FPC06073 JOHANSONMANUFACTURING | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
4 to 8GHz 10dB Directional Coupler FPC06073 www.knowlescapacitors.com
2777 Route 20 East, Cazenovia, NY 13035| Phone: (315)655-8710
To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com June 2024
DESCRIPTION
DLI brand surface mount directional couplers utilize DLI’s high dielectric ceramic materials with precision engineering deliver small size and minimal performance variation over temperature. The components are well matched for monitoring incident and reflected power
FEATURES
- Small Size
- Solder Surface Mount Package
- Moisture Sensitivity Level: MSL1
- Frequency Stable over Temperature
- Operating & Storage Temp: -55˚C to +125˚C
- Characteristic Impedance: 50Ω Packaging and Ordering Information: To request Tape and Reel packaging, please order part number FPC06073-T, see additional data on page 5. SPECIFICATIONS* Parameter Frequency (GHz) Min Max Passband Insertion Loss* Excess (dB) 0.2 Passband Return Loss (dB) 18 Coupling (dB) 10 11.5 Directivity (dB) 20 Size (L x W x H) 0.170 x 0.080 x 0.015 in 4.318 x 2.032 x 0.381mm 4 - 8 CW Input Power** (W) 25 *Electrical specifications based on typical mounted performance at room temperature. Insertion loss shall vary ±0.5dB over temperature. ** Power rating assumes the component will be mounted to a PCB with good thermally conducting ground vias as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 125°C base temperature. Information in this document is for informational and guideline purposes only. All information regarding the Product described in this datasheet is subject to change from time to time at Knowles Precision Devices ’ sole discretion. It is the customer’s sole responsibility to evaluate the suitability of the Product in the customer ’s particular application. Knowles Precision Devices assumes no responsibility or liability for the use of the information contained within.
4 to 8GHz 10dB Directional Coupler FPC06073 www.knowlescapacitors.com To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com June 2024 *Typical de-embedded measured performance mounted on a connectorized test fixture. DEB is 0.010in RO4350B with 50.0Ohm CPW ground traces going into the ports at room temperature. Typical Measured Performance*
4 to 8GHz 10dB Directional Coupler FPC06073 www.knowlescapacitors.com To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com June 2024 Physical Dimensions Top Bottom Side Units = Inches Port 1 Port 2 Port 3 Port 4 Configuration 1 Input Thru Coupled Isolated Configuration 2 Thru Input Isolated Coupled Configuration 3 Coupled Isolated Input Thru Configuration 4 Isolated Coupled Thru Input FPC06073 Coupler Port Configuration Tolerances: For values with 3 decimal places ±0.001 For values with 4 decimal places ±0.0005 Notes : 1. Termination Finish: ENIG: 3 - 6 μinch Au over 50 μinch Ni 2. Maximum Assembly Process Temperature: 250°C 3 1
4 to 8GHz 10dB Directional Coupler FPC06073 www.knowlescapacitors.com To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com June 2024 Recommended PCB Layout Note:
- 50Ω trace dimensions are application specific.
- Ensure adequate grounding beneath the part.
- Trace feed locations can be horizontal, vertical or angled. For further details and best practices, reference the Microwave Products Guide, available at: https://www.knowlescapacitors.com/Support/Catalogs
4 to 8GHz 10dB Directional Coupler FPC06073 www.knowlescapacitors.com To Order Contact KCCSales@knowles.com | For Technical Inquiries Contact DLIengineering@knowles.com June 2024