FS1000 AEROFLEX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SIGNAL & CONTROL SOLUTIONS Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: ascs-sales@aeroflex.com Revision Date: 8/21/2013 FS1000 Series Fast Switching Synthesizer Supports hundreds of fast switching, high spectral purity applications. Features:

  • <100 Microsecond switching
  • Low phase noise -130 dBc/Hz
  • 2 Hz resolution
  • Low spurious
  • Dual configuration available Description: The Aeroflex FastSource 1000 RF source represents a milestone in Synthesizer development and reflects years of design experience in Fast Switching Synthesis. Designed specifically to meet the needs of todays Telecommunications industry, this high speed source offers a cost effective solution without sacrificing performance. The source covers a frequency range of 4.5 MHz to 6.0 GHz with a switching speed of 100 Microseconds. Spurious levels are greater than -65 dBc and Phase noise at 1.0 GHz is greater than -130 dBc/Hz at 10 KHz offset. Specifications: Frequency Range: 4.5 MHz to 6010 MHz Step Size: 2 Hz - 2000 MHz

2 Hz - 2000 to 4000 MHz

4 Hz - 4000 to 6010 MHz

Power Output: +7 dBm Flatness: ±1.5 dB Output Isolation: 25 dB minimum between ports <5 microseconds switching time between ports VSWR: 1.8:1 External Reference: 10 MHz, 3 dBm ±4 dB, 50 W Frequency Stability: Same as Reference Oscillator Reference Output:

10 MHz, +3 dBm ±2 dB, 50 W

Phase Noise of External Reference: dBc/Hz Offset -130 100 Hz -140 1 KHz -143 10 KHz -145 50 KHz Switching Time: <100 µ seconds to within 1.0 radian of final phase Noise Floor:

10 MHz OFFSET Frequency Range

-140 dBc/Hz 4.5 to 180 MHz -145 dBz/Hz 180 to 1000 MHz -147 dBc/Hz 1000 to 2000 MHz -138 dBc/Hz 2000 to 4000 MHz -134 dBc/Hz 4000 to 6010

SIGNAL & CONTROL SOLUTIONS Aeroflex Signal & Control Solutions www.aeroflex.com/ASCS • acc-sales@aeroflex.com Revision Date: 8/21/2013 Specifications (con’t): Output Phase Noise: OFFSET <250 MHz .25 to <.5 GHz 0.5 to <1.0 GHz 1.0 to <2.0 GHz 2.0 to <4.0 GHz 4.0 to <6.0 GHz 10 kHz -125 -122 -135 -132 -131 -127 -125 -122 -119 -116 -113 -110 20 kHz -127 -124 -137 -133 -133 -129 -127 -124 -121 -118 -115 -112 100 kHz -128 -125 -138 -134 -134 -130 -128 -123 -122 -118 -116 -113 Harmonics -25 dBc max. 4.5 to 6010 MHz Sub Harmonics: -60 dBc, Typical -50 dBc Max except for components at FC noted below @ FC=4.0 to 4.25, 5F/2 may be -45 dBc @ Offsets ≤±2.8 MHz from the carrier, spurs will be as follows: FC <180 MHz: -60 dBc 180 MHz<FC<1.0 GHz -66 dBc 1.0 GHz<FC<2.0 GHz -60 dBc 2.0 GHz<FC<4.0 GHz -54 dBc 4.0 GHz<FC<6.01 GHz -48 dBc For 1.0 GHz<FC <2 GHz, fixed spurs at the following frequencies may be -60 dBc: 1175, 1225, 1275, 1325, 1375, 1425, 1475, 1525, 1575 and 1625 MHz Spurious: dBc (maximum) Frequency Range -65 4 to 2000 MHz -60 2000 to 4000 MHz -55 4000 to 6010MHz For FC less than 180 MHz a spur may exist between 1609 Mz and

1960 MHz at -35 dBc: A fixed 800 MHz spur may exist at -60 dBc

Residual FM: Residual FM Frequency Range < 7 4 to 2000 MHz <16 2000 to 4000 MHz < 32 4000 to 6010MHz Frequency Control: Parallel BCD positive or negative true with strobe. Strobe normally low, trigger on trailing edge Output Fault: TTL level logic, “1” normal operation Remote On/Off (RF): O MHz = Off On/Off Ratio <25 dBc Logic Connector: 50 Pin receptacle, AMP 554216-3 Initialization: Unit will initialize with RF Off Random Vibration: 10 Hz to 300 Hz @ 1.2 G RMS Power: 105 to 125 VAC, 50-60 Hz Temperature Range: +10o to +45 oC CONFIGURATION S = Single Synthesizer D = Dual, Two independent synthesizers in a common chassis FS1000 Series Fast Switching Synthesizer Physical Dimensions: Dimensions: 16.75” W X 5.22” H X 23.86” D

SIGNAL & CONTROL SOLUTIONS Aeroflex Signal & Control Solutions www.aeroflex.com/ASCS • ascs-sales@aeroflex.com Revision Date: 8/21/2013 FS1000 Series Fast Switching Synthesizer Programming Input (BCD Connector) SIGNAL PIN SIGNAL PIN Logic Ground 50 NC 25

400 MHz 49 Strobe 24

200 MHz 44 4 MHz 19

100 MHz 43 2 MHz 18

80 MHz 41 20 MHz 16

40 MHz 40 10 MHz 15

800 MHz 38 1 GHz 13

8 Hz 37 2 Hz 12

4 Hz 36 4 GHz 11

80 Hz 35 20 Hz 10

40 Hz 34 10 Hz 9

800 Hz 33 200 Hz 8

400 Hz 32 100 Hz 7

Note: Mating Connector is 3M P/N 3564-1001 (50 Pin Ribbon. Bail mount, Plug)

SIGNAL & CONTROL SOLUTIONS Aeroflex Control Componen. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions

40 Industrial Way East 35 South Service Rd

Eatontown , NJ 07724 [USA] Plainview, NY 1 1803 [USA} Fax: (732) 460-0214 Fax: (5 16) 694-4823 Sales Phone: (732) 460-0212 ASCS-sales@aeroflex.com ISO 9001:2008 certified Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. Revision Date: 8/21/2012 FS1000 Series Fast Switching Synthesizer