange Pressure Temperature Specific Models Lbs. (bar) (°C) Gravity HL LL 150 14 199 0.87 84 105 B3F 300 41 254 0.79 72 90 600 56 271 0.76 68 91 150 14 199 0.87 135 146 G3F 300 41 249 0.79 117 129 600 56 271 0.76 109 127 K3F 600 77 293 0.73 107 118 600 78 293 0.73 89 104 Z3F 900 108 317 0.68 81 98 Levels ± 0.2 5" (6m m ) Levels± 0.2 5" (6m m ) Levels ± 0.2 5" (6mm) Levels ± 0.2 5" (6m m ) Levels ± 0.2 5" (6mm)

Forfloatoperated units,minimu m specificgravityand actuating levels varydepending upon thematerialof constructioncode used withthe unit. Fordisplaceroperatedunits,minimu m specific gravityand actuating levelsvary depending upon the temperatureatw hichthe unitisoperated. NOTE: The minimum specificgravityand actuatinglevelsshown areforsingleswitchunitswith1" processconnectionsonly. Mi nimu m specificgravityand levelswillchange for m ultistage units and levelswillchange forunitswith 11⁄2" or2" process connections.C onsultfactoryforthese changes. The leveldecalson the controlidentify the actuation levelsatthe corresponding m inimum specificgravity. A S M E B 3 1 . 3 A C T U A T I N G L E V E L S ASME B3 1.3 SEALED CA GE M OD ELS WIT H 1"PROCESS CONNEC TIONS INCH ES M ILLIMETERS Models w/Mat.ofConst. Models w/Mat.ofConst. Code 1 Code 2 Model Min. ActuatingLevel Min. ActuatingLevel Gr. HL LL Gr. HL LL Models w/Mat.ofConst. Models w/Mat.ofConst. Code 1 Code 2 Model Min. ActuatingLevel Min. ActuatingLevel Gr. HL LL Gr. HL LL B35 0.69 78 92 0.72 78 96 C35 0.57 80 98 0.59 78 101 G35 0.55 82 97 0.56 81 99 K35 0.40 90 103 0.40 86 102 L35 0.41 84 101 0.43 85 105 V35 0.71 78 97 0.75 76 92 Z35 0.66 75 92 0.68 74 88 ASME B3 1.3 FLANGED CA GE M OD ELS WIT H 1"PRO CESS CO NNEC TIONS INCH ES M ILLIMETERS Models w/Mat.ofConst. Models w/Mat.ofConst. Head Code 1 Code 2 Model Flg. Min. ActuatingLevel Min. ActuatingLevel Gr. HL LL Gr. HL LL 150 0.78 76 98 0.83 75 103 B3F 300 0.66 55 75 0.68 53 79 600 0.66 52 79 0.71 56 75 150 0.41 91 108 0.43 92 112 G3F 300 0.55 89 104 0.56 88 106 600 0.70 102 122 0.76 105 121 150 0.33 78 92 0.33 75 93 K3F 300 0.40 77 90 0.40 75 91 600 0.60 84 98 0.62 87 99 600 0.67 79 97 0.70 79 93 Z3F 900 0.67 79 97 0.70 79 93 Models w/Mat.ofConst. Models w/Mat.ofConst. Head Code 1 Code 2 Model Flg. Min. ActuatingLevel Min. ActuatingLevel Gr. HL LL Gr. HL LL A S M E B 3 1 . 3 D I S P L A C E R M O D E L S LiquidSpecificGravity Code Temp. °C HL LL HL LL HL LL HL LL HL LL HL LL HL LL 38 33 121 55 127 69 131 80 134 87 136 93 138 98 140 B34 93 31 119 54 126 69 130 79 133 87 136 93 137 98 139 149 30 117 53 124 68 129 78 132 86 135 92 137 98 138 38 116 214 146 227 167 235 181 241 191 246 200 249 207 252 93 106 205 140 219 160 229 176 235 187 241 195 245 203 248 C34 149 97 194 132 210 154 221 170 229 183 235 191 240 198 243 205 n/a n/a 122 200 146 213 164 222 176 229 186 235 194 238 260 n/a n/a 113 189 138 203 157 214 170 222 181 229 189 233 DISPLAC ER MODE LS WITH 1"PRO CESS CONNECT IONS – MILLIMETERS (DisplacerModels cont. from page 6) Levels ± 0.2 5" (6mm) Levels ± 0.2 5" (6mm) Levels± 0.2 5" (6mm) Levels ± 0.2 5" (6mm) Levels± 0.2 5" (6mm)

NEMA 1: 8.50 (216) TYPE 4X/7/9: 10.12 (257) Group B: 10.12 (257) C B (Ref) HL LL A K M Plugged L K K M Plugged K L HL LL G J(Ref) H K M Plugged K L HL LL D E F(Ref) Threaded and Socket Weld Upper Side/Bottom Flanged Upper Side/Bottom Flanged Side/Side Allhousings rotatable360°. Allow 8 inches(203mm) overhead clearance forcoverremoval. D I M E N S I O N A L S P E C I F I C A T I O N S I N C H E S ( m m ) ASM E B31.1 & B31.3 SEALED CAGE MODE LS ConduitConnectionsK ElectricalSwitches TYPE 4X/7/9: 1" NPT Group B: 1" NPT Pneumatic Switches NEMA 1: 1⁄4" NPT Outline Dimensions L M TYPE4X/7/9 TYPE4X/7/9 Group B 4.29 (108) 5.93 (151) NEMA 1 5.00 (127) 4.62 (117)

CH AM BERS W ITH 1 -INCH CO NN ECTIO NS INCH ES M ILLIMETERS CH AM BERS W ITH 1 1⁄2 -INC H CO NN ECTION S INCH ES M ILLIMETERS CH AM BERS W ITH 2- INCH CO NN ECTIONS INCH ES M ILLIMETERS SEALED CAGE M ODELS — ASM E B3 1.1150# & 300 # ANSI PRESSU RE RATINGS ASM E B3 1.3 ALL PRESSURE RATING S D I M E N S I O N A L S P E C I F I C A T I O N S Model Code 1"NPT Threaded & SocketWeld 1"Flanged Upper Side/Bottom 1"Flanged Side/Side 1"NPT Thread & SocketWeld 1"Flanged Upper Side/Bottom 1"Flanged Side/Side A B C D E F G H J A B C D E F G H J A B C D E F H A B C D E F G H J Model Code 11⁄2"NPT Threaded & SocketWeld 11⁄2"Flanged Upper Side/Bottom 11⁄2"Flanged Side/Side 11⁄2"NPT Thread & SocketWeld 11⁄2"Flanged Upper Side/Bottom 11⁄2"Flanged Side/Side A B C D E F G H J A B C D E F G H J B34 Not Available A B C D E F H A B C D E F G H J Model Code 2"NPT Threaded & SocketWeld 21"Flanged Upper Side/Bottom 2"Flanged Side/Side 2"NPT Thread & SocketWeld 2"Flanged Upper Side/Bottom 2"Flanged Side/Side A B C D E F G H J A B C D E F G H J B34 Not Available A B C D E F H A B C D E F G H J

ASM E B31.1 SEALED CAGE M O DELS — 600# & 90 0# ANS IPRESSU RE RATINGS D I M E N S I O N A L S P E C I F I C A T I O N S CH AM BERS W ITH 1 -INCH CO NN ECTIO NS — 600 & 90 0 LB.ANSI CLASS INCH ES MILLIMETERS CH AM BERS W ITH 1 1⁄2 -INC H CO NN ECTION S — 600 & 9 00 LB.ANSI CLASS INCH ES MILLIMETERS CH AM BERS W ITH 2- INCH CO NN ECTIONS — 600 & 9 00 LB.ANSI CLASS INCH ES MILLIMETERS Model Code 1"NPT Threaded & SocketWeld 1"Flanged Upper Side/Bottom 1"Flanged Side/Side 1"NPT Thread & SocketWeld 1"Flanged Upper Side/Bottom 1"Flanged Side/Side A B C D E F G H J A B C D E F G H J Model Code 11⁄2"NPT Threaded & SocketWeld 11⁄2"Flanged Upper Side/Bottom 11⁄2"Flanged Side/Side 11⁄2"NPT Thread & SocketWeld 11⁄2"Flanged Upper Side/Bottom 11⁄2"Flanged Side/Side A B C D E F G H J A B C D E F G H J Model Code 2"NPT Threaded & SocketWeld 2"Flanged Upper Side/Bottom 2"Flanged Side/Side 2"NPT Thread & SocketWeld 2"Flanged Upper Side/Bottom 2"Flanged Side/Side A B C D E F G H J A B C D E F G H J

L HL LL A B NEMA 1: 8.50 (216) TYPE 4X/7/9: 10.12 (257) Group B: 10.12 (257) M C(Ref) K Plugged K D HL LL M K Plugged KK E F(Ref) L K HL LL Plugged K M L J(Ref) G H Allhousings rotatable360°. Allow 8 inches(203mm) overhead clearance forcoverremoval. ConduitConnectionsK ElectricalSwitches TYPE 4X/7/9: 1" NPT Group B: 1" NPT Pneumatic Switches NEMA 1: 1⁄4" NPT D I M E N S I O N A L S P E C I F I C A T I O N S I N C H E S ( m m ) ASM E B31.1 & B31.3 FLANGED CAGE MO DELS Outline Dimensions L M TYPE4X/7/9 TYPE4X/7/9 Group B 3.87 (98) 5.93 (151) NEMA 1 5.00 (127) 4.62 (117)

D I M E N S I O N A L S P E C I F I C A T I O N S CH AM BERS W ITH 1 1⁄2 -INC H CO NN ECTION S INCH ES MILLIMETERS CH AM BERS W ITH 1 -INCH CO NN ECTIO NS INCH ES MILLIMETERS FLANGED CAG E MODELS — ASM E B31.1 150# & 300 # ANSI PRESSU RE RATINGS ASM E B3 1.3 ALL PRESSURE RATING S CH AM BERS W ITH 2- INCH CO NN ECTIONS INCH ES MILLIMETERS *See page 15 forASME B31.1 600# dim ensionalinformation. *See page 15 forASME B31.1 600# dim ensionalinformation. *See page 15 forASME B31.1 600# dim ensionalinformation. M odel Code Head Flg. rating (lbs .) 1"N PT Threaded & SocketWel d 1"Flanged Upper Side/Bottom 1"Flanged Side/Side 1"NPT Thread & SocketWeld 1"Flanged U pper Side/Bottom 1"Flanged Side/Side A B C D E F G H J A B C D E F G H J B3F G3F A B C D E F G H J A B C D E F G H J K3F Mo del Code Head Flg. rating (lbs .) 11⁄2"NPT Threaded & SocketWe ld 11⁄2" Flanged Up perSide/Bottom 11⁄2" Flanged Side/S ide 11⁄2" NPT Thread & SocketWe ld 11⁄2" Flanged Up perSide/B ottom 11⁄2" Flanged Side/Side A B C D E F G H J A B C D E F G H J B3F G3F A B C D E F G H J A B C D E F G H J K3F Mo del Code Head Flg. rating (lbs .) 2"NPT Threaded & SocketWe ld 2" Flanged Up perSide/Bottom 2" Flanged Side/S ide 2" NPT Thread & SocketWe ld 2" Flanged Up perSide/B ottom 2"Flanged Side/Side A B C D E F G H J A B C D E F G H J B3F G3F A B C D E F G H J A B C D E F G H J K3F

CH AM BERS W ITH 2- INCH CO NN ECTIONS INCH ES M ILLIMETERS D I M E N S I O N A L S P E C I F I C A T I O N S CH AM BERS W ITH 1 -INCH CO NN ECTIO NS INCH ES M ILLIMETERS FLANGED CAG E MODELS — ASM E B31.1 600# & 900 # ANSI PRESSU RE RATING CH AM BERS W ITH 1 1⁄2 -INC H CO NN ECTION S INCH ES M ILLIMETERS M odel Code Flg. Size (lbs .) 1"N PT Threaded & SocketWel d 1"Flanged U pper Side/Bottom 1"Flanged Side/Side 1"NPT Thread & SocketWeld 1"Flanged U pper Side/Bottom 1"Flanged Side/Side A B C D E F G H J A B C D E F G H J A B C D F G H J A B C D E F G H J A B C D E F G H J A B C D E F G H J Model Code Flg. Size (lbs .) 11⁄2"N PT Threaded & SocketWel d 11⁄2"Flanged Upper Side/Bottom 11⁄2"Flanged Side/Side 11⁄2"NPT Thread & SocketWeld 11⁄2"Flanged U pper Side/Bottom 11⁄2"Flanged Side/Side A B C D E F G H J A B C D E F G H J A B C D F G H J A B C D E F G H J A B C D E F G H J A B C D E F G H J Model Code Flg. Size (lbs .) 2"N PT Threaded & SocketWeld 2"Flanged Upper Side/Bottom 2"Flanged Side/Side 2"NPT Thread & SocketWeld 2"Flanged U pper Side/Bottom 2"Flanged Side/Side A B C D E F G H J A B C D E F G H J A B C D F G H J A B C D E F G H J A B C D E F G H J A B C D E F G H J

A S M E B 3 1 . 1 M O D E L N U M B E R S S E A L E D C A G E M O D E L S MO DEL NU MB ER CODE Mo delsavailableforquickshipm ent,usuallywithin one we ek after factoryreceiptofa com plete purchaseorder, through the E xpedite Ship Plan(ESP) SEALED CA GE SIZE AND TAN K CON NECTI ON TYPE M AT ERIALS OF CO NSTR UC TION PN EUMA TIC SWITC H ME CHA N ISM AND EN CLOSU RE Model Code Minimum Specific Gravit y PressureRating psig@ °F bar @ °C 100 550 750 800 38 288 399 427 Type ConnectionSize C/C 1" 11⁄2" 2" Threaded Std. B20 C20 D20 SocketWeld Std. B30 C30 D30 Cage Mounting ANSI FlangeRating(lbs.) 150 300 600 900 150 300 600 900 150 300 600 900 Flanged Upper Side/ Bottom Std. N30 N40 — — P30 P40 — — Q30 Q40 — — 14" N34 N44 N54 N64 P34 P44 P54 P64 Q34 Q44 Q54 Q64 16" — — N56 N66 — — P56 P66 — — Q56 Q66 Flanged Side/Side Std. S30 S40 — — T30 T40 — — V30 V40 — — 14" S34 S44 S54 S64 T34 T44 T54 T64 V34 V44 V54 V64 16" — — S56 S66 — — T56 T66 — — V56 V66 Switch

Description

Models B35, C35,& G35 Models V35 & Z35 psig bar °F °C inches mm NEMA 1 NEMA 1 SeriesJ BleedType 100 7 400 204 .063 1.6 JGH JGF 60 4 400 204 .094 2.3 JHH JHF 60 4 700 371 .055 1.3 JJH JJF SeriesK Non-Bleed 100 7 400 204 — — — KOF 40 3 400 204 — — KOH — Models are limitedto maximum temperatureratingof selectedswitchmechanism. Minimum specificgravityratingsapplyto singlestage unitsonly.Consultfactoryfortwo orthreestageunits. Models V35 and Z35 contain17–7 ph stainlesssteel floats. Codes fora 16-inchcenterto centerdimension are applicableto Models G35 with600#flangesand Z35 with600&900#flangesonly. Process temperature based on +100°F (+38°C) ambient. For models builtto ASME B31.1inapplicationsover +750°F (+399°C),100%radiographicexaminationis required.Consultfactoryforpricing. HS & H1 switchescan be used withonlymaterialsof constructioncode 1 on models V35 &Z35 P Carbon steelchamber,316L stainlesssteelfloat,400seriesstainlesssteelsleeve,ASME B31.1Construction 7 P22/F22Chrome-Moly chamber,347SS float,400seriesSS sleeve,ASME B31.1Construction,model B35 only

ELECTRIC SWI TCH MECHA NISM AND ENCLO SURE Switch Process Temperature Range °F (°C) Contacts Set Points Models B35,C35 & G35 Models V35 & Z35 TYPE 4X/7/9Aluminum Enclosure ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 SeriesB Snap Switch -40to+250 (-40to+121) SPDT

1 BKA BKJ BCC BKB BKK BC9

2 BLA BLJ BDC BLB BLK BD9

3 BMA BMJ BEC BMB BMK BE9

DPDT 1 BNA BNJ BFC BNB BNK BF9

2 BOA BOJ BGC BOB BOK BG9

-40to+450 (-40to+232) SPDT

1 CKA CKJ CCC CKB CKK CC9

2 CLA CLJ CDC CLB CLK CD9

3 CMA CMJ CEC CMB CMK CE9

DPDT 1 CNA CNJ CFC CNB CNK CF9

2 COA COJ CGC COB COK CG9

-40to+250 (-40to+121) SPDT

1 DKB DKK DC9 DKB DKK DC9

2 DLB DLK DD9 DLB DLK DD9

3 DMB DMK DE9 DMB DMK DE9

DPDT 1 DNB DNK DF9 DNB DNK DF9

2 DOB DOK DG9 DOB DOK DG9

-50to+750 (-46to+399) SPDT 1 FKA FKJ FCC FKB FKK FC9

2 FLA FLJ FDC FLB FLK FD9

DPDT 1 FNA FNJ FFC FNB FNK FF9

2 FOA FOJ FGC FOB FOK FG9

SeriesHS HermeticallySealed 5-amp Snap Switch withWiringLeads -50to+400 (-46to+204) SPDT 1 HMJ HMK N/A HMJ HMK N/A 2 HMN HMP HMN HMP DPDT 1 HMS HMT HMS HMT

2 HMY HMZ HMY HMZ

SeriesHS HermeticallySealed 5-amp Snap Switch withTerminalBlock -50to+400 (-46to+204) SPDT 1 HM3 HM4 HA9 HM3 HM4 HA9 DPDT 1 HM7 HM8 HB9 HM7 HM8 HB9 SeriesH1 HermeticallySealed 1-amp Snap Switch withWiringLeads -50to+750 (-46to+399) SPDT 1 HKJ HKK N/A HKJ HKK N/A DPDT 2 HKN HKP HKN HKP SeriesR High Temperature Snap Switch -40to+750 (-40to+399) SPDT 1 RKB RKK RC9 RKB RKK RC9

2 RLB RLK RD9 RLB RLK RD9

DPDT 1 RNB RNK RF9 RNB RNK RF9

2 ROB ROK RG9 ROB ROK RG9

-50to+750 (-46to+399) SPDT 1 8KA 8KJ 8CC 8KB 8KK 8C9 2 8LA 8LJ 8DC 8LB 8LK 8D9 3 8MA 8MJ 8EC 8MB 8MK 8E9 DPDT 1 8NA 8NJ 8FC 8NB 8NK 8F9 2 8OA 8OJ 8GC 8OB 8OK 8G9 Series9 High Temperature HermeticallySealed Snap Switch -50to+750 (-46to+399) SPDT 1 9KA 9KJ 9CC 9KB 9KK 9C9 2 9LA 9LJ 9DC 9LB 9LK 9D9 3 9MA 9MJ 9EC 9MB 9MK 9E9 DPDT 1 9NA 9NJ 9FC 9NB 9NK 9F9 2 9OA 9OJ 9GC 9OB 9OK 9G9 Switch Process Temp. Range °F (°C) Contacts Set Points CS/Aluminum Cast Iron CS /Aluminum Cast Iron NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B SeriesR High Temperature Snap Switch -40to+1000 (-40to+538) SPDT 1 R1M RKM RKW R1M RKM RKW

2 R3M RLM RLW R3M RLM RLW

DPDT 1 RDM RNM RNW RDM RNM RNW

2 REM ROM ROW REM ROM ROW

-50to+1000 (-46to+538) SPDT 1 9AD 9KD 9KV 9AM 9KM 9KW 2 9BD 9LD 9LV 9BM 9LM 9LW 3 9CD 9MD 9MV 9CM 9MM 9MW DPDT 1 9DD 9ND 9NV 9DM 9NM 9NW 2 9ED 9OD 9OV 9EM 9OM 9OW

except:B3F,G3F, K3F & Z3F with600 lb. Head Flanges Models B3F,G3F, K3F & Z3F with600 & 900 lb. Head Flanges psig bar °F °C inches mm NEMA 1 NEMA 1 SeriesJ BleedType 100 7 400 204 .063 1.6 JGH JGF 50 4 400 204 .094 2.3 JHH JHF 60 4 700 371 .055 1.3 JJH JJF SeriesK Non-Bleed 100 7 400 204 — — — KOF 40 3 400 204 — — KOH — A S M E B 3 1 . 1 M O D E L N U M B E R S F L A N G E D C A G E M O D E L S MO DEL NUMB ER CODE Mo delsavailableforquickshipm ent,usuallywithin one week afterfactory receiptof a purchase order,through theE xpedite Ship Plan(ESP) CA G E SIZEAN D TA N K CON NE CT ION TYP E P Carbon steelchamber,316L stainlesssteelfloat,400stainlesssteelsleeve,ASME B31.1Construction M AT ERIALS OF CON STRUCT ION PN EUM AT IC SWI TCH ME CHA NISM AND ENCL OSURE Model Code Head Flange ANSI Class Minimum S. G. Gravit y PressureRating psig@ °F bar @ °C 1 100 550 750 800 38 288 399 427 B3F G3F 900# 1645 1645 1425 1185 151.2 113.4 98.3 81.7 Connection Type ConnectionSize C/C 1" 11⁄2" 2" ANSI Head FlangeRating(lbs.) 150 300 600 900 150 300 600 900 150 300 600 900 Threaded Std. B20 B60 B80 B40 C20 C60 C80 C40 D20 D60 D80 D40 SocketWeld Std. B30 B70 B90 B50 C30 C70 C90 C50 D30 D70 D90 D50 Flanged Upper Side/ Bottom Std. N30 N40 — — P30 P40 — — Q30 Q40 — — 14" N34 N44 N54 N64 P34 P44 P54 P64 Q34 Q44 Q54 Q64 16" — — N56 N66 — — P56 P66 — — Q56 Q66 Flanged Side/Side Std. S30 S40 — — T30 T40 — — V30 V40 — — 14" S34 S44 S54 S64 T34 T44 T54 T64 V34 V44 V54 V64 16" — — S56 S66 — — T56 T66 — — V56 V66 Min imum specificgravity ratings apply to single stageunitsonly.Co nsult factory fortwo orthreestage units. M odelsare limitedto m aximum tempe rature ratingof selected sw itch mechan ism. Mo delsZ3F &K 3F contain 7– 17 ph stainless steelfloats. Co des for a 16 inch center to center dimension are applicableto mod els G 3F and Z3F w ith 600# flanges only. Co des for an 18-inch center to center dime nsion are applicable to K3F mod elonly. Process temp erature based on +100°F (+38°C)amb ient. Fo r mo dels built to ASME B31.1in applications over +750° F (+39 9 °C), 100% radiographic examination is required.Consultfactory forpricing. HS &H 1 sw itches can be used withonly materials ofconstructioncode 1 on allmod elsw ith 600# or900# AN SIrating.

ELECTRIC SWI TCH MECHA NISM AND ENCLO SURE Switch Process Temperature Range °F (°C) Contacts Set Points Allmodels exceptB3F,G3F,K3F & Z3F with600#or 900#ANSI ratings Models B3F,G3F,K3F & Z3F with600#or 900#ANSI ratings TYPE 4X/7/9Aluminum Enclosure ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 SeriesB Snap Switch -40to+250 (-40to+121) SPDT DPDT 1 BNA BNJ BFC BNB BNK BF9 -40to+450 (-40to+232) SPDT DPDT 1 CNA CNJ CFC CNB CNK CF9 -40to+250 (-40to+121) SPDT DPDT 1 DNB DNK DF9 DNB DNK DF9 -50to+750 (-46to+399) SPDT 1 FKA FKJ FCC FKB FKK FC9 DPDT 1 FNA FNJ FFC FNB FNK FF9 SeriesHS HermeticallySealed 5-amp Snap Switch withWiringLeads -50to+400 (-46to+204) SPDT 1 HMJ HMK N/A HMJ HMK N/A 2 HMN HMP HMN HMP DPDT 1 HMS HMT HMS HMT SeriesHS HermeticallySealed 5-amp Snap Switch withTerminalBlock -50to+400 (-46to+204) SPDT 1 HM3 HM4 HA9 HM3 HM4 HA9 DPDT 1 HM7 HM8 HB9 HM7 HM8 HB9 SeriesH1 HermeticallySealed 1-amp Snap Switch withWiringLeads -50to+750 (-46to+399) SPDT 1 HKJ HKK N/A HKJ HKK N/A DPDT 2 HKN HKP HKN HKP SeriesR High Temperature Snap Switch -40to+750 (-40to+399) SPDT 1 RKB RKK RC9 RKB RKK RC9 DPDT 1 RNB RNK RF9 RNB RNK RF9 -50to+750 (-46to+399) SPDT 1 8KA 8KJ 8CC 8KB 8KK 8C9 2 8LA 8LJ 8DC 8LB 8LK 8D9 3 8MA 8MJ 8EC 8MB 8MK 8E9 DPDT 1 8NA 8NJ 8FC 8NB 8NK 8F9 2 8OA 8OJ 8GC 8OB 8OK 8G9 Series9 High Temperature HermeticallySealed Snap Switch -50to+750 (-46to+399) SPDT 1 9KA 9KJ 9CC 9KB 9KK 9C9 2 9LA 9LJ 9DC 9LB 9LK 9D9 3 9MA 9MJ 9EC 9MB 9MK 9E9 DPDT 1 9NA 9NJ 9FC 9NB 9NK 9F9 2 9OA 9OJ 9GC 9OB 9OK 9G9 Switch Process Temp. Range °F (°C) Contacts Set Points CS/Aluminum Cast Iron CS /Aluminum Cast Iron NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B SeriesR High Temperature Snap Switch -40to+1000 (-40to+538) SPDT 1 R1M RKM RKW R1M RKM RKW DPDT 1 RDM RNM RNW RDM RNM RNW -50to+1000 (-46to+538) SPDT 1 9AD 9KD 9KV 9AM 9KM 9KW 2 9BD 9LD 9LV 9BM 9LM 9LW 3 9CD 9MD 9MV 9CM 9MM 9MW DPDT 1 9DD 9ND 9NV 9DM 9NM 9NW 2 9ED 9OD 9OV 9EM 9OM 9OW

PN EUM AT IC SWI TCH ME CHA NISM AND ENCL OSURE Type Size C/C 1" 11⁄2" 2" Threaded Std. B20 C20 D20 SocketWeld Std. B30 C30 D30 Cage Mounting ANSI FlangeRating(lbs.) 150 300 600 900 150 300 600 900 150 300 600 900 Flanged Upper Side/ Bottom Std. N30 N40 N50 N60 P30 P40 P50 P60 Q30 Q40 Q50 Q60 14" N34 N44 N54 N64 P34 P44 P54 P64 Q34 Q44 Q54 Q64 16" N36 N46 N56 N66 P36 P46 P56 P66 Q36 Q46 Q56 Q66 Flanged Side/Side Std. S30 S40 S50 S60 T30 T40 T50 S60 V30 V40 V50 V60 14" S34 S44 S54 S64 T34 T44 T54 S64 V34 V44 V54 V64 16" S36 S46 S56 S66 T36 T46 T56 S66 V36 V46 V56 V66 Switch Models B35,C35, G35,K35 & L35 withMaterialof Constr.Code 1 Models B34,V35, Z35 & AllModels withMaterialof Constr.Code 2 psig bar °F °C inches mm NEMA 1 NEMA 1 SeriesJ BleedType 100 7 400 204 .063 1.6 JGH JGF 60 4 400 204 .094 2.3 JHH JHF 60 4 700 371 .055 1.3 JJH JJF SeriesK Non-Bleed 100 7 400 204 — — — KOF 40 3 400 204 — — KOH — A S M E B 3 1 . 3 M O D E L N U M B E R S S E A L E D C A G E M O D E L S MO DEL NUMB ER CODE TAN K CON N ECTION TYPE AN D SIZE 1 Carbon steelchamber,316L stainlesssteel float,400stainlesssteelsleeve,ASME B31.3construction 2 Carbon steelchamber,316L stainlesssteelfloat,316 stainlesssteelsleeve,ASME B31.3construction M AT ERIALS OF CO NSTR UC TION Model Code Min.S.G.forModels withMaterialof ConstructionCode PressureRating psig@ °F bar @ °C 1 2 100 550 750 800 900 1000 38 288 399 427 482 538 FLOAT MODELS Min imum SG ratings apply to singlestage units.Co nsult factoryfortwo and three stage units. Mo dels are limited to m aximum temp erature rating of selected switch mech anism. Consultfactory for14" center-to-centerdime nsions on mo delsK35 &B34. Mo delsV35 and Z35 contain 17–7ph stainless steelfloats. Consultfactory forMo delB34 above +300°F (+149 ° C).Available with singlesw itch only. Codes 1 1⁄2" and 2" NP T tank connections are not applicable to the B34 displacermo del. Co des for a 16" center-to-center dimen sion are applicable to the K3 5 mo delonly. Process temp eraturebased on +100°F (+38° C)ambient. On conden sing ap plications,temperat ure do wn -rated to +400° F (+204° C)process at+100°F (+38°C)ambient. HS &H1 switches can be used w ith only materials ofconstruction code 1 on mo dels V35 &Z35

ELECTRIC SWI TCH MECHA NISM AND ENCLO SURE Switch Process Temperature Range °F (°C) Contacts Set Points Models B35,C35,K35 & L35 withMaterialofConstructionCode 1 Models B34,V35,Z35 & allmodels withMaterialofConstructionCode 2 TYPE 4X/7/9Aluminum Enclosure ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 SeriesB Snap Switch -40to+250 (-40to+121) SPDT DPDT 1 BNA BNJ BFC BNB BNK BF9 -40to+450 (-40to+232) SPDT DPDT 1 CNA CNJ CFC CNB CNK CF9 -40to+250 (-40to+121) SPDT DPDT 1 DNB DNK DF9 DNB DNK DF9 -50to+750 (-46to+399) SPDT 1 FKA FKJ FCC FKB FKK FC9 DPDT 1 FNA FNJ FFC FNB FNK FF9 SeriesHS HermeticallySealed 5-amp Snap Switch withWiringLeads -50to+550 (-46to+288) SPDT 1 HMJ HMK N/A HMJ HMK N/A 2 HMN HMP HMN HMP DPDT 1 HMS HMT HMS HMT SeriesHS HermeticallySealed 5-amp Snap Switch withTerminalBlock -50to+550 (-46to+288) SPDT 1 HM3 HM4 HA9 HM3 HM4 HA9 DPDT 1 HM7 HM8 HB9 HM7 HM8 HB9 SeriesH1 HermeticallySealed 1-amp Snap Switch withWiringLeads -50to+750 (-46to+399) SPDT 1 HKJ HKK N/A HKJ HKK N/A DPDT 2 HKN HKP HKN HKP SeriesR High Temperature Snap Switch -40to+750 (-40to+399) SPDT 1 RKB RKK RC9 RKB RKK RC9 DPDT 1 RNB RNK RF9 RNB RNK RF9 -50to+750 (-46to+399) SPDT 1 8KA 8KJ 8CC 8KB 8KK 8C9 2 8LA 8LJ 8DC 8LB 8LK 8D9 3 8MA 8MJ 8EC 8MB 8MK 8E9 DPDT 1 8NA 8NJ 8FC 8NB 8NK 8F9 2 8OA 8OJ 8GC 8OB 8OK 8G9 Series9 High Temperature HermeticallySealed Snap Switch -50to+750 (-46to+399) SPDT 1 9KA 9KJ 9CC 9KB 9KK 9C9 2 9LA 9LJ 9DC 9LB 9LK 9D9 3 9MA 9MJ 9EC 9MB 9MK 9E9 DPDT 1 9NA 9NJ 9FC 9NB 9NK 9F9 2 9OA 9OJ 9GC 9OB 9OK 9G9 Switch Process Temp. Range °F (°C) Contacts Set Points CS/Aluminum Cast Iron CS /Aluminum Cast Iron NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B SeriesR High Temperature Snap Switch -40to+1000 (-40to+538) SPDT 1 R1M RKM RKW R1M RKM RKW DPDT 1 RDM RNM RNW RDM RNM RNW -50to+1000 (-46to+538) SPDT 1 9AD 9KD 9KV 9AM 9KM 9KW 2 9BD 9LD 9LV 9BM 9LM 9LW 3 9CD 9MD 9MV 9CM 9MM 9MW DPDT 1 9DD 9ND 9NV 9DM 9NM 9NW 2 9ED 9OD 9OV 9EM 9OM 9OW

A S M E B 3 1 . 3 a n d N A C E M O D E L N U M B E R S F L A N G E D C A G E M O D E L S M OD EL NUMB ER COD E TANK CON NE CT ION TYPE AN D SIZE PN EU MA TIC SW ITCH ME CHA NISM AND ENC LOSU RE 1 Carbon steelchamber,316L stainlesssteelfloat,400stainlesssteelsleeve,ASME B31.3Construction 2 Carbon steelchamber,316L stainlesssteelfloat,316 stainlesssteelsleeve,ASME B31.3Construction N Carbon steelchamber,316L stainlesssteelfloat,316 stainlesssteelsleeve,NACE and ASME B31.3Construction M AT ERIALS OF CO NST RU CTIO N NACE construction:floatcage istherma llystressrelieved afterwelding,then hardness tested toassure com pliance.Com plies with NACE MR0 175 & MR 0103 latestrevisions. Model Code Head Flange ANSI Class Min.S.G.forModels withMaterialof ConstructionCode PressureRating psig@ °F bar @ °C 1 2 or N 100 550 750 800 900 1000 38 288 399 427 482 538 FLOAT MODELS B3F G3F K3F DISPLACER MODELS 100 300 500 n/a 100 300 500 n/a C34 300# n/a 740 655 600 51.0 45.2 41.1 600# 1480 1310 1200 102.0 90.7 82.7 Connection Type Size C/C 1" 11⁄2" 2" ANSI Head FlangeRating(lbs.) 150 300 600 900 150 300 600 900 150 300 600 900 Threaded s/b Std. B20 B60 B80 B40 C20 C60 C80 C40 D20 D60 D80 D40 SocketWeld s/b Std. B30 B70 B90 B50 C30 C70 C90 C50 D30 D70 D90 D50 Flanged Upper Side/ Bottom Std. N30 N40 N50 N60 P30 P40 P50 P60 Q30 Q40 Q50 Q60 14" N34 N44 N54 N64 P34 P44 P54 P64 Q34 Q44 Q54 Q64 16" N36 N46 N56 N66 P36 P46 P56 P66 Q36 Q46 Q56 Q66 Flanged Side/Side Std. S30 S40 S50 S60 T30 T40 T50 T60 V30 V40 V50 V60 14" S34 S44 S54 S64 T34 T44 T54 T64 V34 V44 V54 V64 16" S36 S46 S56 S66 T36 T46 T56 T66 V36 V46 V56 V66 Switch exceptB 3F,C34,K34, G3 F & Z3F with 600#or 900#AN SI rating M odelC34 and AllMode ls with M aterialofCons truc - tion Co de 2 orN and B3F , G 3F,K 3F & Z3F w ith 600#or900#A NSI rating psig bar °F °C inches mm NEMA 1 NEMA 1 SeriesJ BleedType 100 7 400 204 .063 1.6 JGH JGF 50 4 400 204 .094 2.3 JHH JHF 60 4 700 371 .055 1.3 JJH JJF SeriesK Non-Bleed 100 7 400 204 — — — KOF 40 3 400 204 — — KOH — M inimum SG ratings applyto singlestage units.Consultfactoryfortw o and threestage units. Mo dels are lim ited tom axim um tem perature rating ofselected switch mech anism. 600# and 9 00# flanged cage m odels m ustuse switch codes listed underheading “Mod el C34 &AllM odels w/Ma terials ofConstruction Codes 2 orN and B3F ,G 3F, K 3F &Z3F w ith 600# or9 00# AN SIrating”. H S sw itches can be used withMa terials ofConstruction Code 1 only. Examp le:B3F-1B80-H SG . Consultfactory for14" center-to-centerdim ensions on mo dels K3F and C34. Construction Code N is notapplicable tothis unitdue to17–7 ph stainlesssteelfloat m aterial. Consultfactory forM odelC34 up to+750°F (+39 9° C) . Codes for150lb.flanges are notapplicable tothe C34 displacerm odel. Codes fora 16" center-to-centerdim ension are applicable tothe K 3F mod elonly. Process tem perature based on +100°F (+38°C)am bient. O n condensing applications,tem peraturedow n-rated to+400°F (+204°C)processat +100°F (+38°C)am bient. O n condensing applications,tem peraturedow n-rated to+400°F (+204°C)processat +100°F (+38°C)am bient 1 1 1 2

ELECTRIC SWI TCH MECHA NISM AND ENCLO SURE Switch Process Temperature Range °F (°C) Contacts Set Points Allmodels C34 and allmodels withMaterialofConstructionCode 1 exceptB3F,G3F,K3F & Z3F with600#or 900#ANSI ratings Allmodels C34 and allmodels with MaterialofConstructionCodes 2 & N and B3F,G3F,K3F & Z3F with600#or 900#ANSI ratings TYPE 4X/7/9Aluminum Enclosure ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 ClassI,Div1 Groups C&D ClassI,Div1 Group B ATEX Ex II2 G EEx d IICT6 SeriesB Snap Switch -40to+250 (-40to+121) SPDT DPDT 1 BNA BNJ BFC BNB BNK BF9 -40to+450 (-40to+232) SPDT DPDT 1 CNA CNJ CFC CNB CNK CF9 -40to+250 (-40to+121) SPDT DPDT 1 DNB DNK DF9 DNB DNK DF9 -50to+750 (-46to+399) SPDT 1 FKA FKJ FCC FKB FKK FC9 DPDT 1 FNA FNJ FFC FNB FNK FF9 -50to+550 (-46to+288) 1 1 SPDT 1 HMJ HMK N/A HMJ HMK N/A 2 HMN HMP HMN HMP DPDT 1 HMS HMT HMS HMT -50to+550 (-46to+288) 1 1 SPDT 1 HM3 HM4 HA9 HM3 HM4 HA9 DPDT 1 HM7 HM8 HB9 HM7 HM8 HB9 SeriesH1 HermeticallySealed 1-amp Snap Switch withWiringLeads -50to+750 (-46to+399) SPDT 1 HKJ HKK N/A HKJ HKK N/A DPDT 2 HKN HKP HKN HKP SeriesR High Temperature Snap Switch -40to+750 (-40to+399) SPDT 1 RKB RKK RC9 RKB RKK RC9 DPDT 1 RNB RNK RF9 RNB RNK RF9 -50to+750 (-46to+399) SPDT 1 8KA 8KJ 8CC 8KB 8KK 8C9 2 8LA 8LJ 8DC 8LB 8LK 8D9 3 8MA 8MJ 8EC 8MB 8MK 8E9 DPDT 1 8NA 8NJ 8FC 8NB 8NK 8F9 2 8OA 8OJ 8GC 8OB 8OK 8G9 Series9 High Temperature HermeticallySealed Snap Switch -50to+750 (-46to+399) SPDT 1 9KA 9KJ 9CC 9KB 9KK 9C9 2 9LA 9LJ 9DC 9LB 9LK 9D9 3 9MA 9MJ 9EC 9MB 9MK 9E9 DPDT 1 9NA 9NJ 9FC 9NB 9NK 9F9 2 9OA 9OJ 9GC 9OB 9OK 9G9 Switch Process Temp. Range °F (°C) Contacts Set Points CS/Aluminum Cast Iron CS /Aluminum Cast Iron NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B NEMA 4X ClassI,Div1 Groups C&D ClassI,Div1 Group B SeriesR High Temperature Snap Switch -40to+1000 (-40to+538) SPDT 1 R1M RKM RKW R1M RKM RKW DPDT 1 RDM RNM RNW RDM RNM RNW -50to+1000 (-46to+538) SPDT 1 9AD 9KD 9KV 9AM 9KM 9KW 2 9BD 9LD 9LV 9BM 9LM 9LW 3 9CD 9MD 9MV 9CM 9MM 9MW DPDT 1 9DD 9ND 9NV 9DM 9NM 9NW 2 9ED 9OD 9OV 9EM 9OM 9OW

The quality assurance system inplaceat Ma gnetrolguaranteesthehighestlevelofquality throughoutthe compan y.Mag netroliscomm it - tedto providing fullcustomer satisfaction both inquality productsand quality service. M agnetrol’squality assurance system isregis - tered to ISO 9001affirming itscom m itmentto know n internationalqualitystandards providing the strongestassurance ofproduct/service quality available. SeveralSeries3 levelswitchesare available for quick shipment,usuallywithin one week after factory receiptofa purchaseorder,through the Ex pedite ShipPlan (ESP). To take advantage ofE SP,match thecolor coded mo delnum bercodesinthe selection charts(standarddimensionsapply). E SPservice m ay notapply toordersoftenunits orm ore.C ontactyourlocalrepresentativefor leadtimeson largervolume orders,aswellas otherproductsand options. EExpedite SShip PPlan 5300 Be lmont Road • Downers Grove, Illinois 605 15-4499 • 630-969-400 0 • Fax 630-969-9489 • www.magnetrol.com

145 Jardin Drive, Un its 1 & 2 • Concord, Ontari o Canad a L4K 1X7 • 905-738-9600 • Fax 905-738-1306

Heikensstraat 6 • B 924 0 Zele, Belgium • 052 45 .11.11 • Fax 052 45.09.93 Regent Business Ctr., Jubilee Rd. • Burgess Hill, Sus sex RH15 9TL U.K. • 01444-871313 • Fax 01444-871317 Copyright © 2010 Magnetrol International, I ncorporated. A ll rights reserved. Printed in the USA. Performance specifications are effective with d ate of is sue and are subject t o change without notice. Q U A L I T Y E S P W A R R A N T Y B ULLETIN: 46-123.16 EFFECTIV E: August 2010 SU PERSEDES: June 2009 All M agnetrol m echanical level and flow con - trols are warranted free of defects in materials or wo rkma nship for five full years from the date of original factory shipment. If returned w ithin the warranty period; and, upon factory inspection of the control, the cause of the claim is determined to be covered under the w arranty; then, Magnetrol will repair or replace the control at no cost to the purchaser (or own er) other than transportation. M agnetrol shall not be liable for m isapplication, labor claims, direct or consequential damage or expense arising from the installation or use of equipm ent. There are no other warranties expressed or implied, except special written warranties covering som e M agnetrol products. Ma gnetrol and Magnetro l logotype are registered trademarks of Magnetrol International. Hastelloy® is a registered tradem ark of Haynes International, Inc. Mon el® and Inconel® are registered trademarks of Special Metals Corporation (Formerly Inco Alloys International) CS A logotype is a registered trademark of Canadian Standards Association Carpenter 20 is a registred tradem ark of Carpenter Technology Corp. Carbo Zinc ® 11 is a registered trademark of Carboline Company. Amercote ® and Dimetcoat ® are registered tradem arks of Ame rcoat Corporation.

Product Information

G35-PB30-JJF specifications and overview.

Summary

Liquid Level Switches ASME B31.1, ASME B31.3 and NACE Construction

Description

Liquid Level Switches ASME B31.1, ASME B31.3 and NACE Construction

Source title G35-PB30-JJF Datasheet(PDF) - Magnetrol International, Inc.

Related Parts

More parts from the same family.

Browse manufacturer