G1A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage- 50 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ High temperature metallurgically bonded constructed rectifiers ♦ Glass passivated cavity-free junction in D0-204AP package ♦ Hermetically sealed package ♦ 1.0 ampere operation at TA=100°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals:Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS G1A G1B G1D G1G G1J G1K G1M UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 70 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=100°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 50.0 Amps Maximum instantaneous forward voltage at 1.0A V F 1.2 1.1 Volts Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at TA=100°C IR(AV) 200.0 µA Maximum DC reverse current T A=25°C 2.0 at rated DC blocking voltage T A=150°C IR 100.0 µA Typical reverse recovery time (NOTE 1) trr 1.5 µs Typical junction capacitance (NOTE 2) C J 15.0 pF Typical thermal resistance(NOTE 3) R Θ JL 55.0 °C/W Operating junction and storage temperature range TJ, TSTG 65 to +175 °C NOTES: (1) Measured with IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 PATENTED* 0.034 (0.86) 0.028 (0.71) DIA. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 1.0 (25.4) MIN. DO-204AP
0 25 50 75 100 125 150 1750 0.2 0.4 0.6 0.8 1.0 1 10 1000 11 0 1 0 0 0.01 0.1 02 04 0 6 0 80 100 0.01 0.1 RATINGS AND CHARACTERISTIC CURVES G1A AND G1M FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 60 HZ RESISTIVE OR INDUCTIVE LOAD PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C TJ=125°C TJ=75°C AMBIENT TEMPERATURE, °C NUMBER OF CYCLES AT 60 H Z PERCENT OF RATED PEAK REVERSE VOLTAGE, % AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE, VOLTS PEAK FORWARD SURGE CURRENT, AMPERES JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD CURRENT, AMPERES TJ =TJ max. 8.3ms SINGLE HALF SINE-WAVE(JEDEC Method) TJ=25°C f=1.0 MHz Vsig=50mVp-p 0.375" (9.5mm) LEAD LENGTH CAPACITANCE LOAD Ipk/I AV= 5.0 TJ=25°C TJ=150°C