FBTA-228-BPFB-8 PF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
R
Release date 2019-05-06 13:31 Date of issue 2019-05-06 131423_eng.xml Technical data FBTA-228-BPFB-8 Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 General specifications Design / Mounting Motherboard based Supply Connection redundant Rated current I r 16 A Fieldbus interface Number of segments Simplex 8 Host-side Inve nsys FBM 228 Terminating resistor fixed Indicators/operating means Fault signal open collector, switched low Galvanic isolation Fieldbus segment/Fieldbus segment functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff Fieldbus segment/Supply functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V eff Directive conformity Electromagnetic compatibility Directive 2004/108/EC EN 61326-1:2006 Standard conformity Electromagnetic compatibility NE 21:2006 Degree of protection IEC 60529 Fieldbus standard IEC 61158-2 Shock resistance EN 60068-2-27 Vibration resistance EN 60068-2-6 Ambient conditions Relative humidity < 95 % non-condensing Shock resistance 15 g 11 ms Vibration resistance 1 g , 10 ... 150 Hz Mechanical specifications Connection type Cage tension spring terminals Core cross-section ≤ 2.5 mm2 Housing material ABS Housing width 242 mm Housing height 250 mm Housing depth 55 mm Degree of protection IP00 Mass approx. 1.3 kg Mounting DIN mounting rail Data for application in connection with hazardous areas Certificate TÜV 05 ATEX 2890 X Marking ¬ II 3G EEx nA II T4 Directive conformity Directive 94/9/EC EN 60079-15:2003 International approvals FM approval FM certificate FM 19 US 0015 X and FM 19 CA 0011 X FM marking AEx/Ex ec IIC T4 General information Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Release date 2019-05-06 13:31 Date of issue 2019-05-06 131423_eng.xml Technical data FBTA-228-BPFB-8 Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 Description:
1 Power Supply Modules, see separate data sheets
2 Fieldbus trunk connections
3 DIN rail slot
4 Motherboard
5 INVENSYS FBM 228 FOUNDATION Fieldbus modules
6 Connections for bulk power supply
7 Ethernet trunk Fieldbus connection
8 Fault output
9 ID DIP switch array
+ - S SEG1 + - S SEG2 + - S SEG3 + - S SEG4 + - S SEG5 + - S SEG6 + - S SEG7 + - S SEG8
Release date 2019-05-06 13:31 Date of issue 2019-05-06 131423_eng.xml Technical data FBTA-228-BPFB-8 Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 1 follows bulk power supply see manual HD2-FBPS-1.17.500 HD2-FBPS-1.23.500 HD2-FBPS-1.25.360 HD2-FBPS-1.500 HD2-FBCL-1.500 Power Output Current (mA) 500 500 360 500 500 Limit U0 (V) 17.5 24 - - - Device in ... Type of Protection Required Installation Components Zone 0/Div. 1 Intrinsically safe Ex ia FieldBarrier Zone 1/Div. 1 Intrinsically safe Ex ia FieldBarrier Zone 1/Div. 1 Flameproof Ex d Segment Protector R-SP-E12 or any Segment Protector installed in Zone 2 Div. 2 Non-incendive Any Segment Protector; power module selection depends on voltage of field device Safe Area No specific type of protection Segment Protector recommended Type code Description KT-MB-DMA Advanced Diagnostic Modu le, Kit for stand-alone Operation Compatible power modules Accessories Installation note