FMK ISABELLENHUETTE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

Applications

Preliminary technical data Resistance values mOhm 1.5 / 2 / 3 / 4 / 5 / 6 Tolerance % 1 / 5 Temperature coefficient (20-60 °C) ppm/K < 50 Applicable temperature range °C -65 to +170 Power rating W up to 4 Dielectric withstanding voltage V AC/DC 200 Inductance nH < 3 Stability (at rated power) deviation after 2000h, TK = Terminal temperature < 0.5 % (TK=80 °C) RoHS Abbrevation type M=MANGANIN ®, V=NOVENTIN®, Z=ZERANIN®30 * values in preparation Type Value [mΩ] Rthi [K/W] TCR [ppm/K] P70°C [W] P110°C [W] FMK-Z-R0015* 1.5 20 <50 4 3 FMK-M-R002* 2 25 <50 3.5 2 FMK-M-R003* 3 24 <50 2.5 1.5 FMK-V-R004* 4 50 <50 2 1 FMK-V-R005 5 60 <50 1.5 1 FMK-V-R006 6 65 <50 1.5 1 Ordering code FMK - M - R002 - 1.0 Tolerance Resistance value [Ohm] / „R“ represents decimal point Material (MANGANIN ®) Type

ISA-PLAN® // PRECISION RESISTORS FMK // Size 1206 Tape and reel information Specification DIN EN 60286-3 Tape width mm 8 Reel size inch 13 Parts per reel pcs 12500 Packaging weight net g 454 Recommended solder profile Reflow- and IR-soldering Temperature °C 260 255 217 Time sec peak 40 90 Mechanical dimensions and pcb-layout proposal (Reflow-soldering) [mm] / Drawing Z-YL-258

ISA-PLAN® // PRECISION RESISTORS FMK // Size 1206 Temperature dependence of the electrical resistance of MANGANIN® resistors dR/R20 [%] 08.03.2019,me -1,0 -0,5 0,0 0,5 1,0 -70 -40 -10 20 50 80 110 140 170 TCR = 0 ppm/K TCR = -50 ppm/K TCR = +50 ppm/K Temperature dependence of the electrical resistance of ZERANIN® resistors 08.03.2019,me -1,0 -0,5 0,0 0,5 1,0 -70 -40 -10 20 50 80 110 140 170 TCR = 0 ppm/K TCR = -50 ppm/K TCR = +50 ppm/K Temperature [°C] Temperature [°C] Temperature dependence of the electrical resistance of NOVENTIN® resistors dR/R20 [%] 08.03.2019,me -1,0 -0,5 0,0 0,5 1,0 -70 -40 -10 20 50 80 110 140 170 TCR = 0 ppm/K TCR = -50 ppm/K TCR = +50 ppm/K dR/R20 [%] Temperature [°C] Power derating curve Stability < 1.0 % Improved stability < 0.5 % P/PNom 0,25 0,5 0,75 1,25 0 20 40 60 80 100 120 140 160 180 Terminal temperature TK [°C]

ISA-PLAN® // PRECISION RESISTORS FMK // Size 1206 0,0001 0,001 0,01 0,1 100 0,01 0,1 100 1000 10000 0,0001 0,001 0,01 0,1 1 10 100 Power [W] Pulse energy [J] Pulse width [s] FMK-Z-R0015; FMK-M-R003; FMK-V-R006 Maximum pulse energy / power continuous operation 100010000 Maximum pulse energy respectively pulse power for permanent operation Specification Parameters Test conditions Specified values Temperature Cycling 2000 cycles (-55 °C to +150 °C) ±0.5% Low Temperature Storage -65 °C for 250 h ±0.1% Moisture Resistance MIL-STD-202 method 106 ±0.5% Mechanical Shock 100 g, 6 ms half sine ±0.2% Vibration, High Frequency 10 g, 10-2000 Hz, 24 h each axis ±0.2% Operational Life 2000 h, TK max at rated power ±1.0%, TK=110°C High Temperature Exposure 2000 h / 170 °C ±1.0% Bias Humidity +85 °C, 85 r.F., 1000 h, powered ±0.5% Pulse energy [J] Pulse width [sec] Power [W] Disclaimer // All products, product specifications and data are subject to change without notice. The product specifications do not expand or otherwise modify Isabellenhütte’s terms and conditions of sale, including but not limited to, the warranty expressed therein. Isabellenhütte makes no warranty, representation or guarantee other than as set forth in its terms and conditions of sale. Information provided in datasheets and/or specifications may vary from actual results in different applications. Any statements made by Isabellenhütte regarding the suitability of products for certain types of applications are based on its knowledge of typical requirements that are often placed on its products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in the application intended. No license, express or implied, or otherwise, to any intellectual property rights is granted by this document. Any and all liability arising out of the application or use of any product shall be as set forth in Isabellenhütte’s terms and conditions of sale.