FPHA514 CONNOR-WINFIELD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2007 Connor-Winfield all rights reserved.aEC258 09/26/07 CRYSTAL CONTROLLED OSCILLATORS The Connor-Winfield FPHA514 is a fixed frequency surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and tight frequency stability. Operating at 5.0V supply voltage, the FPHA514 provides PECL Differential Outputs with an enable/disable function. 1 2 FPHA514 - 155.52M PECL SERIES CENTER FREQUENCY

FEATURES

DESCRIPTION

ORDERING INFORMATION

5.0V OPERATION LOW JITTER <1ps RMS OVERALL FREQUENCY TOLERANCE: ±25ppm TEMPERATURE RANGE: 0 to 70°C PECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE 5.0V SURFACE MOUNT PECL CLOCK FPHA514 CW 0738 FPHA514 155.52MHZ ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 7.0 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Center Frequency (Fo) 44.736 - 200 MHz Total Frequency Tolerance -25 25 ppm 1 Operating Temperature Range 0 - 70 °C Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc Supply Current (Icc) - - 70 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS SSB Phase Noise at 10Hz offset - -60 - dBc/Hz SSB Phase Noise at 100Hz offset - -90 - dBc/Hz SSB Phase Noise at 1KHz offset - -100 - dBc/Hz SSB Phase Noise at 10KHz offset - -125 - dBc/Hz SSB Phase Noise at 10KHz offset - -135 - dBc/Hz INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Disable Input Voltage (High) (Vih) 3.96 - - Vdc 2 Enable Input Voltage (Low) (Vil) - - 3.40 Vdc 2 PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD - - 50 Ohms 3 Voltage (High) (Voh) 3.96 - - Vdc (Low) (Vol) - - 3.40 Vdc Duty Cycle 45 50 55 % 4 Rise / Fall Time 20% to 80% - - 1 nS PROCESS RECOMMENDATIONS TABLE 6.0 Soldering Process See solder profile page 2. Wash Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging. 2) Output is enabled with no connection on pin 2. When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 3.67V PACKAGE CHARACTERISTICS TABLE 5.0 cover.

THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE:PAGE OF Copyright 2007 Connor-Winfield all rights reserved.aEC258 09/26/07 CRYSTAL CONTROLLED OSCILLATORS 2 2 00 ENABLE/ DISABLE Pin Connection

1 N/C

2 Enable / Disable

3 N/C

4 Ground

5 N/C

6 Q Output

7 Q Output

8 N/C

9 Vcc

10 N/C

155.52MHZ CW FPHA514 155.52MHZ DATE CODEDATE CODE Dimensional Tolerance: ±.005 (.127mm) 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Q Q 50% 20% 80% tr Duty Cycle 45 / 55 45 / 55 tf Package Layout Output Waveform Pin Connections Test Circuit Solder Profile Suggested Pad Layout Vcc = Vcc2 = 5.0 Vdc