FCBGD10CD1C03

FCBGD10CD1C03 FINISAR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Finisar Corporation – 12-Jul-12 Rev B8 Page 1 Product Specification C.wire® 120 Gb/s Parallel Active Optical Cable FCBGD10CD1Cxx PRODUCT FEATURES 12-channel full-duplex active optical cable Electrical interface only Multirate capability: 1.06Gb/s to 10.5Gb/s per channel Complies with CXP high-density form factor requirements Low power dissipation: <3.5W per cable end Requires 3.3V power supply only Reliable VCSEL array technology using multimode fiber Available in standard lengths of 3, 5, 10, 20, 30, 50 and 100m* Hot Pluggable Built-in digital diagnostic functions Commercial operating temperature range: 0ºC to 70ºC RoHS-6 Compliant (lead-free)

APPLICATIONS

Proprietary Interconnections SATA/SAS3 PRODUCT SELECTION FCBGD10CD1C03 3-meter cable FCBGD10CD1C05 5-meter cable FCBGD10CD1C10 10-meter cable FCBGD10CD1C20 20-meter cable FCBGD10CD1C30 30-meter cable FCBGD10CD1C50 50-meter cable FCBGD10CD1CX0 100-meter cable *For availability of additional cable lengths, please contact Finisar.

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 2 I. Pin Descriptions Figure 1 – CXP-compliant 84-pin connector

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 3 Pin Symbol Name/Description Notes A1 GND Ground 1 A2 Tx1p Transmitter Non-Inverted Data Input A3 Tx1n Transmitter Inverted Data Input A4 GND Ground 1 A5 Tx3p Transmitter Non-Inverted Data Input A6 Tx3n Transmitter Inverted Data Input A7 GND Ground 1 A8 Tx5p Transmitter Non-Inverted Data Input A9 Tx5n Transmitter Inverted Data Input A10 GND Ground 1 A11 Tx7p Transmitter Non-Inverted Data Input A12 Tx7n Transmitter Inverted Data Input A13 GND Ground 1 A14 Tx9p Transmitter Non-Inverted Data Input A15 Tx9n Transmitter Inverted Data Input A16 GND Ground 1 A17 Tx11p Transmitter Non-Inverted Data Input A18 Tx11n Transmitter Inverted Data Input A19 GND Ground 1 A20 SCL 2-wire serial interface clock A21 SDA 2-wire serial interface data B1 GND Ground 1 B2 Tx0p Transmitter Non-Inverted Data Input B3 Tx0n Transmitter Inverted Data Input B4 GND Ground 1 B5 Tx2p Transmitter Non-Inverted Data Input B6 Tx2n Transmitter Inverted Data Input B7 GND Ground 1 B8 Tx4p Transmitter Non-Inverted Data Input B9 Tx4n Transmitter Inverted Data Input B10 GND Ground 1 B11 Tx6p Transmitter Non-Inverted Data Input B12 Tx6n Transmitter Inverted Data Input B13 GND Ground 1 B14 Tx8p Transmitter Non-Inverted Data Input B15 Tx8n Transmitter Inverted Data Input B16 GND Ground 1 B17 Tx10p Transmitter Non-Inverted Data Input B18 Tx10n Transmitter Inverted Data Input B19 GND Ground 1 B20 VCC3.3-TX +3.3 V Power supply transmitter B21 VCC12-TX +12.0 V Power supply transmitter - NOT CONNECTED 2 C1 GND Ground 1 C2 Rx1p Receiver Non-Inverted Data Output C3 Rx1n Receiver Inverted Data Output C4 GND Ground 1 C5 Rx3p Receiver Non-Inverted Data Output C6 Rx3n Receiver Inverted Data Output C7 GND Ground 1 C8 Rx5p Receiver Non-Inverted Data Output

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 4 C9 Rx5n Receiver Inverted Data Output C10 GND Ground 1 C11 Rx7p Receiver Non-Inverted Data Output C12 Rx7n Receiver Inverted Data Output C13 GND Ground 1 C14 Rx9p Receiver Non-Inverted Data Output C15 Rx9n Receiver Inverted Data Output C16 GND Ground 1 C17 Rx11p Receiver Non-Inverted Data Output C18 Rx11n Receiver Inverted Data Output C19 GND Ground 1 C20 PRSNT_L Module Present C21 Int_L/Reset_L Interrupt / Reset D1 GND Ground 1 D2 Rx0p Receiver Non-Inverted Data Output D3 Rx0n Receiver Inverted Data Output D4 GND Ground 1 D5 Rx2p Receiver Non-Inverted Data Output D6 Rx2n Receiver Inverted Data Output D7 GND Ground 1 D8 Rx4p Receiver Non-Inverted Data Output D9 Rx4n Receiver Inverted Data Output D10 GND Ground 1 D11 Rx6p Receiver Non-Inverted Data Output D12 Rx6n Receiver Inverted Data Output D13 GND Ground 1 D14 Rx8p Receiver Non-Inverted Data Output D15 Rx8n Receiver Inverted Data Output D16 GND Ground 1 D17 Rx10p Receiver Non-Inverted Data Output D18 Rx10n Receiver Inverted Data Output D19 GND Ground 1 D20 Vcc3.3-RX +3.3 V Power supply receiver D21 Vcc12-RX +12.0 V Power supply receiver - NOT CONNECTED 2 Notes 1. Circuit ground is internally isolated from chassis ground. 2. 12V power supply not required.

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 5 II. General Product Characteristics Parameter Value Unit Notes Module Form Factor CXP Number of Lanes 12 Tx and 12 Rx Maximum Aggregate Data Rate 126 Gb/s Maximum Data Rate per Lane 10.5 Gb/s Standard Cable Lengths 3, 5, 10, 20, 30, 50, 100 meters Other lengths may be available upon request, up to 300 meters Protocols Supported Typical applications include Infiniband, Fibre Channel, 100G Ethernet, SATA/SAS3 Electrical Interface and Pin-out 84-pin edge connector Pin-out as defined in the CXP Specification by the IBTA Standard Optical Cable Type Multimode fiber ribbon, flat cable assembly, LSZH/riser- rated Maximum Power Consumption per End

3.5 Watts Varies with output voltage swing

(see Figure 5) Management Interface Serial, I2C-based, 400 kHz maximum frequency As defined by the CXP Specification Data Rate Specifications Symbol Min Typ Max Units Ref. Bit Rate per Lane BR 1000 10500 Mb/sec 1 Bit Error Ratio BER 10-12 2 Notes: 1. Infiniband SDR/DDR/QDR, 1/10 Gigabit Ethernet, 1/2/4/8/10G Fibre Channel. 2. Tested with a PRBS 231-1 test pattern. III. Absolute Maximum Ratings Parameter Symbol Min Typ Max Unit Ref. Maximum Supply Voltage Vcc1, VccTx, VccRx -0.5 3.6 V Storage Temperature TS -40 85 C Case Operating Temperature TOP 0 70 C Relative Humidity RH 0 85 % 1 Notes: 1. Non-condensing.

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 6 IV. Electrical Characteristics (TOP = 0 to 70 C, VCC = 3.3 ± 5% Volts) Parameter Symbol Min Typ Max Unit Ref. Supply Voltage Vcc1, VccTx, VccRx 3.15 3.45 V Supply Current Icc 850 1000 mA Link Turn-On Time Transmit Turn-On Time 2000 ms 1 Transmitter (per Lane) Single-ended input voltage tolerance VinT -0.3 4.0 V Differential data input swing Vin,pp 120 1200 mVpp 2 Differential input threshold 50 mV Receiver (per Lane) Differential data output swing Vout,pp 0 800 mVpp 3,4 Power Supply Ripple Tolerance PSR 50 mVpp Notes: 1. From power-on and end of any fault conditions. 2. AC coupled internally. See Figure 2 for input eye mask requirements. Self -biasing 100 differential input. 3. AC coupled with 100 differential output impedance. See Figure 3 for output eye mask. 4. Settable in 4 discrete steps. See Figure 5 for Vout settings V. High-Speed Electrical Characteristics per Lane (TOP = 0 to 70 C, VCC = 3.3 ± 5% Volts) Parameter –Inputs Symbol Conditions Min Typ Max Units Ref. Reference Differential Input Impedance Zd 100 Ω Termination Mismatch ΔZM 5 % 1 Input AC Common Mode Voltage 25 mV (RMS) Differential Input Return Loss SDD11 0.01-4.1 GHz dB 2 4.1 – 11.1 GHz dB 3 Differential to Common Mode Loss SCD11 0.01-11.1 GHz -10 dB Jitter Tolerance (Deterministic) DJ 0.15 UI Jitter Tolerance (Total) TJ 0.30 UI Notes: 1. See SFF-8431 Rev 3.2 (SFP+) section D.15 Termination Mismatch for definition & test recommendations 2. Reflection coefficient given by equation SDD11(dB)< -12+2*SQRT(f), with f in GHz. See Figure 4.

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 7 -500 -400 -300 -200 -100 100 200 300 400 500 0 0.2 0.4 0.6 0.8 1 UI Vdiff (mV) Figure 2 – Transmitter Input Differential Signal Mask Parameter –Outputs Symbol Conditions Min Typ Max Units Ref. Reference Differential Output Impedance Zd 100 Ω Termination Mismatch ΔZM 5 % Output AC Common Mode Voltage 15 mVRMS Output Rise and Fall time (20% to 80%) tRH, tFH 24 ps Differential Output Return Loss SDD22 0.01-4.1 GHz dB 1 4.1 – 11.1 GHz dB 2 Common Mode Output Return Loss SCC22 0.01-2.5 GHz dB 3 2.5-11.1 GHz -3 dB Notes: 1. Reflection coefficient given by equation SDD22(dB)< -12+2*SQRT(f), with f in GHz. See Figure 4. 2. Reflection coefficient given by equation SDD22(dB)< -6.3+13Log10(f/5.5), with f in GHz. See Figure 3. Reflection coefficient given by equation SCC22(dB)< -7+1.6*f, with f in GHz. Receiver Output Jitter Specification Symbol Min Typ Max Units Ref. Deterministic Jitter DJOUT 0.40 UI 1 Total Jitter TJOUT 0.72 UI 1 Notes: 1. When transmitter input jitter specs are met. Typical Total Jitter contribution for C.wire is 30 UI (typ).

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 8 Other Informational Specifications (not tested) Symbol Min Typ Max Units Ref. Low Frequency 3dB Cutoff fc 175 kHz Ch / Ch crosstalk -26 dB Output Pre-emphasis settings (user selectable) PE 0 mV 125 mV 175 mV 325 mV Pre-Emphasis pulse width 60 90 ps Channel Latency f(L) ps 1 Channels Skew 220 ps 2 Digital clock to data delay 25 ns Digital output rise/fall times 5 ns Digital input / output Cap 1 pF Digital input logic High 2 V Digital input logic Low 1 V ESD Signal pads 500 V HBM ESD (other pads) 2 kV HBM Notes: 1. Channel latency is a function of cable length L [m]. The typical value is given by the formula L/(0.7*c), where c = 3*10E+8 [m/s]. 2. The shown maximum skew value corresponds to a cable length of 100 meters. The typical skew in a 5- meter cable is 100 ps and in a 100-meter cable is 200 ps. -500 -400 -300 -200 -100 100 200 300 400 500 0 0.2 0.4 0.6 0.8 1 UI Vdiff (mV) Figure 3 – Receiver Output Differential Signal Mask

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 10 VII. Environmental Specifications Finisar C.wire active optical cables have an operating temperature range from 0°C to +70°C case temperature. Environmental Specifications Symbol Min Typ Max Units Ref. Case Operating Temperature Top 0 70 °C Storage Temperature Tsto -40 85 °C VIII. Regulatory Compliance Finisar C.wire active optical cables are RoHS-6 Compliant. Copies of certificates are available at Finisar Corporation upon request. C.wire active optical cables are laser eye safe so long as the fiber cable is intact. In case of a broken cable, the C.wire active optical cable should be treated as Class 1 per EN 60825- Fiber cable type is s LSZH/riser-rated, flat ribbon construction. Other cable types are available upon request.

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 11 IX. Mechanical Specifications The C.wire active optical cable mechanical specifications are based on the CXP Specification, substituting the MPO connectors with a cable connecting both ends. Figure 5 – C.wire mechanical drawing

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 12 Insertion, Extraction and Retention Forces Min Max Units Notes Cable Proof (Tensile) Test (0º) 44.0 Newtons Cable Proof (Tensile) Test (90º) 33.0 Newtons Impact Test 8 Cycles 1.5m drop Flex Test 8.9 Newtons Twist Test 13.0 Newtons Module retention 90 N/A Newtons No damage below 90N Host Connector Retention 180 N/A Newtons No damage below 180N Figure 6 – C.wire production-level product label (20-meter cable shown)

FCBGD10CD1Cxx Product Specification – July 2012 F i n i s a r Finisar Corporation – 12-Jul-12 Rev B8 Page 13 X. References 1. Supplement to Infiniband Architecture Specification, Volume 2, Release 1.2.1., Annex A6: "120 Gb/s 12x Small Form-factor Pluggable (CXP) - Interface Specification for Cables, Active Cables, & Transceivers", September 10, 2009 2. SFF-8431 Rev 3.2 (SFP+ Specification) XI. For More Information Finisar Corporation

1389 Moffett Park Drive

Sunnyvale, CA 94089-1133 Tel. 1-408-548-1000 Fax 1-408-541-6138 sales@finisar.com www.finisar.com