DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Page 1 of 2 www.aecsensors.com Sales Department Tel: (888) 847-6552 Float Controls sealed mechanical switch - narrow angle Custom designed float switch for liquid level control. Designed for use with liquid level warning alarms, pilot duty control of simplex or duplex systems, sump pumps or any type of high/low operation. Avail- able with standard power cords or custom cords with quick-connect plugs, these floats can serve as original equipment components, retrofit, or as replacement parts. Tested to a water depth of 60 feet. Ref: FSME NARROW 111513JHM UL and CSA Recognized Ordering Codes F 1 2 3 4 5 6 7 8 9 Float Color Cord Termination Cord Length Code 1 Code 4 Code 6 Code 7 C Gray 1 120VAC Series Tap Plug* 1 0 10 feet F Yellow 3 Plain Cut 2 0 20 feet G Black A Custom 3 0 30 feet M Blue Cord Type A A Custom length D Red Code 5 H Green 7 SJTO 16/2
8 SJTO 16/3
Mechanical Switch Special Options Code 2 Code 3 Operating angle & Switch Description Code 8 Code 9 N A 44.5° 13A, 1/2 HP, SPST-NO (Normally Open) A W includes Weight Kit 4438 N B 44.5° 13A, 1/2 HP, SPST-NC (Normally Closed) N C 44.5° 13A, 1/2 HP, SPDT (Changeover) Note: * = UL Listed. Only available with 10ft cable (Cord length Code 10) Example: FCNA3710AW Gray Float, SPST-NO mechanical switch, plain cut cord termination, SJTO 16/2 cord type, cord length 10 feet with weight kit. Not all part number combinations are active. Set up charges may apply. Please contact factory for availability. Contact factory for custom requirements or specific application information American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516
Page 2 of 2 www.aecsensors.com Sales Department Tel: (888) 847-6552 Float Controls sealed mechanical switch - narrow angle Ref: FSME NARROW 111513JHM Float switches are for use with motor-operated water pumps only, not for swimming pool use. Recommended operating temperature range is 32°F to 160°F (0°C to 71°C) American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana IN46516 The inches of water pumped is determined by float tether length and location. Typical Application Specifications are subject to change without notice. E&OE. Narrow Angle 44.5°, approximate operating angle Tether length, inches (x) 3 4 6 8 Water pumped, inches (y) 3.5 4.5 5.5 6 Make Angle (approximate) 39° Break Angle (approximate) 5.5°