EMW2 ROHM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
EMW2 / EMX2 / EMX3 / UMW2N /UMX2N / Transistors UMX3N / FMW2 / IMX2 / IMX3 General purpose (dual transistors) EMW2 / EMX2 / EMX3 / UMW2N / UMX2N / UMX3N / FMW2 / IMX2 / IMX3 zFeatures 1) Two 2SC2412AK chips in a EMT or UMT or SMT package. zEquivalent circuit (1)(2)(3) (4) (5) (5)(4)(3) (2) (1) (1)(2)(3) (4)(5) (6) (6)(5)(4) (3)(2) (1) (1)(2)(3) (4) (5) (6) (6)(5)(4) (3) (2) (1) EMW2 / UMW2N FMW2 EMX2 / UMX2N IMX2 EMX3 / UMX3N IMX3 zAbsolute maximum ratings (Ta = 25°C) Parameter Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 150 300(TOTAL) 150(TOTAL)EMW2 / EMX2 / EMX3 / UMW2N / UMX2N / UMX3N FMW2 / IMX2 / IMX3 150 −55~+150 Unit V V V mA mW Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. zElectrical characteristics (T a = 25°C) Parameter Symbol Min. Typ. Max. Unit Conditions Transition frequency BV CBO BV CEO BV EBO ICBO IEBO VCE(sat) hFE fT 120 180 0.1 0.1 0.4 560 V V V µA µA V MHz ∗ Cob − 2 3.5 pF IC =50µA IC =1mA IE=50µA VCB =60V VEB =7V VCE =12V, IE=−2mA, f=100MHz VCB =12V, IE=0mA, f=1kHz IC /IB=50mA/5mA VCE =6V, IC =1mA ∗Transition frequency of the device. Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Output capacitance zPackage, marking, and packaging specifications Type EMX2 EMT6 T2R 8000 EMW2 EMT5 T2R 8000 EMX3 EMT6 T2R 8000 UMX2N UMT6 TR 3000 UMX3N UMT6 TR 3000 FMW2 SMT5 T148 3000 IMX2 SMT6 T108 3000 IMX3 SMT6 T108 3000 UMW2N UMT5 TR 3000 Package Marking Code Basic ordering unit (pieces)
EMW2 / EMX2 / EMX3 / UMW2N /UMX2N / Transistors UMX3N / FMW2 / IMX2 / IMX3 zExternal dimensions (Units : mm) Each lead has same dimensionsROHM : EMT5 EMW2 UMW2N Each lead has same dimensions 0.9 0.15 0to0.1 0.1Min. 0.7 2.1 1.3 0.65 2.0 (4) (1) (5) 0.2 1.25 (2) 0.65 (3) ROHM : UMT5 EIAJ : SC-88A FMW2 Each lead has same dimensions 0to0.1 1.1 0.8 0.3to0.6 0.15 1.6 2.8 2.9 0.95 1.9 (4)(5) (1) 0.3 (3) 0.95 (2) ROHM : SMT5 EIAJ : SC-74A 2.0 1.30.9 0.7 0.65 0.65 UMX2N / UMX3N Each lead has same dimensionsROHM : UMT6 EIAJ : SC-88 0to0.1 (6) 0.15 0.1Min. 2.1 0.2 1.25 (1) (4) (3) (2) (5) IMX2 / IMX3 Each lead has same dimensionsROHM : SMT6 EIAJ : SC-74 (6)(5)(4) 0.3to0.6 0.15 0.3 1.1 0.8 0to0.1 (3) 2.8 1.6 1.9 2.9 0.95 (2) 0.95 (1) Each lead has same dimensionsROHM : EMT6 EMX2 / EMX3 0.22 1.2 1.6 (1) (2) (3) (5) (4) 0.13 0.5 0.50.5 1.0 1.6 0.22 1.2 1.6 (1) (2)(5) (3) (6) (4) 0.13 0.5 0.50.5 1.0 1.6
Appendix1-Rev1.0 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.