FCN14875 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 35
Technical content
Product Number FCN14875_JENNY-T4 Family Jenny Type Pack Color clear Diameter 35 + 50 mm Height 17,02 mm Style rectang Optic Material Silicone Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 18/10/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V10 Gen6 asymmetric degStreetligh...93 % 0.460 - V10 Gen7 sim: AsymmetricStreetligh...sim: 93 %sim: 0.440 - CLL02x/CLU02x (LES10) asymmetric degStreetligh...93 % 0.460 - CXA/B 15xx Asymmetric degStreetligh...94 % 0.480 - XM-L EZW asymmetric degStreetligh...93 % 0.680 - MK-R asymmetric degStreetligh...93 % 0.560 - MX-6 asymmetric degStreetligh...92 % 0.610 - XHP70 asymmetric degStreetligh...91 % 0.500 - LUXEON M/MX asymmetric degStreetligh...94 % 0.660 - CXM-9 asymmetric degStreetligh...93 % 0.460 - Soleriq P9 asymmetric degStreetligh...94 % 0.470 - Duris P10 sim: AsymmetricStreetligh...sim: 92 %sim: 0.560 - MJT COB LES 6 Asymmetric degStreetligh...92 % 0.540 - SLE G5 LES6 Asymmetric degStreetligh...93 % 0.600 - SLE G5 LES11 Asymmetric degStreetligh...92 % 0.450 - May 29th 2017 5:03 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
B C A D Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT SHEET SIZE DRAWING TITLE FCN14875_JENNY-T4 PART NUMBER FCN14875 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. A4 INDEX PART NO DESCRIPTION MATERIAL COLOUR
1 F14563 JENNY-T4 Silicone Clear
2 C14436 JENNY-HLD-A-BLK PC Black
9,8 g Front view 18.01 With pin 17.01 Bottom view 41.5 C/C 25.4 C/C Top view
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.