FE2A GE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED FAST EFFICIENT RECTIFIER Reverse Voltage - 50 to 200 Volts Forward Current -2.0 Amperes
FEATURES
♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Superfast recovery time for high efficiency ♦ Low forward voltage, high current capability ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Hermetically sealed package ♦ Low leakage ♦ High surge capability ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.002 ounce, 0.56 gram MAXIMUM RATINGS AND MECHANICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS FE2A FE2B FE2C FE2D UNITS Maximum repetitive peak reverse voltage V RRM 50 100 150 200 Volts Maximum RMS voltage V RMS 35 70 105 140 Volts Maximum DC blocking voltage V DC 50 100 150 200 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=75°C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 50.0 Amps on rated load (JEDEC Method) Maximum instantaneous forward voltage at 2.0A V F 0.95 Volts Maximum DC reverse current T A=25°C 2.0 at rated DC blocking voltage T A=100°C IR 50.0 µA Maximum reverse recovery time (NOTE 1) trr 35.0 ns Typical junction capacitance (NOTE 2) C J 45.0 pF Typical thermal resistance (NOTE 3, 4) R Θ JA 60.0 °C/WR Θ JL 20.0 Operating junction and storage temperature range T J, TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC (4) Thermal resistance from junction to lead at 0.375” (9.5mm) lead length with both leads attached to heatsinks 0.034 (0.86) 0.028 (0.71) DIA. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 1.0 (25.4) MIN. DO-204AP Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 PATENTED*
0.01 0.1 0.1 11 0 1 0 0 105 02 5 5 0 75 100 125 150 175 0.5 1.0 1.5 2.0 2.5 3.0 0 20 40 60 80 100 0.01 0.1 100 1,000 RATINGS AND CHARACTERISTIC CURVES FE2A THRU FE2D FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTIONVCAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=125°C TJ=100°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=50mVp-p RESISTIVE OR INDUCTIVE LOAD 0.375” (9.5mm) TL 0.8 x 0.8 x 0.04" COPPER HEATSINKS (20 x 20 x 1.0mm) L