FEPB16AT GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage -50 to 600 Volts Forward Current -16.0 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Dual rectifier construction, positive centertap ♦ Glass passivated chip junctions ♦ Low power loss ♦ Low forward voltage, high current capability ♦ High surge current capability ♦ Superfast recovery times for high efficiency ♦ High temperature soldering in accordance with CECC 802 / Reflow guaranteed MECHANICAL DATA Case: JEDEC TO-263AB molded plastic body Terminals:Plated leads solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Weight:0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. FEPB FEPB FEPB FEPB FEPB FEPB FEPB FEPB SYMBOLS 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 500 600 Volts Maximum RMS voltage V RMS 35 70 105 140 210 280 350 420 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 500 600 Volts Maximum average forward rectified current at TC =100°C I(AV) 16.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at T C =100°C per leg IFSM 200.0 Amps Maximum instantaneous forward voltage per leg at 8.0A VF 0.95 1.3 1.5 Volts Maximum DC reverse current T C =25°C 10.0 at rated DC blocking voltage per leg TC =100°C IR 500.0 µA Maximum reverse recovery time (NOTE 1) per leg trr 35.0 50.0 ns Typical Junction C apacitance per leg (NOTE 2) C J 85.0 60.0 pF Typical thermal resistance (NOTE 3) R Θ JC 2.2 °C/W Operating junction and storage temperature range TJ, TSTG -55 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case per leg mounted on heatsink TO-263AB Dimensions are in inches and (millimeters) -T-SEATING PLATE 0.380 (9.65) 0.420 (10.67) 0.320 (8.13) 0.625 (15.88) 0.027 (0.686) 0.037 (0.940) 1 2 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40) 0.018 (0.46) 0.025 (0.64) 0.080 (2.03) 0.110 (2.79) 0.090 (2.29) 0.110 (2.79) 0.245 (6.22) MIN - HEATSINK PIN 1 K K 0.095 (2.41) 0.100 (2.54) K PIN 2 0.047 (1.19) 0.055 (1.40) NEW PRODUCT NEW PRODUCT NEW PRODUCT
RATINGS AND CHARACTERISTICS CURVES FEPB16AT THRU FEPB16JT 0 50 100 1500 4.0 8.0 0.1 0.1 1 10 100 100 1,000 0 2 04 06 08 0 1 0 0 0.01 0.1 100 1 10 1000 100 150 200 250 300 FIG. 1 - FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 4 -TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES REVERSE VOLTAGE, VOLTS TJ=125°C f=1.0 MHZ Vsig=50mVp-p TJ=125°C TJ=125°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, %FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF TJ=25°C TJ=100°C 500-600V 50-400V TJ=25°C 50-400V 300-400V 500-600V RESISTIVE OR INDUCTIVE LOAD FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES TC =100°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 50V-400V 600V-1000V