FC4A-L03A1 IDEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Synchronization Start-stop synchronization Maximum Delay in One Scan Approx. 4 ms Operating Temperature 0 to 55°C Operating Humidity 10 to 95% RH (no condensation) Recommended Cable Specifications Shielded multi-core cable 24AWG x 6 Dielectric strength 2000 V/min Insulation resistance 100 MΩ/km Maximum Cable Length 3m Connector on Mother Board MC1.5/10-G-3.81BK (Phoenix Contact) Applicable terminal block: FC4A-PMT10P (supplied) Isolation from Internal Circuit Transformer isolated Maximum Number of Communication Modules Slim type CPU module 5 max. All-in-one 24-I/O type CPU module 3 max. (see note below) Internal Current Draw 85 mA (5V DC) 0 mA (24V DC) Weight Approx. 100g Note: Use only the Slim MicroSmart Pentra CPU to connect to the expansion RS232C communication modules in combination with the function modules listed below (not applicable to the FC5A-C24R2 all-in-one module). Function Module Type No. Analog I/O Module FC4A-L03A1, FC4A-L03AP1, FC4A-J2A1, FC4A-J4CN1, FC4A-J8C1, FC4A-J8AT1, FC4A-K1A1, FC4A-K2C1 AS-Interface Master Module FC4A-AS62M Communication Specifications Communication Parameters Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400 Data Bits 7 or 8 Parity Odd, even, none Stop Bits 1 or 2 Protocol Maintenance Communication Possible (except for user pro- gram download and upload) User Communication Possible ©2007 IDEC Corporation. All Rights Reserved. IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: 408-745-5258 • www.idec.com Terminal Arrangement Terminal I/O Description RS (RTS) Output Request to Send (constant voltage terminal) ER (DTR) Output Data Terminal Ready SD (TXD) Output Transmit Data RD (RXD) Input Receive Data DR (DSR) Input Data Set Ready SG (SG) — Signal Ground NC — No connection — Functional ground (can be used as junction terminals of func- tional ground; not connected to the internal circuit) Dimensions (mm) 23.5 14.6 70.0 90.04.5∗ 3.8 ∗8.5 mm when the clamp is pulled out. 103.0 90.0 2-ø4. 6.3 23.5 3.0 Mounting Hole Layout Notes 1. WindLDR version 5.10 or higher is required. 2. Applicable FC5A CPU firmware is version 1.10 or higher. 3. WindLDR version 5.10 allows for firmware upgrade.