FEP16AT GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FAST EFFICIENT PLASTIC RECTIFIER Reverse Voltage -50 to 600 Volts Forward Current -16.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Dual rectifier construction, positive centertap ♦ Glass passivated chip junctions ♦ Low power loss ♦ Low forward voltage, high current capability ♦ High surge current capability ♦ Superfast recovery times for high efficiency ♦ High temperature soldering guaranteed: 250°C, 0.16" (4.06mm) from case for 10 seconds MECHANICAL DATA Case: JEDEC TO-220AB molded plastic body over passivated chips Terminals:Plated leads solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:5 in. - lbs. max. Weight:0.08 ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. FEP FEP FEP FEP FEP FEP FEP FEP SYMBOLS 16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 300 400 500 600 Volts Maximum RMS voltage V RMS 35 70 105 140 210 280 350 420 Volts Maximum DC blocking voltage V DC 50 100 150 200 300 400 500 600 Volts Maximum average forward rectified current at TC =100°C I(AV) 16.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 200.0 Amps Maximum instantaneous forward voltage per leg at 8.0A VF 0.95 1.3 1.5 Volts Maximum DC reverse current T C =25°C 10.0 at rated DC blocking voltage per leg TC =100°C IR 500.0 µA Maximum reverse recovery time (NOTE 1) per leg trr 35.0 50.0 ns Typical Junction C apacitance per leg (NOTE 2) C J 85.0 60.0 pF Typical thermal resistance (NOTE 3) R Θ JA 15.0 °C/WR Θ JC 2.2 Operating junction and storage temperature range TJ, TSTG -55 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink 0.415 (10.54) MAX. 0.154 (3.91) 0.148 (3.74)DIA. 0.113 (2.87) 0.103 (2.62) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 0.160 (4.06) 0.140 (3.56) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) 0.110 (2.79) 0.100 (2.54) PIN 1 2 3 PIN 1 PIN 3 CASE 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.410 (10.41) 0.390 (9.91) 0.105 (2.67) 0.095 (2.41) 0.635 (16.13) 0.625 (15.87) 0.560 (14.22) 0.530 (13.46) PIN 2 0.370 (9.40) 0.360 (9.14) TO-220AB Dimensions are in inches and (millimeters)

RATINGS AND CHARACTERISTICS CURVES FEP16AT THRU FEP16JT 0 50 100 1500 4.0 8.0 0.1 0.1 1 10 100 100 1,000 0 2 04 06 08 0 1 0 0 0.01 0.1 100 1 10 1000 100 150 200 250 300 FIG. 1 - FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 4 -TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS FORWARD CURRENT, AMPERES REVERSE VOLTAGE, VOLTS TJ=125°C f=1.0 MHZ Vsig=50mVp-p TJ=125°C TJ=125°C INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES PERCENT OF RATED PEAK REVERSE VOLTAGE, %FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF TJ=25°C TJ=100°C 500-600V 50-400V TJ=25°C 50-400V 300-400V 500-600V RESISTIVE OR INDUCTIVE LOAD FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 50-400V 500-600V