G104X1-L01

G104X1-L01 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 26

Technical content

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Appr oval Version2.2 TFT LCD Approval Specification MODEL NO.: G104X1 - L01 記錄 工作 審核 角色 投票 2008-10-06 10:53:31 CST PMMD Director cs_lee(李志聖 /17564/44926) Director Accept Customer: Approved by: Note: FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA 92656

Http://www.AZDISPLAYS.com

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 - CONTENTS - 1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5.1 TFT LCD MODULE

5.2 BLOCK DIAGRAM OF INTERFACE

5.3 BACKLIGHT UNIT

5.4 LVDS INTERFACE

5.5 COLOR DATA INPUT ASSIGNMENT

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8.1 CMO MODULE LABEL

9.1 PACKING SPECIFICATIONS

9.2 PACKING METHOD

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2

REVISION HISTORY

(New) Section Description Ver 2.0 Ver 2.1 Ver 2.2 Apr. 17, ‘07 Oct. 9, ‘07 Aug. 26, ‘08 All All 2.1 4.1 7.2 1.2 7.2 7.2 10.1 Approval Specification was first issued. Modify ABSOLUTE RATINGS OF ENVIRONMENT Storage Temperature ： (-20) ~ (+65) Æ (- 20) ~ (+80) Operating Ambient temperature ：(-10) ~ (+60) Æ (-20) ~ (+70) Correct TFT LCD Module Figure. (Remove frame buffer) Modify OPTICAL SPECIFICATIONS：Color Chromaticity (the same as G104X1-P01) Rx 0.631 Æ0.629 Ry 0.349 Æ0.348 Gx 0.306 Æ0.306 Gy 0.569 Æ0.560 Bx 0.150 Æ0.150 By 0.113 Æ0.102 Wx 0.336 Æ0.329 Wy 0.357 Æ 0.346 MECHANICAL CHARACRTERISTIC Remove CMO Logo on metal frame from the drawing. Add aluminum foil on metal frame. Modify Features：Fast response time Ton+Toff average 40 ms Æ Ton+Toff average 25 ms Modify Response Time T R：30 Æ 14 ms Typ. 35 Æ 19 ms Max. TF：10 Æ 11 ms Typ. 15 Æ 16 ms Max. Note(6) Update Measurement Setup Diagram Add precaution of “Image sticking” in section 10.1 Assembly and handling precautions (11) Do not keep same pattern in a long period of time. It may cause image sticking on LCD

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 1. GENERAL DESCRIPTION G104X1- L01 is a 10.4” TFT Liquid Crystal Display module with 2-CCFL backlight unit and 30-pin-and-1ch LVDS interface. This product supports 1024 x 768 XG A format and can display true 16.2M colors (6-bits colors with FRC). The inverter module for backlight is not built-in.

• Excellent brightness (400 nits) - Ultra high contrast ratio (1200:1) - Fast response time (Ton+Toff average 25 ms) - High color saturation NTSC 57% - XGA (1024 x 768 pixels) resolution - DE (Data Enable) only mode - LVDS (Low Voltage Differential Signaling) interface - Ultra wide viewing angle: 176(H)/ 176(V) (CR>10) Super MVA technology -180 degree rotation display option -Color reproduction (Nature color) -Wide operation and storage temperature range (-20℃ to 70 ℃ operation, -20 ℃ to 80 ℃ storage)

-TFT LCD for Avionics and Industrial applications - High brightness, multi-applications display

1.4 GENERAL SPECIFICATI0NS

Item Specification Unit Note Active Area 210.4 (H) x 157.8 (V) (10.4” diagonal) mm Bezel Opening Area 215.4 (H) x 161.8 (V) mm (1) Driver Element a-si TFT active matrix - - Pixel Number 1024 x R.G.B. x 768 pixel - Pixel Pitch (Sub Pixel) 0.0685 (H) x 0.2055 (V) mm - Pixel Arrangement RGB vertical stripe - - Display Colors 16.2 M color - Display Operation Mode Transmissive mode / Normally black - - Surface Treatment Anti-Glare coating (Haze 25%) Hard coating (3H) - - Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Item Min. Typ. Max. Unit Note Horizontal (H) 225 225.5 226 mm Vertical (V) 175.8 176.3 176.8 mm (1) Module Size Depth (D) 9.67 10.17 10.67 mm - Weight - 480 - g - Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. 2. ABSOLUTE MAXIMUM RATINGS Test Item Test Condition Note High Temperature Storage Test 80ºC, 240 hours Low Temperature Storage Test -20ºC, 240 hours Thermal Shock Storage Test -20ºC, 0.5hour←→70℃, 0.5hour; 100cycles, 1hour/cycle High Temperature Operation Test 70ºC, 240 hours Low Temperature Operation Test -20ºC, 240 hours High Temperature & High Humidity Operation Test 60ºC, 90%RH, 240hours (1) (2) Shock (Non-Operating) 200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z. (3) Vibration (Non-Operating) 1.5G, 10 ~ 300 Hz , 10min/cycle, 3 cycles each X, Y , Z (3) Note (1) There should be no condensation on the surface of panel during test. Note (2) Temperature of panel display surface area should be 80 ºC Max. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Value Item Symbol Min. Max. Unit Note Power Supply Voltage Vcc -0.3 4.0 V Input Signal Voltage V IN -0.3 3.6 V (1) Note (1) Permanent damage to the device may occur if maximum values are exceeded. Functional operation should be restricted to the conditions described under normal operating conditions.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE T a = 2 5 ± 2 º C

Value Parameter Symbol Min. Typ. Max. Unit Note Power Supply Voltage V CC 3.0 3.3 3.6 V (1) Power Supply Ripple Voltage V RP - - 100 mV Rush Current I RUSH - - 1.8 A (2) White - 1.1 1.4 A Black - 0.8 - A Power Supply Current Vertical Stripe ICC - 1.0 - A (3) Differential Input High Threshold Voltage VLVTH - - +100 mV - Differential Input Low Threshold Voltage VLVTL -100 - - mV - Common Input Voltage V LVC 1.125 1.25 1.375 V - LVDS Interface Terminating Resistor R T 100 ohm - Input High Threshold Voltage V IH 2.7 - 3.3 V - CMOS interface Input Low Threshold Voltage V IL 0 - 0.7 V - Note (1) The assembly should be always operated within above ranges. Note (2) Measurement Conditions:

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, f v = 60 Hz, whereas a power dissipation check pattern below is displayed. Active Area c. Vertical Stripe Pattern R R R R R R R R G G G G B B B B B B G G G G B B B B R R Active Area Active Area a. White Pattern b. Black Pattern Vcc rising time is 470us 470µs +3.3V GND 0.9Vcc 0.1Vcc

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2

3.2.1 CCFL (Cold Cathode Fluorescent Lamp) CHARACTERISTICS (Ta = 25 ± 2 ºC)

Value Parameter Symbol Min. Typ. Max. Unit Note Lamp Voltage V W － 460 － VRMS I L = 7.0mA Lamp Current I L 6.5 7 7.5 mARMS (1) － － 770 VRMS (2) at 25℃ Lamp Starting Voltage V S － － 960 VRMS (2),at 0℃ Operating Frequency F O 45 － 80 KHz (3) Lamp Life Time L BL 50,000 － － Hrs (4) Note (1) Lamp current is measured by utilizing AC current probe and its value is average by measuring master and slave board. Note (2) The lamp starting voltage VS should be applied to the lamp for more than 1 second after startup. Otherwise the lamp may not be turned on. Note (3) The lamp frequency may produce interference with horiz ontal synchronous frequency of the display input signals, and it may result in line flow on the display. I n order to avoid interference, the lamp frequency should be detached from the horizontal synchronous fr equency and its harmonics as far as possible. Note (4) The lifetime of lamp can be defined as the time in which it continues to operate under the condition Ta = 25 ±2 oC and IL = 7 mArms until one of the following events occurs: (a) When the brightness becomes or lower than 50% of its original value. (b) When the effective ignition length becomes ≦ 80% of its original value. (The effective ignition length is a scope that luminance is over 70% of that at the center point.) 4. BLOCK DIAGRAM (1024x3x768) DATA DRIVER IC SCAN DRIVER IC DC/DC CONVERTER & REFERENCE VOLTAGE INPUT CONNECTOR (JAE,FI-XB30SRL-HF11) GND Vcc RX0(+/-) RX1(+/-) RX2(+/-) RX3(+/-) RXCLK (+/-) TIMING CONTROLLER

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2

1. INTERFACE PIN CONNECTION

CN1 Connector Pin Assignment Pin No. Symbol Description Note

1 NC No Connection (2)

2 GND Ground -

3 RX3+ Positive transmission data of pixel 3 -

4 RX3- Negative transmission data of pixel 3 -

5 GND Ground -

6 RXCLK+ Positive of clock -

7 RXCLK- Negative of clock -

8 GND Ground -

9 RX2+ Positive transmission data of pixel 2 -

10 RX2- Negative transmission data of pixel 2 -

11 GND Ground -

12 RX1+ Positive transmission data of pixel 1 -

13 RX1- Negative transmission data of pixel 1 -

14 GND Ground -

15 RX0+ Positive transmission data of pixel 0 -

16 RX0- Negative transmission data of pixel 0 -

17 GND Ground -

18 STV Vertical Start Pulse Output -

19 GND Ground -

20 NC No Connection -

21 NC No Connection -

22 NC No Connection -

23 NC No Connection -

24 RPF Reverse Panel Function (Display Rotation) (3)

25 GND Ground -

26 GND Ground -

27 GND Ground -

28 VCC Power supply: +3.3V - 29 VCC Power supply: +3.3V - 30 VCC Power supply: +3.3V - Note (1) Connector Part No.: JAE,FI-XB30SRL-HF11 or compatible Note (2) Reserved for internal use. Please leave it floating.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (3) Scanning direction: RPF = Low/ floating : normal display (default) RPF = High : display with 180 degree rotation R0~R7 : Pixel R Data , G0~G7 : Pixel G Data , B0~B7 : Pixel B Data , DE : Data enable signal R0-R7 G0-G7 B0-B7 DE Host Graphics Controller TxIN PLL PLL R0-R7 G0-G7 B0-B7 DE DCLK Timing Controller LVDS Transmitter THC63LVDM83A (LVDF83A) LVDS Receiver THC63LVDF84A Rx0+ Rx0- Rx1+ Rx1- Rx2+ Rx2- CLK+ CLK- RxOUT 51Ω 51Ω 51Ω 51Ω 51Ω 51Ω 51Ω 51Ω 51Ω 51Ω 100pF 100pF 100pF 100pF 100pF Rx3- Rx3+

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (1) The system must have the transmitter to drive the assembly. Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is used differentially. Pin Symbol Description Remark

1 LV Ground White

2 HV1 High Voltage Pink

3 HV2 High Voltage Pink

Note (1): Connector Part No: BHR-03VS-1 (JST Mfg. Co., Ltd)

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 PIN INPUT Host TFT-LCD PIN OUTPUT TFT CONTROL INPUT DE RSVD 1 RSVD 2 RSVD 3 TxIN0 TxIN1 TxIN2 TxIN3 TxIN4 TxIN6 TxIN7 TxIN8 TxIN9 TxIN12 TxIN13 TxIN14 TxIN15 TxIN18 TxIN19 TxIN20 TxIN21 TxIN22 TxIN26 TxIN27 TxIN5 TxIN10 TxIN11 TxIN16 TxIN17 TxIN23 TxIN24 TxIN25 TA OUT0+ TA OUT0- TA OUT1+ TA OUT1- TA OUT2+ TA OUT2- TA OUT3+ TA OUT3- Rx 0+ Rx 0- Rx 1+ Rx 1- Rx 2+ Rx 2- Rx 3+ Rx 3- Rx OUT0 Rx OUT1 Rx OUT2 Rx OUT3 Rx OUT4 Rx OUT6 Rx OUT7 Rx OUT8 Rx OUT9 Rx OUT12 Rx OUT13 Rx OUT14 Rx OUT15 Rx OUT18 Rx OUT19 Rx OUT20 Rx OUT21 Rx OUT22 Rx OUT26 Rx OUT27 Rx OUT5 Rx OUT10 Rx OUT11 Rx OUT16 Rx OUT17 Rx OUT23 Rx OUT24 Rx OUT25 DE NC NC NC 24 bit DCLK 31 TxCLK IN TxCLK OUT+ TxCLK OUT- RxCLK IN+ RxCLK IN-

26 RxCLK OUT DCLK

R0~R7: Pixel R Data (7; MSB, 0; LSB) G0~G7: Pixel G Data (7; MSB, 0; LSB) B0~B7: Pixel B Data (7; MSB, 0; LSB) DE : Data enable signal Notes (1) RSVD(reserved)pins on the transmitter shall be “H” or “L”.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 The brightness of each primary color (red, green an d blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter t he color. The table below provides the assignment of color versus data input. Data Signal Red Green Blue Color R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Basic Colors Black Red Green Blue Cyan Magenta Yellow White Gray Scale Of Red Red(0) / Dark Red(1) Red(2) Red(253) Red(254) Red(255) Gray Scale Of Green Green(0) / Dark Green(1) Green(2) Green(253) Green(254) Green(255) Gray Scale Of Blue Blue(0) / Dark Blue(1) Blue(2) Blue(253) Blue(254) Blue(255) Note (1) 0: Low Level Voltage, 1: High Level Voltage 6. INTERFACE TIMING

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Tvd Tvb Tv Th The input signal timing specifications are shown as the following table and timing diagram. Signal Item Symbol Min. Typ. Max. Unit Note Frequency 1/Tc 55 65 75 MH Z LVDS Receiver Clock Input cycle to cycle jitter Trcl - - 200 ps Setup Time Tlvsu 600 - - ps LVDS Receiver Data Hold Time Tlvhd 600 - - ps Frame Rate Fv 50 60 70 Hz Total Tv 770 806 950 Th Tv=Tvd+Tvb Display Tvd 768 768 768 Th - Vertical Active Display Term Blank Tvb 2 38 182 Th - Total Th 1100 1344 1800 Tc Th=Thd+Thb Display Thd 1024 1024 1024 Tc - Horizontal Active Display Term Blank Thb 76 320 776 Tc - Note (1) Since this assembly is operated in DE on ly mode, Hsync and Vsync input signals should be set to low logic level. Otherwise, this assembly would operate abnormally. INPUT SIGNAL TIMING DIAGRAM DE Thb Valid display data (1024 clocks) Tc DCLK Thd DE DATA

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 LVDS RECEIVER INTERFACE TIMING DIAGRAM RXCLK+/- RXn+/- 1T 14 11T 13T Tlvsu Tlvhd Tc

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 0.5≦T1≦10ms 0 ≦T2≦50ms 0 ≦T3≦50ms 500ms ≦T4 50% 50% T6 T5 T3 T1 0.1Vcc

0.9 VCC

0.1VCC Backlight (Recommended) 5 0 0 m s≦T5 100ms≦T6 Power Supply V CC To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below. Note (1) The supply voltage of the external system for the assembly input should follow the definition of Vcc. Note (2) Apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD operation or the LCD turns off before the backlight turns off, the display may momentarily become abnormal screen. Note (3) In case of Vcc is in off level, please keep the level of input signals on the low or keep a high impedance. Note (4) T4 should be measured after the assembly has been fully discharged between power off and on period. Note (5) Interface signal shall not be kept at high impedance when the power is on.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 7. OPTICAL CHARACTERISTICS Ambient Temperature Ta 25±2 oC Ambient Humidity Ha 50±10 %RH Supply Voltage V CC 5.0 V Input Signal According to typical val ue in "3. ELECTRICAL CHARACTERISTICS" Lamp Current I L 7 mA Oscillating Frequency (Inverter) F W 61 KHz Vertical Frame Rate Fr 60 Hz Inverter Sumida IV40090T/B2 The relative measurement methods of optical characteri stics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in Note (6). Item S ymbol Condition Min. T yp. Max. Unit Note Contrast Ratio CR 900 1200 - (2) TR - 14 19 ms Response Time TF - 11 16 ms (3) Center Luminance of White L C 350 400 - cd/m 2 (4) White Variation δW - - 1.4 - (7) Cross Talk CT - - 4 % (5) Rx 0.629 - Red Ry 0.348 - Gx 0.306 - Green Gy 0.560 - Bx 0.150 - Blue By 0.102 - Wx 0.329 - White Wy Typ. -0.03 0.346 Typ. +0.03 (6) Color Chromaticity Color Gamut CG θx=0°, θY =0° Viewing angle at normal direction 55 57 - % NTSC θx+ 80 88 - Horizontal θx- 80 88 - θY+ 80 88 - Viewing Angle Vertical θY- CR≥10 80 88 - Deg. (1)

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (1) Definition of Viewing Angle (θx, θy): Viewing angles are measured by BM5A Note (2) Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (5), where CR (X) is corresponding to the Contrast Ratio of the point X at the figure in Note (7). Note (3) Definition of Response Time (T R, TF): 12 o’clock direction θy+ = 90º 6 o’clock θy- = 90º θx− θx+ θy- θy+ y- x+ N o r m a l θx = θy = 0º θX+ = 90º θX- = 90º Optical Response 100% 90% 10% Gray Level 255 Gray Level 0 Gray Level 255 Time TF TR

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (4) Definition of Luminance of White (LC): Measure the luminance of gray level 255 at center point and 5 points LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (7). Note (5) Definition of Cross Talk (CT): CT = | YB – YA | / YA × 100 (%) Where: YA = Luminance of measured location without gray level 0 pattern (cd/m2) YB = Luminance of measured location with gray level 0 pattern (cd/m2) Note (6) Measurement Setup: The LCD assembly should be stabilized at giv en temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a windless room. Active Area YA, U (D/2,W/8) YA, R (7D/8,W/2) YA, D (D/2,7W/8) YA, L (D/8,W/2) (0, 0) (D,W) Gray 128 Active Area Gray 0 (D/4,W/4) (3D/4,3W/4) (0, 0) YB, U (D/2,W/8) YB, R (7D/8,W/2) YB, D (D/2,7W/8) YB, L (D/8,W/2) (D,W) Gray 128 Gray 0 CS-1000T Field of View = 2º 500 mm LCD Module LCD Panel Center of the Screen Light Shield Room (Ambient Luminance < 2 lux) USB2000

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Note (7) Definition of White Variation (δW): Measure the luminance of gray level 255 at 5 points δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)] D W Active Area Vertical Line Horizontal Line : Test Point X=1 to 5 1 2 3 4 D/4 D/2 3D/4 W/4 W/2 3W/4 X

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 MADE IN TAIWAN E207943 8.DEFINITION OF LABELS The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) Model Name: G104X1-L01 (b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) Serial ID: X X X X X X X Y M D L N N N N Serial ID includes the information as below: (a) Manufactured Date: Year: 0~9, for 2000~2009 Month: 1~9, A~C, for Jan. ~ Dec. D a y : 1 ~ 9 , A ~ Y , f o r 1 st to 31st, exclude I ,O, and U. (b) Revision Code: Cover all the change (c) Serial No.: Manufacturing sequence of product (d) Product Line: 1 -> Line1, 2 -> Line 2, …etc. Product Line Year, Month, Date CMO Internal Use CMO Internal Use Revision CMO Internal Use Serial No. CHI MEI OPTOELECTRONICS X X X X X X X Y M D L N N N N G104X1 -L01 Rev.XX RoHS

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 9. PACKAGING (1) 30 LCD modules / 1 Box (2) Box dimensions : 500(L) X 400 (W) X 330 (H) (3) Weight : approximately 15.5Kg (30 LCD modules per box) Figures 9-1 and 9-2 are the packing method Figure.9-1 packing method

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 Figure. 9-2 Packing method

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 10. PRECAUTIONS (1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD modules in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow, and the starting voltage of CCFL will be higher than that of room temperature. (11) Do not keep same pattern in a long peri od of time. It may cause image sticking on LCD. (1) The startup voltage of a Backlight is approximatel y 1000 Volts. It may cause an electrical shock while assembling with the inverter. Do not disassemble the module or insert anything into the Backlight unit. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) After the module’s end of life, it is not harmful in case of normal operation and storage.

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 11. MECHANICAL CHARACTERISTICS 奇美電子股份有限公司CHI MEI

Issued Date: Aug. 26, 2008 Model No.: G104X1-L01 Approval Version2.2 奇美電子股份有限公司CHI MEI