FCBN425QE1C01 FINISAR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Finisar Corporation January 2016 B3 Page 1 Product Specification 100G Quadwire® QSFP28 Active Optical Cable FCBN425QE1Cxx PRODUCT FEATURES Four-channel full-duplex active optical cable Multirate capability: 10 Gb/s to 25 Gb/s per channel QSFP28 high-density form factor Reliable VCSEL array technology using multimode fiber Round OFNP-rated cable Hot Pluggable Low power dissipation: <3.5W per cable end (<2.5W with CDRs off) Commercial operating case temperature range: 0ºC to 70ºC RoHS-6 Compliant Compliant to RoHS Directive 2011/65/EU
APPLICATIONS
10/25/40/100G Ethernet PRODUCT SELECTION (Standard Lengths*) FCBN425QE1C01 1-meter cable FCBN425QE1C03 3-meter cable FCBN425QE1C05 5-meter cable FCBN425QE1C10 10-meter cable FCBN425QE1C15 15-meter cable FCBN425QE1C20 20-meter cable FCBN425QE1C30 30-meter cable FCBN425QE1C50 50-meter cable FCBN425QE1CX0 100-meter cable *For availability of additional cable lengths or cable types, please contact Finisar.
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 2 I. Pin Descriptions Figure 1 – QSFP28-compliant 38-pin connector (per SFF-8679) Pin Symbol Name/Description Notes
1 GND Ground 1
2 Tx2n Transmitter Inverted Data Input
3 Tx2p Transmitter Non-Inverted Data Input
4 GND Ground 1
5 Tx4n Transmitter Inverted Data Input
6 Tx4p Transmitter Non-Inverted Data Input
7 GND Ground 1
8 ModSelL Module Select
9 ResetL Module Reset
10 Vcc Rx +3.3 V Power supply receiver
11 SCL 2-wire serial interface clock
12 SDA 2-wire serial interface data
13 GND Ground 1
14 Rx3p Receiver Non-Inverted Data Output
15 Rx3n Receiver Inverted Data Output
16 GND Ground 1
17 Rx1p Receiver Non-Inverted Data Output
18 Rx1n Receiver Inverted Data Output
19 GND Ground 1
20 GND Ground 1
21 Rx2n Receiver Inverted Data Output
22 Rx2p Receiver Non-Inverted Data Output
23 GND Ground 1
24 Rx4n Receiver Inverted Data Output
25 Rx4p Receiver Non-Inverted Data Output
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 3
26 GND Ground 1
27 ModPrsL Module Present
28 IntL Interrupt
29 Vcc Tx +3.3 V Power supply transmitter 30 Vcc1 +3.3 V Power Supply
31 LPMode Low Power Mode
32 GND Ground 1
33 Tx3p Transmitter Non-Inverted Data Input
34 Tx3n Transmitter Inverted Data Input
35 GND Ground 1
36 Tx1p Transmitter Non-Inverted Data Input
37 Tx1n Transmitter Inverted Data Input
38 GND Ground 1
- Circuit ground is internally isolated from chassis ground. II. General Product Characteristics Parameter Value Unit Notes Module Form Factor QSFP28 As defined by SFF-8661 Number of Lanes 4 Tx and 4 Rx Maximum Aggregate Data Rate 103.125 Gb/s Maximum Data Rate per Lane 25.781 Gb/s Standard Cable Lengths 1, 3, 5, 10, 15, 20, 30, 50, 100 meters Other lengths may be available upon request Protocols Supported Typical applications include 10/25/40G/100G Ethernet, 4/8/16/32G Fibre Channel Electrical Interface and Pin-out 38-pin edge connector Pin-out as defined by SFF-8679 Standard Optical Cable Type Multimode round fiber cable, plenum-rated OFNP. Low Smoke Zero Halogen (LSZH), round fiber cable also available Maximum Power Consumption per End 3.5 (retimed Tx) 2.5 (unretimed) Watts Varies with output voltage swing and pre-emphasis settings Management Interface Serial, I2C-based, 450 kHz maximum frequency As defined by SFF-8636 Data Rate Specifications Symbol Min Typ Max Units Ref. Bit Rate per Lane BR 10.000 25.781 25.781 Gb/sec 1 Pre-FEC Bit Error Ratio BER 10-6 2 Post-FEC Bit Error Ratio BER 10-12 2, 3 Notes: 1. Supports 10/25/40/100 Gigabit Ethernet applications. 2. Tested with a PRBS 231-1 test pattern. 3. Assumes FEC provided by host system.
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 4 III. Absolute Maximum Ratings Parameter Symbol Min Typ Max Unit Ref. Maximum Supply Voltage Vcc1, VccTx, VccRx -0.5 3.6 V Storage Temperature TS -40 85 C 1 Case Operating Temperature TOP 0 70 C Relative Humidity RH 0 85 % 2 Notes: 1. Assumes no mechanical load force on the unit. Ensuring no mechanical load force requires a cable bend radius of >105 mm within 100 mm of either cable end module and >60 mm on the rest of the cable. 2. Non-condensing. IV. Electrical Characteristics (TOP = 0 to 70C, VCC = 3.3 ± 5% Volts) NOTE: The 100G Quadwire requires an electrical connector compliant with SFF-8662 or SFF-8672 be used on the host board to guarantee its electrical interface specification. Please check with your connector supplier. Parameter Symbol Min Typ Max Unit Ref. Supply Voltage Vcc1, VccTx, VccRx 3.15 3.45 V Supply Current Icc 1010 mA Power Dissipation per cable end P 3.5 W 1, 2 Link Turn-On Time Transmit turn-on time 2000 ms 3 Input electrical specifications (per Lane) Differential Voltage pk-pk 900 mV Common Mode Noise RMS 17.5 mV Differential Termination Resistance Mismatch 10 % Differential Return Loss SDD22 dB Common Mode to Differential conversion and Differential to Common Mode Conversion SDC22, SCD22 dB Common Mode Return Loss SCC22 -2 dB Transition Time, 20 to 80% Tr, Tf 10 ps Common Mode Voltage Vcm -0.3 2.8 V Eye Width at 1E-15 probability EW15 0.46 UI Eye Height at 1E-15 probability EH15 94 mV Output electrical specifications (per Lane) Differential Voltage pk-pk 900 mV Common Mode Voltage Vcm -350 2850 mV Common Mode Noise RMS 17.5 mV Differential Termination Resistance Mismatch 10 % Differential Return Loss SDD22 dB Common Mode to Differential conversion and Differential to Common Mode Conversion SDC22, SCD22 Common Mode Return Loss SCC22 -2 dB Transition Time, 20 to 80% Tr, Tf 9.5 ps Vertical Eye Closure VEC 5.5 dB Eye Width at 1E-15 probability EW15 0.57 UI Eye Height at 1E-15 probability EH15 228 mV Per OIF CEI-28G-VSR and CAUI-4 requirements Per OIF CEI-28G-VSR and CAUI-4 requirements
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 5 Notes: 1. Maximum total power value is specified across the full temperature and voltage range. 2. Settable in various discrete steps via the I2C interface. 3. From power-on and end of any fault conditions. V. Memory Map and Control Registers Compatible with SFF-8636. Please see Finisar Application Note AN-21507. VI. Environmental Specifications Finisar 100G Quadwire Active Optical Cables have an operating temperature range from 0°C to +70°C case temperature. Environmental Specifications Symbol Min Typ Max Units Ref. Case Operating Temperature Top 0 70 °C Storage Temperature Tsto -10 70 °C VII. Regulatory Compliance Finisar 100G Quadwire Active Optical Cables are RoHS-6 Compliant. Copies of certificates to be available at Finisar Corporation upon request. 100G Quadwire Active Optical Cables are Class 1 laser eye safety compliant per IEC 60825-1. Standard fiber cable type is round-section construction, plenum-rated. Other cable types can be supported upon request such as LSZH, round-section construction. VIII. Mechanical Specifications The 100G Quadwire mechanical specifications are compliant with the QSFP28 transceiver module specifications (as defined in SFF-8661), substituting the MPO12 receptacle with a fiber optics cable connecting both ends.
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 6 Figure 2 – 100G Quadwire mechanical drawing Insertion, Extraction and Retention Forces Min Max Units Notes Cable Proof (Tensile) Test (0º) 44.0 Newtons Cable Proof (Tensile) Test (90º) 33.0 Newtons Impact 8 Cycles 1.5m drop Flex 8.9 Newtons Twist 13.0 Newtons Module retention 90 N/A Newtons No damage below 90N Host Connector Retention 180 N/A Newtons No damage below 180N
FCBN425QB1Cxx Product Specification Finisar Corporation January 2016 B3 Page 7 IX. References 1. InfiniBand™ Architecture Release, Vol. 2 – Physical Specifications, Rev. 1.3, November 2012. 2. SFF-8665 – QSFP+ 28Gb/s 4X Pluggable Transceiver Solution (QSFP28), Rev 1.8, May, 2013. 3. SFF-8636 – Specification for Common Management Interface, Rev 1.7, January 2014. 4. “CAUI-4” Retimed 4x25G electrical interface, to be defined by IEEE 802.3 5. CEI-28G-VSR Implementation Agreement, per OIF 2012.290.00 6. Directive 2011/65/EU of the European Council Parliament and of the Council, “on the restriction of the use of certain hazardous substances in electrical and electronic equipment.” Certain products may use one or more exemptions as allowed by the Directive. 7. “Application Note AN-2150: EDR Quadwire EEPROM Mapping.” X. For More Information Finisar Corporation
1389 Moffett Park Drive
Sunnyvale, CA 94089-1133 Tel. 1-408-548-1000 Fax 1-408-541-6138 sales@finisar.com www.finisar.com