FSP065-P24-A FSP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

FEATURES

hDesign to meet IEC 60950-1 and IEC 62368-1 safety standard hCompact dimension 2”x4”x1.047” hInput power less than 0.5w at 0.2w load condition hEN 55032 Class B radiated emission hSurge protection ±2 KV diff, ±4 KV com hHigh altitude 5000 meters operation

DESCRIPTION

This AC-DC switching power supply in a package of 2 x 4 inches is a Class-II safety construction and features 0.5W low input power consumption at 0.2W load which complies with Energy Star requirements. This PSU is capable of delivering 65 watts of continuous power at convection cooling and 50Ċ operation temperature. The product is suitable for information, audio & video, and networking application. INPUT SPECIFICATIONS Input voltage: Input frequency: Input current: No load power consumption Touch current: 90-264 VAC 47-63 Hz

1.7 A (rms) for 115 VAC

0.8 A (rms) for 230 VAC

Ù0.21A 250 uA max. @ 264 VAC, 63 Hz GENERAL SPECIFICATIONS Efficiency: Power turn on time Hold-up time: Line regulation: Inrush current: Operating altitude: Withstand voltage: Isolation Resistance: MTBF: EMC Performance EN55032 FCC: VCCI: EN61000-3-2: EN61000-3-3: EN61000-4-2: EN61000-4-3: EN61000-4-4: EN61000-4-5: EN61000-4-6: EN61000-4-8: EN61000-4-11: See rating chart. 1.0 Sec maxi. 10 mS minimum @ 100% load & 115 VAC ±0.5% maximum at full load 55A @ 115VAC @ 25℃ cold start 100A @ 230 VAC @ 25℃ cold start 5000 meters above sea level

3000 VAC from input to output,

Input to output 100M ohm @ 500Vdc, 25℃ 400,000 hours minimum at full load at 25℃ ambient, calculated per BELL CORE SR-332 Class B conducted, class B radiated Class B conducted, class B radiated Class B conducted, class B radiated Harmonic distortion, class A Line flicker ESD, ±8 KV air and ±4 KV contact Radiated immunity, 3 V/m Fast transient/burst, ±1 KV Surge, ±2 KV diff, ±4 KV com Conducted immunity, 3 Vrms Magnetic field immunity, 1 A/m Voltage dips immunity, >95% reduction for 10 ms, criteria B 30% reduction for 500 ms, criteria C >95% reduction for 5000 mS, criteria C OUTPUT SPECIFICATIONS Output voltage/current: Total output power: Ripple and noise: Protection: Over voltage: Short circuit &Over current: Over temperature: Brown out: Temperature coefficient: Transient response: ENVIRONMENTAL SPECIFICATIONS Operating temperature: Storage temperature: Operating humidity: Derating: See rating chart. 65W ±1%. Set at 110~130% of nominal output voltage, auto recovery Output protected to short circuit condition, auto recovery Detected by thermistor, auto recovery Set at 70VAC All outputs ±0.04% /℃ maximum Maximum excursion of 5% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change -20℃~+70℃ -40℃~+85℃ 5% to 95% non-condensing Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection cooling condition SAFETY STANDARD APPROVAL 1 www.fsp-group.com.tw TECHNICAL DATASHEET 65W ITE POWER SUPPLY FSP065-P24 A Series © 2022 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2022.05 spec 188688C US

2 www.fsp-group.com.tw TECHNICAL DATASHEET 65W ITE POWER SUPPLY FSP065-P24 A Series © 2022 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2022.05 spec OUTPUT VOLTAGE/CURRENT RATING CHART 12 V 19 V 24 V 54 V Output Voltage 0 A 0 A 0 A 0 A Min. Load 5.40 A 3.42 A 2.70 A 1.20 A Max. Current ±3% ±3% ±3% ±3% Tolerance 120 mV 190 mV 240 mV 300 mV Ripple & Noise 65W 65W 65W 65W Max. Power 88 / 89% 89 / 90% 90 / 90% 91 / 92% Efficiency 115 / 230 Vac NOTES: 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. Model FSP065-P24-A12 FSP065-P24-A19 FSP065-P24-A24 FSP065-P24-A54 OUTPUT POWER DERATING CURVE 100-10-20 706050403020 100 % Max Load Temperture (℃) INPUT VOLTAGE DERATING CURVE 264240115 100 % Output Power Input Voltage (Vac)

3 www.fsp-group.com.tw MECHANICAL SPECIFICATIONS TECHNICAL DATASHEET 65W ITE POWER SUPPLY FSP065-P24 A Series © 2022 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners. 2022.05 spec Pin No. Function Neutral NC Line Pin assignment: 1. IN1: JST B2P3-VH or EQU 3. Dimension (L*W*H): 101.6 * 50.8 * 26.6 mm 4. Weight: 125 grams. (0.275 lbs.) approx. Pin No. 1, 2 3, 4 Function RETURN. 2. CN200: JST B4P-VH or EQU