FSP085-DACM1 FSP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCRIPTION
This series of AC/DC switching power supplies are for 85 watts of continuous output power. They are enclosed in a 94V-0 rated polyphenylene-oxide case with an IEC320/C8 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 and FCC class B emission limits, and are designed for medical applications, not for life- supporting equipment.
FEATURES
Low safety ground leakage current Wide input range 90-264 VAC 100% burn-in Overvoltage protection Short-circuit protection Overpower protection Compliant with CEC and Energy Star Efficiency level V requirements *No load power consumption less than 0.5 W *Average active efficiency 87% Compliant with RoHS requirements Compliant with IPX1 WATTAGE Wattage: 85W DIMENSION Dimension: 134.0mm(L) x 58.0mm(W) x 32.0mm(H) INPUT SPECIFICATION Input Range: 90-264 Vdc Input Frequency: 47-63 Hz Input Current: 1.70A(rms) for 115VAC, 0.90A(rms) for 230VAC Leakage Current: 100 µA max. @ 264 VAC,63 Hz SAFETY STANDARD APPAOVAL OUTPUT SPECIFICATION Ripple & Noise: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Over Current Protection: Protected to short circuit conditions ENVIRONMENTAL SPECIFICATION TEMP.Range: Operating Temperature:0°C to +60°C Storage Temperature: -40°C to + Humidity: Operating : 5% to 95% RH, Non- condensing OUTPUT ELECTRICAL Single Output: 24 V/ 3.54 A NOTES 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20MHz bandwidth, at rated line voltage and output load ranges, and with a 10 uF tantalum capacitor in parallel with a 0.1uF ceramic capacitor across the output. MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for more detail. FSP reserve the right to change the content without prior notice Medical PSU FSP085-DACM1