DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

All specifications are subject to change without notice. FRBST1061 R ev B 0 7/12/12 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www .pericom.com 3.3V CMOS 61.44MHz Base Station VCXO FRBST1061 Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm ASSP VCXO Package: Pin Functions: Pin Function

1 Control Voltage

2 Enable/Disable

3 Ground

4 Output

5 N/C

Recommended Land Pattern: Part Ordering Information: FRBST1061 *Extended high frequency power decoupling is recommended (see test circuit for minimum recommendation). To ensure optimal performance, do not route RF traces beneath the package. CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. 7.0 x 5.0mm Ceramic SMD ASSP VCXO™ for Base Station Product Features

  • Very low Pk to Pk jitter - 40ps Max
  • Low supply current - 10mA Max
  • Low power standby mode
  • RoHS Compliant Product Description This is an enhanced 3.3V , 61.44MHz with superb jitter and low operating current for providing clock references in base station applications.

Applications

  • Base Station (Scale: none, Dimensions are in mm) 12-0050

All specifications are subject to change without notice. FRBST1061 R ev B 0 7/12/12 SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www .pericom.com 3.3V CMOS 61.44MHz Base Station VCXO Application Specific Voltage Controlled Crystal Oscillator 7.0 x 5.0mm FRBST1061 ASSP VCXO Electrical Performance Parameter Min. Typ. Max. Units Notes Output Frequency 61.440 MHz Supply Voltage VDD 3.135 3.3 3.465 V Supply Current, Output Enabled 10 mA Supply Current, Output Disabled 3 mA Frequency Stability ±50 ppm See Note 1 below Operating Temperature Range -40 +85 °C Output Logic 0, VOL 10% VDD V Output Logic 1, VOH 90% VDD V Output Load 15 pF Duty Cycle 45 55 % Measured 50% VDD Rise and Fall Time 4 ns Measured 20/80% of waveform Jitter, Phase, RMS(1- s) 1 ps 12kHz~20MHz Frequency Band Jitter, Peak to Peak (Pk-Pk) 40 ps 100.000 Random Periods Phase Noise -55 dBc/Hz At 10Hz offset Phase Noise -90 dBc/Hz At 100Hz offset Phase Noise -122 dBc/Hz At 1kHz offset Phase Noise -134 dBc/Hz At 10kHz offset Phase Noise -150 dBc/Hz At 100kHz offset Phase Noise -155 dBc/Hz At 1MHz offset Notes: Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (10 years at +40°C average ef fective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Voltage Control Function Parameter Min. Typ. Max. Units Notes Absolute Pull Range (APR) ±50 ppm See 1 below Control Voltage Range 0.3 3.0 V As rated Center Control Voltage 1.65 V For RMT Nominal Frequency Monotonic Linearity 10 % Positive Transfer Slope Input Impedance 5000 kΩ Control Voltage Pin Notes: APR is relative to the nominal output frequency; APR is inclusive of frequency deviation due to stability. Output Enable / Disable Function Parameter Min. Typ. Max. Units Notes Input Voltage (pin 2), Output Enable 3.0 V or open Input Voltage (pin 2), Output Disable (low power standby) 0.3 V Output is Hi-Z Internal Pullup Resistance 20 kΩ Output Disable Delay 100 ns Output Enable Delay 100 ns Absolute Maximum Ratings Parameter Min. Typ. Max. Units Notes Storage Temperature -55 +125 °C For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/assp-xo/?part=FRBST1061 For test circuit go to : http://www.pericom.com/pdf/sre/tc_vc6cmos.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf 12-0050