FEP30AP GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 30.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Dual rectifier construction, positive center-tap ♦ Glass passivated chip junctions ♦ Superfast recovery times for high efficiency ♦ Low forward voltage, high current capability ♦ Low thermal resistance ♦ Low power loss ♦ High temperature soldering guaranteed: 250°C, 0.16” (4.06mm) from case for 10 seconds MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body over passivated chips Terminals:Plated leads solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:10 in. - lbs. max. Weight:0.22 ounce, 6.3 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. FEP FEP FEP FEP FEP FEP FEP FEP SYMBOLS 30AP 30BP 30CP 30DP 30FP 30GP 30HP 30JP UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 500 600 Volts Maximum RMS voltage V RMS 35 70 105 140 210 280 350 420 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 500 600 Volts Maximum average forward rectified current at TC =100°C I(AV) 30.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 300.0 Amps on rated load (JEDEC Method) at TC =100°C Maximum instantaneous forward voltage per leg at 15.0A VF 0.95 1.3 1.5 Volts Maximum DC reverse current TC =25°C 10.0 at rated DC blocking voltage TC =100°C IR 500.0 µA Maximum reverse recovery time time(NOTE 1) per leg trr 35.0 50.0 ns Typical junction capacitance per leg (NOTE 2) C J 175.0 145.0 pF Typical thermal resistance(NOTE 3)R Θ JC 1.0 °C/W Operating storage and temperature range T J, TSTG -55 to +150 °C NOTES: 1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case per leg mounted on heatsink PIN 1 PIN 3 CASE 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.142 (3.6) 0.138 (3.5) 0.170 (4.3) 0.086 (2.18) 0.076 (1.93) 0.160 (4.1) 0.140 (3.5) 0.225 (5.7) 0.205 (5.2) 0.127 (3.22) 0.117 (2.97) 0.048 (1.22) 0.044 (1.12) 0.795 (20.2) 0.775 (19.6) 0.840 (21.3) 0.820 (20.8) 1 2 3

0.078 REF

(1.98) 0.203 (5.16) 0.193 (4.90) 10o TYP. BOTH SIDES 30o10o 1o REF. 0.118 (3.0) 0.108 (2.7) 0.030 (0.76) 0.020 (0.51) BOTH SIDES PIN 2 TO-247AD Dimensions in inches and (millimeters)

RATINGS AND CHARACTERISTIC CURVES FEP30AP THRU FEP30JP 0 50 100 1500 6.0 11 0 1 0 0 100 150 200 250 300 0.1 0.1 1 10 100 100 1,000 02 0 4 0 6 0 8 0 1 0 0 0.1 100 1,000 FIG. 1 - FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS TC =100°C 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT, AMPERES REVERSE VOLTAGE, VOLTS TJ=25°C f=1.0 MHZ Vsig=50mVp-p RESISTIVE OR INDUCTIVE LOAD TJ=125°C NUMBER OF CYCLES AT 60 H Z TJ=100°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=25°C 500-600V 50-400V TJ=25°C TJ=25°C 300-400V 500-600V 50-200V 300-600V 50-200V