FSP200-62DL_15 FSP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCRIPTION
FSP200-62DL(24V) is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 200 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. APPLICATION For standard, advanced server, communication and industrial power system.
FEATURES
Low Ripple & Noise Output over voltage protection Short circuit protection on all outputs Resetable power shut down 100% burn-in under high ambient temperature(50 Vacuum-impregnated transformer MTBF:100K hours at 25 100% Hi-pot tested line input fuse protection WATTAGE Wattage: 200W DIMENSION Dimension: 150mm(L) x 81.5mm(W) x 40.5mm(H) PRODUCT HIGHLIGHT Efficiency Level: NON-80PLUS Altitude: 2000M PMBus: For standard, advanced server, communication and industrial power system. INPUT SPECIFICATION Input Range: -18--36 Vdc Input Current: 15A GENERAL SPECIFICATION Voltage Regulation: -12V, -5V: ±10% PWOK Delay Time: 500ms > PWOK > 100ms SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Ouput Voltage Regulation: +3.3Vdc output : +3.7 Vdc minimum, + 4.1Vdc maximum +5Vdc output : +5.7 Vdc minimum, + 6.5Vdc maximum +12Vdc output : +13.1 Vdc minimum, + 14.5Vdc maximum Output Rise Time: DC input -24V 5V 20ms Maximum DC input -24V 3.3V 20ms Maximum DC input -24V 12V 20ms Maximum Ripple & Noise: 3.3V:50mV 5V:50mV p-p 12V1:120mV p-p -12V:120mV p-p 5Vsb:50mV p-p Over Current Protection: +5V-----13.2~18A +12V---17.6~24A +3.3V--13.2~18A Short Circuit Protection: load < 0.1 Ohm ENVIRONMENTAL SPECIFICATION TEMP.Range: Storage Temperature: - 20°C to + 80 MTBF: The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25 maximum-output load, and nominal AC inout voltage *Output Voltage and Current Rating +3.3V +5V +12V1 -12V +5Vsb Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 50mV Regulation Load % ±5% ±5% ±5% ±10% ±5% Output Max.(A) 12A 12A 15.4A 0.5A Output Min.(A) 0.5A NOTES 5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off. The +3.3V and +5V total output shall not exceed 80 watts. The total output shall not exceed 200 watts MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for more detail. FSP reserve the right to change the content without prior notice IPC PSU FSP200-62DL(24V)