FRS20

FRS1 ALLEN-BRADLEY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

• Non contact actuation
• High tolerance to misalignment
• High switching current (up to 2A AC, 1A DC)
• Plastic rectangular housing (IP67)
• Cable or Quick Disconnect (QD) connections Specifications Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE marked for all applicable directives and cULus Reed Contacts Safety Auxiliary Operating Distance – Make 12mm (0.47in) 15mm (0.59in) Operating Distance – Break 23mm (0.91in) 26mm (1.02in) Closing Time 3.0ms 0.5ms Dropout Time 2.1ms 0.3ms Bounce Time 0.7ms 0.7ms Initial Contact Resistance 15m Ω 10mΩ Initial Capacitance, T erminal to T erminal 0.65pF 0.2pF Initial Insulation Resistance, Te r m i n a l t o Te r m i n a l1 x 10 6Ω 1 x 106Ω Safety Contact Switching Capability AC DC 250VAC 2A max 24VDC 1A max Safety Contact External Fusing AC DC <1.6A quick blow <0.8A quick blow Auxiliary Contact Switching Capability 300VDC, 250VAC, 0.5A including inrush 15VA/10W suitable for AC/DC circuits Min Initial Breakdown Voltage 600VAC 600VAC Operating T emperature -10°C to +65°C (14° to 149°F) Enclosure Protection IP67 (NEMA6P) Cable FRS 1 0.75mm2 (18 AWG) 2 wire Jacket OD 5.6mm (0.22in) FRS 2 0.50mm2 (20 AWG) 4 wire Jacket OD 6.5mm (0.26in) FRS 20 0.50mm2 (20 AWG) 4 wire Jacket OD 6.5mm (0.26in) FRS 21 0.50mm2 (20 AWG) 6 wire Jacket OD 7.5mm (0.3in) Quick Disconnects M12 x 1, 4 pin or 6 pin Case Material Red moulded ABS Plastic Mounting Any position M4 mounting security screws included Weight (not including cable) FRS 1 FRS 2 FRS 20 FRS 21 Sensor Actuator 35g (0.08lbs) 85g (0.19lbs) 40g (0.09lbs) 85g (0.19lbs) 43g (0.09lbs) 85g (0.19lbs) 43g (0.09lbs) 85g (0.19lbs) Electrical Life 1 x 10 6 at the rated load Mechanical Life 10 x 106 Vibration 7g, 10 to 200Hz Shock 50g

Ferrogard 1, 2, 20 & 21 Product Selection Note: Contacts are described with the guard door closed, that is, actuator in place. Switch is shipped complete with actuator. Accessories Safety Contact Switching Capability Safety Contacts Auxiliary Contacts Connection Housing Material T ype Catalogue Number 250V AC 2A 1 N.C. None 2m Cable ABS Plastic FRS 1 440N-G02001 4m Cable 440N-G02004 6m Cable 440N-G02022 8m Cable 440N-G02041 10m Cable 440N-G02015 1 N.O. 2m Cable FRS 2 440N-G02002 4m Cable 440N-G02014 6m Cable 440N-G02038 8m Cable 440N-G02033 10m Cable 440N-G02019 15m Cable 440N-G02043 20m Cable 440N-G02040

4 Pin Micro QD 440N-G02093

2 N.C. None 4m Cable FRS 20 440N-G02085

4 Pin Micro QD 440N-G02097

1 N.O. 2m Cable FRS 21 440N-G02055 4m Cable 440N-G02061 6m Cable 440N-G02060 10m Cable 440N-G02059

6 Pin Micro QD 440N-G02098

1 N.C. 1 N.O. 2m Cable FRS 2 440N-G02092

4 Pin Micro QD 440N-G02094

2 N.C. None 4 Pin Micro QD FRS 20 440N-G02090 1 N.O. 2m Cable FRS 21 440N-G02058 4m Cable 440N-G02077 6m Cable 440N-G02083

6 Pin Micro QD 440N-G02099

Mating cable, 4-pin straight 2m. See page 15-10 for details and additional lengths. 889D-F4AC-2 Mating cable, 4-pin straight 5m. See page 15-10 for details and additional lengths. 889D-F4AC-5 Mating cable, 4-pin straight 10m. See page 15-10 for details and additional lengths. 889D-F4AC-10 Mating cable, 6-pin straight 2m. See page 15-11 for details and additional lengths. 889R-F6ACA-2 Mating cable, 6-pin straight 5m. See page 15-11 for details and additional lengths. 889R-F6ACA-5 Mating cable, 6-pin straight 10m. See page 15-11 for details and additional lengths. 889R-F6ACA-10 Description Page Number Catalogue Number Replacement Actuator — 440N-A02005

Ferrogard 1, 2, 20 & 21 Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Typical Wiring Diagrams Switch, Cable Version Actuator Switch, QD Version 15-19 (0.59-0.75) (0.16) 5 (0.2) 60 (2.36) 76 (2.99) 19.5 (0.77) 15 (0.59) (0.2) (0.08) 8 (0.31) 30 (1.18) 30 (1.18) 15 (0.59) 19.5 (0.77) 8 (0.31) 4 (0.16) (0.28) (0.08) (0.2)5 (0.2) 60 (2.36) 76 (2.99) (0.16) 60 (2.36) 76 (2.99) 8 (0.31) 30 (1.18) 5 (0.2) (0.51) 19.5 (0.77) (0.08) (0.20) (0.59) FRS 1 Brown Blue Safety N.C. Fuse Externally FRS 20 Cable QD Brown Blue Black White Safety N.C. Fuse Externally Safety N.C. Fuse Externally Safety N.C. Fuse Externally Safety N.C. Fuse Externally FRS 2 Cable QD Brown Blue Black White Safety N.C. Fuse Externally Aux. N.O. Safety N.C. Fuse Externally Aux. N.O. FRS 21 Cable QD Red & Blue Red Red & Black Red & White Red & Y ellow Green Safety N.C. Fuse Externally Safety N.C. Fuse Externally Aux N.O. Safety N.C. Fuse Externally Safety N.C. Fuse Externally Aux N.O. Cable

Ferrogard 1, 2, 20 & 21 Application Details Encapsulated in the Ferrogard is a unique high power industrial reed, capable of switching up to 15A. The need switch is de-rated by a non resettable overload protection fuse. On presenting the actuator to the switch, the high intensity magnetic field from the actuator causes the contacts to close. On removing the actuator (opening the door), the safety contacts open. Operating Principle When the actuator is aligned with the switch, the sensing distance is 10mm (0.39.) As the amount of misalignment increases, the sensing distance decreases. Beyond 4mm (0.16), the switch will not actuate in the presence of the actuator. 10 (0.39) Misalignment tolerance on nonferrous materials 4 (0.16) 4 (0.16) T ypical Operating Curve