FPLA521 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. PRODUCT DA T A SHEET Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS The Connor-Winfield FPLA521 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm overall stability. Operating at 3.3V supply voltage, the FPLA521 provides LVPECL complementary outputs. 1 2 FPLA521 - 155.52MHz CLOCK SERIES CENTER FREQUENCY
FEATURES
DESCRIPTION
ORDERING INFORMATION
3.3V OPERATION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE ±50ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING NOTES: 1. Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging. 2. Output must be terminated into 50 ohms to Vcc - 2V Thevenin equivalent. 3. Duty Cycle measured at 1.977V. SURFACE MOUNT 3.3V LVPECL CLOCK FPLA521 Ec162 01 03/01/05 www.conwin.com CW 0107 FPLA521 155.52M CW 0107 FPLA521 155.52M ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -40 - 85 °C Supply Voltage (Vcc) -0.5 - 7.0 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 44.736 - 500 MHz Total Frequency Tolerance -50 50 ppm 1 Operating Temperature Range 0 - 70 °C Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) - - 80 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS LVPECL OUTPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - - 50 Ohms 2 Voltage (High) (Voh) 2.275 - - Vdc (Low) (Vol) - - 1.68 Vdc Duty Cycle 45 50 55 % 3 Rise / Fall Time 20% to 80% - - 1 nS PACKAGE CHARACTERISTICS TABLE 4.0 grounded metal cover. PROCESS RECOMMENDATIONS TABLE 5.0 Solder Reflow The component solder used internal to this device has a melting point of 221°C. The peak temperature inside the device should be less than or equal to 220°C for a maximum of 10 seconds. Wash Ultrasonic cleaning is mot recommended.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. PRODUCT DA T A SHEET Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2001 Connor-Winfield all rights reserved.a CRYSTAL CONTROLLED OSCILLATORS 2 2Ec162 01 03/01/05 www.conwin.com SUGGESTED PAD LAYOUT PIN CONNECTION N/C N/C N/C GROUND N/C Q OUTPUT Q OUTPUT N/C Vcc N/C CW FPLA521 155.52M CW FPLA521 155.52M DATE CODEDATE CODE OUTPUT WAVEFORM “1” LEVEL “0” LEVEL