FSP300-70MU FSP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCRIPTION
This is the specification of Model FSP300-70MU;AC-line powered switching power supply with active PFC (Power Factor Correction) circuit, meet EN61000-3-2 and with Full Range Input features. Designed and manufactured by FSP GROUP. The specification below is intended to describe as detailedly as possible the functions and performance of the subject power supply. Any comment or additional requirements to this specification from our customers will be highly appreciated and treated as a new target for us to approach. WATTAGE Wattage: 300W DIMENSION Dimension: 190.0mm(L) x 100.0mm(W) x 40.5mm(H) INPUT SPECIFICATION Input Range: 90-264 Vdc Input Frequency: 47-63 Hz Input Current: 5A(rms) for115VAC, 3A(rms) for230VAC Leakage Current: µA max. @ 264 VAC,63 Hz SAFETY STANDARD APPAOVAL ENVIRONMENTAL SPECIFICATION TEMP.Range: Operating Temperature:0°C to +50°C Storage Temperature: -20°C to + *Output Voltage and Current Rating +3.3V Ripple-Noise(R-P) mV 0mV Regulation Load % ±5% Output Max.(A) Output Min.(A) NOTES (1) The +12V1 and +12V2 and +5V and +3.3V total output shall not exceed 281W. (2)The +12V1 and +12V2 total output shall not exceed 20A. (3)The +3.3V and +5V total output shall not exceed 120 watts. (4)Total output for this subject power supply is 300 watts. (5)Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading. MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for more detail. FSP reserve the right to change the content without prior notice Medical PSU FSP300-70MU