FSP500-702UC_15 FSP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCRIPTION
FSP500-702UC is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. APPLICATION For standard, advanced server and storage power system.
FEATURES
80 Plus
Low Ripple & Noise Output over voltage protection Short circuit protection on all outputs Resettable power shut down INTERNAL 4 cm fan 100% burn-in under high ambient temperature(50 Vacuum-impregnated transformer MTBF:100K hours at 25 100% Hi-pot tested Line input fuse protection WATTAGE Wattage: 500W DIMENSION Dimension: 240mm(L) x 100mm(W) x 70mm(H) PRODUCT HIGHLIGHT Efficiency Level: Altitude: 2000M INPUT SPECIFICATION Input Range: 90-264 Vac Input Frequency: 47-63 Hz Input Current: 115V@ 10.0 Amps-rms maximum 230V@ 5.0 Amps-rms maximum GENERAL SPECIFICATION Effciency: 80% 230VAC Voltage Regulation: -12V: ±10% SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Hold up Time: 115V/60Hz 16mSec. Minimum@100% Load, 230V/50Hz 16mSec. Minimum,@100% Load Ouput Voltage Regulation: +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum Output Rise Time: 115V-rms/230V-rms 5V 20ms Maximum 115V-rms/230V-rms 12V 20ms Maximum Ripple & Noise: 3.3V:50mV p-p 5V:50mV p-p 12V1:120mV p-p 12V2:120mV p-p 12V3:120mV p-p -12V:120mV p-p 5Vsb:50mV p-p ENVIRONMENTAL SPECIFICATION TEMP.Range: Storage Temperature: - 20°C to + 80 MTBF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25 , 75% output load, and nominal AC inout voltage *Output Voltage and Current Rating +3.3V +5V +12V1 +12V2 +12V3 -12V +5Vsb Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 120mV 120mV 50mV Regulation Load % ±5% ±5% ±5% ±5% ±5% ±10% ±5% Output Max.(A) 24A 20A 15A 15A 15A 0.5A 2.5A Output Min.(A) 0.5A 0.5A NOTES 5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off. The +3.3V and +5V total output shall not exceed 150 watts. Maxmum continuous load combined 12V shall not exceed 35A The total output shall not exceed 500 watts MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for more detail. FSP reserve the right to change the content without prior notice IPC PSU FSP500-702UC