FX1150 PERKINELMER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Exceptional arc stability
  • High radiant intensity
  • Continuous spectrum UV-VIS-IR
  • Long Life
  • High repetition flash rates
  • Low heat radiation
  • Microsecond flash durations
  • Various envelope materials
  • No warm up period
  • High efficiency output in the blue
  • Simple fiber optic coupling
  • Small size

1100 Series Lite-Pac® Trigger Modules

FX 1101 225 – 1100+ Borosilicate FX 1103 120 – 1100+ VUV FX 1104 225 – 1100+ Borosilicate FX 1106 120 – 1100+ VUV Low Power Air CutoffAir Cutoff OzoneOzone 1.0 0.8 0.6 0.4 0.2 100 150 200 250 300 350 400nm 500 600 700 800 900 1000 1100 PHOTOPIC RESPONSE RELATIVE SPECTRAL RESPONSE OF SILICONBOROSILICATEUV VUV WAVELENGTH IN NANOMETERS AND LIGHT OUTPUT DISTRIBUTION IN % Typical Spectral Distribution of Xenon Flashlamps and Window Transmittance Type Arc Spectral Window Energy Average Voltage Flash Length Distribution Material per Flash Power Rate Life (1) (mm) (nm) (joules) (watts) (Vdc) (Hz) (flashes) FX 1130 225 – 1100+ Borosilicate FX 1132 120 – 1100+ VUV Medium Power FX 1150 225 – 1100+ Borosilicate FX 1152 120 – 1100+ VUV FX 1153 225 – 1100+ Borosilicate FX 1155 120 – 1100+ VUV High Power

<200 +/- 1% CV <0.1 mm 6 FYD 1101 <200 +/- 1% CV <0.1 mm 6 FYD 1101 Jitter (2) Typical Arc Stability (3) W eight Lite-Pac Light Spatial Type (ns) Output Movement (g) <200 1% <0.1 mm 12 FYD 1130 <200 1% <0.1 mm 30 FYD 1150 <200 1% <0.1 mm 30 FYD 1150 High Power Flashlamps Number of flashes to 50% of initial radiometric light output Medium Power Flashlamps Low Power Flashlamps INPUT ENERGY PER FLASH (JOULES) NUMBER OF FLASHES Life vs. Input Energy Low Power Flashlamp at 0.1 joules per flash 100 10 10 1010 7 8 9 10 RADIOMETRIC UVA 320 - 400 nm UVB 290 - 320 nm UVC 190 - 290 nm NUMBER OF FLASHES RELATIVE LIGHT OUTPUT (%) Life vs. Wavelength ARC LENGTH Ø 0.875 Max (22.2 .500 ± .005 (12.7) (0.13) LINE OF DISCHARGE OPTICALLY CLEAR FLAT TOP 4 or 5 x Ø .040 (1.0)TIP OFF BELOW PIN PROFILE .234 ± .046 (5.9) (1.2) .725 ± .015 (18.4) (0.38) FX 1101-1106 ARC LENGTH WINDOW Ø .255 ±.005 (6.5) (0.13) Ø 0.780 Max (19.8) 0.983 ± .022 (25.0) (0.56) .375 ± .010 (13.3) (0.25) .120 Max (3.0) .208 ± .030 (5.3) (0.76) DISCHARGE PATH Ø 0.700 (17.8) FX 1130-1132 ARC LENGTH WINDOW Ø.562 ±.005 (Max. (34.9) .187 ±.010 (4.8) (0.25) DISCHARGE PATH Ø1.137 (28.9) 0.523 ±.010 (13.3) (0.25) 3 X Ø.040 (1.0)PINCHED OFF BELOW PIN PROFILE 2 X Ø.080 (2.0) 1.085 ±.015 (25.0) (0.56) FX 1150-1155

Outline Drawings or Specification Charts E = 1/2 CV 2 where: E = Discharge energy (joules) C = Capacitance (microfarads) V = Discharge voltage (kilovolts) PAVG = E F P AVG = Average power (watts) E = Discharge energy (joules) F = Flash rate (pulses per second) IPK = V(C/L) ½ IPK = Peak discharge current (keep below 1000 amps) L = Circuit inductance (use 0.5µH for best approximation) t1/3 = π (LC)½ t1/3 = Pulse width at 1/3 peak. www.perkinelmer.com/opto © 2001 PerkinElmer, Inc. All rights reserved.

1100 Series Flashlamps

For more information email us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto Note: All specifications subject to change without notice. Note: Peak currents should be kept below 1000 amps. Exceeding this limit could cause envelope fracture, excessive electrode wear and prema- ture darkening. Caution Some glass flashlamps are under high internal pressure, and, if broken, could result in glass particles being blown into the face and hand areas. To prevent injury, wear suitable protective devices such as safety glasses and/or face mask and gloves. Some types of pulsed lamps generate intense ultraviolet radiation which, if not properly shielded from personnel in the area, will cause burns to any exposed skin and especially to the eyes. Do not expose any skin area or the eyes to the direct or reflected radiation of an operating lamp. If you have to view an operating lamp, always use protective covering for exposed skin area and ultraviolet-attenuating goggles for the eyes. USA: PerkinElmer Optoelectronics

35 Congress Street

Salem, MA 01970 Toll Free: (800) 950-3441 (USA) Phone: (978) 745-3200 Fax: (978) 745-0894 Europe: PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 31, D-65199 Weisbaden, Germany Phone: +49 (0) 611-492-437 Asia: PerkinElmer Optoelectronics

47 Ayer Rajah Crescent #06-12

Phone: +65 775 2022 Fax: +65 775 1008 DS-221 Rev A 0901