EMG8 ROHM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Rev.A 1/2 Emitter common (dual digital transistors) EMG8 / UMG8N / FMG8A zFeatures 1) Two DTC143Z chips in a EMT or UMT or SMT package. 2) Mounting cost and area can be cut in half. zStructure Epitaxial planar type NPN silicon transistor (Built-in resistor type) The following characteristics apply to both the DTr1 and DTr2. zEquivalent circuit EMG8 / UMG8N FMG8A R1 R1 DTr1DTr2 (3) (4) (5) (2) (1) R1=4.7kΩ R2=47kΩR2 R2R1 R1 DTr1DTr2 (3) (2) (1) (4) (5) R1=4.7kΩ R2=47kΩR2 R2 zAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit VCC 50 V VVIN IO 100 mA IC (Max.) 100 Tj 150 ˚C Tstg −55 to +150 ˚C Pd EMG8, UMG8N 150 (TOTAL) mW FMG8A 300 (TOTAL) Supply voltage Input voltage Output current Junction temperature Storage temperature Power dissipation ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. zExternal dimensions (Unit : mm) ROHM : EMT5 EMG8 ROHM : UMT5 EIAJ : SC-88A UMG8N Each lead has same dimensions Each lead has same dimensions Each lead has same dimensions 0to0.1 1.1 0.8 0.3to0.6 0.15 1.6 2.8 2.9 0.95 1.9 (4)(5) (1) 0.3 (3) 0.95 (2) Abbreviated symbol : G8 Abbreviated symbol : G8 Abbreviated symbol : G8 ROHM : SMT5 EIAJ : SC-74A FMG8A 0.9 0.15 0to0.1 0.1Min. 0.7 2.1 1.3 0.65 2.0 (4) (1) (5) 0.2 1.25 (2) 0.65 (3) 0.22 1.2 1.6 (1) (2) (3) (5) (4) 0.13 0.5 0.50.5 1.0 1.6

Rev.A 2/2 zElectrical characteristics (Ta = 25°C) Parameter Symbol II GI R2/R1 Min. 1.3 3.29 0.1 4.7 0.5 0.3 1.8 0.5 6.11 V VCC=5V, IO=100µA VO=0.3V, IO=5mA IO=5mA, II=0.25mA VI=5V VCC=50V, VI=0V VO=5V, IO=10mA V mA µA kΩ Typ. Max. Unit Conditions VI (off) VI (on) VO (on) IO (off) fT − 250 − VCE=10V, IE=−5mA, f=100MHz ∗MHz ∗ Transition frequency of the device Input voltage Output voltage Input current Output current Input resistance DC current gain Transition frequency Resistance ratio zPackaging specifications Package Code TR T148 3000 3000 Taping Basic ordering unit (pieces) UMG8N T2R 8000 EMG8 FMG8A Type zElectrical characteristic curves VO=0.3V 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m100m 100 500m 200m 100m INPUT VOLTAGE : VI (on) (V) OUTPUT CURRENT : IO (A) 25˚C 100˚C Ta=−40˚C Fig.1 Input voltage vs. output current (ON characteristics) VCC=5V 10m 500µ 200µ 100µ 50µ 20µ 10µ INPUT VOLTAGE : VI (off) (V) OUTPUT CURRENT : Io (A) Ta=100˚C 25˚C −40˚C Fig.2 Output current vs. input voltage (OFF characteristics) VO=5V 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m100m 500 200 100 OUTPUT CURRENT : IO (A) DC CURRENT GAIN : GI Ta=100˚C 25˚C −40˚C Fig.3 DC current gain vs. output current 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m100m 500m 200m 100m 50m 20m 10m lO/lI=20 OUTPUT CURRENT : IO (A) OUTPTUT VOLTAGE : VO (on) (V) Ta=100˚C 25˚C −40˚C Fig.4 Output voltage vs. output current

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.