FBR51 FUJITSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

FBR51 N D12 – W1 ** [Example] (a) (b) (c) (d) (e) (a) Series Name FBR51 : Standard type (contact gap 0.3 mm) FBR52 : Wider contact gap type (contact gap 0.6 mm) (b) Enclosure N : Plastic sealed type (c) Nominal Voltage D06 : 6 VDC D09 : 9 VDC D10 : 10 VDC D12 : 12 VDC (d) Contact Material W1 : Silver-tin oxide indium (high power type) WL : Silver-tin oxide indium (lamp loads, see applications table) WF : Silver-tin oxide indium (flasher loads) (e) Custom Designation To be assigned custom specification n FEATURES l Compact and lightweight structure (42% of the volume of the FBR160 relay) l High current contact capacity (carrying current: 35 A/10 minutes, 25 A/1 hour) l High resistance to vibration and shock l Improved heat resistance and extended operation range l Two contact gap options (FBR51: 0.3 mm, FBR52: 0.6 mm) l Three types of contact material n ORDERING INFORMATION FBR51, 52 SERIES COMPACT POWER RELAY

1 POLE—30 A

(FOR AUTOMOTIVE APPLICATIONS)

FBR51, 52 SERIES n SPECIFICATIONS *1 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. Item Specifications W1 contact WL contact WF contact Contact Arrangement 1 form C 1 form A (SPST) 1 form A (SPST) Material Silver-tin oxide indium (high power type) Silver-tin oxide indium Silver-tin oxide indium Voltage Drop (resistance) Maximum 100mV (at 1A 12 VDC) Rating 14 VDC 25 A (motor free load)

120 Watt lamp at

14 VDC

80 Watt lamp at 14

Maximum Carrying Current 35A / 10 minuntes, 10A / 1hr (25°C, 100% rated coil voltage) Maximum Inrush Current (reference)

60 A 80 A

Max. Switching Current (reference)

35 A 16 VDC

Min. Switching Load*1 (reference)

6 VDC 1A

Coil Operating Temperature Range -40˚C to +85˚C (no frost) Storage Temperature Range -40˚C to +100˚C (no frost) Time Value Operate (at nominal voltage) Maximum 10ms Release (at nominal voltage) Maximum 5mx Life Mechanical 10 x 106 operations minimum Electrical 2 x 105 ops min.

14 VDC 25A

1.0 x 10 5 ops min.

115 Watts lamp,

2.5 x 10 6 ops min. Inrush 11A 14VDC (0.35 sec - ON / 0.35 sec - OFF) Other Vibrations Resistance 10 to 55 Hz (double amplitude of 1.5mm) Shock Resistance Misoperation 10m/s2 Endurance 1,000 m/s2 Weight Approximately 6g

FBR51, 52 SERIES MODEL Nominal Coil Must operate Thermal voltage resistance W1 contact (±10%) (at 20°C) voltage resistance FBR52ND06-W1 6 VDC 45 Ω 3.6 VDC (at 20°C)

4.5 VDC (at 85°C)

FBR52ND09-W1 9 VDC 100 Ω 5.4 VDC (at 20°C)

6.8 VDC (at 85°C)

65°C/W FBR52ND10-W1 10 VDC 135 Ω 6.3 VDC (at 20°C)

7.9 VDC (at 85°C)

FBR52ND12-W1 12 VDC 180 Ω 7.3 VDC (at 20°C)

9.2 VDC (at 85°C)

  1. FBR51 Series 2. FBR52 Series Model Nominal Voltage Coil resistance (±10%) (at 20ºC) Must operate voltage Thermal resistanceW 1 contact WL Contact WF contact FBR51ND06-W1 FBR51ND06-WL FBR51ND06-WF 6 VDC 60 3.6VDC (at 20ºC) 4.5VDC (at 80ºC) 73ºC/W FBR51ND09-W1 FBR51ND09-WL FBR51ND09-WF 9 VDC 135 5.4VDC (at 20ºC) 6.8VDC (at 80ºC) FBR51ND10-W1 FBR51ND10-WL FBR51ND10-WF 10 VDC 180 6.3VDC (at 20ºC) 7.9VDC (at 80ºC) FBR51ND12-W1 FBR51ND12-WL FBR51ND12-WF 12 VDC 240 7.3VDC (at 20ºC) 9.2VDC (at 80ºC)

FBR51, 52 SERIES n SUITABLE APPLICATIONS Recommended Normal load current model (example) Application (12 VDC system) Description For 16 V or less For instantaneous motor load voltage 20 V or more load voltage Power Windows 20 to 25 A forward and reverse FBR51Nn -W1 FBR52Nn -W1 (switching at motor locking) motor control Automatic Door Lock 18 to 25 A forward and reverse FBR51Nn -W1 FBR52Nn -W1 (switching at motor locking) motor control Tilt-Lock Wheel 20 A forward and reverse FBR51Nn -W1 FBR52Nn -W1 (switching at motor locking) motor control Sunroof 20 to 30 A forward and reverse FBR51N n -W1 FBR52N n -W1 (switching at motor locking) motor control Adjustable Door Mirror 3 to 5 A forward and reverse FBR51N n -W1 (switching at motor locking) motor control 8 to 12 A (INRUSH) forward and reverse Automatic Antenna break 2 A maximum motor control FBR51Nn -W1 (motor-free) Auto-Cruise 2 to 3 A power shutoff and solenoid FBR51N n-W1 Lamp loads 120 Watts for up to 100K operations FBR51N n-WL Others Car Audio System, etc. FBR51N n-W1

  • For the load condition where higher voltage would be encountered during contact break, FBR52 series with wider contact gap is recommended. n CHARACTERISTIC DATA 1. MAXIMUM BREAK CAPACITY 2. LIFE Voltage between contacts (VDC) Contact switching current (A) 2015 25 3530 40 50 Locked motor load Resistive load FBR51 FBR52FBR51 FBR52 Locked motor current (A)

14 VDC Motor locked load

30Number of operations (x104) 2015 25 3530 40 50 High power type (-W1)

FBR51, 52 SERIES 100101 100 (RL-1) 20 sec 20 A 0 A 20 A 0 A (RL-2) 0.3 sec 10 sec 0.3 sec 100101 1000 100 (measured at 6 V-1 A) 100101 100 100101 1000 100 (measured at 6 V-1 A) M N.O. N.C. 0 A 4 A 20 A 16 A M RL-1 RL-2 N.O. N.C. N.O. N.C. 3. LIFE TEST (EXAMPLE)

  • Test item

14 V DC-20 A

motor lock 200,000 operations minimum (FBR52 n-W1 type)

  • Test circuit
  • Current wave form
  • Shift of pick-up drop-out voltage
  • Shift of contact resistance PICK-UP Initial Percent of rated coil voltage (%) Number of operations (x104) Break Make Contact Resistance (mΩ) Initial DROP-OUT
  • Shift of pick-up and drop-out voltage No. of operations (x104) % of rated coil voltage 100101 100
  • Test item

14 V DC-25 A

200,000 operations minimum (FBR51 -W1 type)

  • Current wave form
  • Test circuit (RL-1) 20 sec 25 A 0 A 25 A 0 A (RL-2) 0.3 sec 10 sec 0.3 sec
  • Shift of contact resistance 100101 1000 100 Break Make (measured at 6 V-1 A) M RL-1 RL-2 N.O. N.C. N.O. N.C. PICK-UP DROP-OUT Contact resistance No. of operations (x104)

FBR51, 52 SERIES 10010 201 100 10010 201 1000 100 0 A 10 A 80 A N.O. 4. COIL TEMPERATURE RISE 5. OPERATING COIL VOLATGE RANGE (EXAMPLE) Coil temperature rise (°C) Applied time (minutes) 0 10 20 30 100 120 0.8 W at 20°C 0.6 W (2) carrying current : 10 A applied coil power 0.8 W 0.6 W (1)carrying current : 0 A applied coil power 0.8 W 0.6 W (3) carrying current : 20 A applied coil power –30 0 5 0 100 Applied voltage to the coil Operating temperature (°C) NOTE : Intermittent coil operation is required in this region at 20 A or more (V) CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE carrying current carrying current. Applied voltage to the coil Operating temperature (°C) NOTE : Intermittent coil operation is required in this region at 20 A or more –30 0 5 0 100 (V) CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE carrying current. [ FBR51ND09-n] [ FBR51ND12-n ]

  • Test item

14 V DC-80 A (120W)

lamp load 100,000 operations minimum (FBR51 n-WL type)

  • Test circuit
  • Current wave form
  • Shift of pick-up drop-out voltage
  • Shift of contact resistance Initial Percent of rated coil voltage (%) Number of operations (x104) Contact Resistance (mΩ) Initial PICK-UP DROP-OUT Number of operations (x104)

FBR51, 52 SERIES 6. VIBRATION RESISTANCE CHARACTERISTICS 7. SHOCK RESISTANCE CHARACTERISTICS FBR51 Y Z X Frequency : 10~2000 Hz Acceleration : 100 m/s2 max Direction of vibration : see under diagram Detection level : chatter > 100 µs Acceleration (m/s2) 100 10 50 100 500 1000 2000 5 1 0.5 0.1 0.01 Dual amplitude (mm) Frequency (Hz) Automotive electronics standard44 m/s2 Range where chattering occurs N.O. contact coil not energized on X-direction 200 400 600 800 1,000 X1 X2 Y1 Y2 Z1 Z2 Shock level (m/s2) Shock direction : N.C. contact (coil de-energized) Shock application time : 11 ms, half-sine wave Test material : coil, energized and de-energized Shock direction : set under diagram Detection level : chatter > 100 µs FBR51 : N.C. Contact (coil energized) n REFERENCE DATA FBR52 n = 100 Operate Release Distribution of operate and release voltage Nominal voltage multiplying factor (%) 0 10 20 30 40 50 60 70 80 Distribution (%) FBR52 n = 100 Operate Release Distribution of operate and release time Time (ms) 100 0 1 2 3 4 5 6 7 8 Distribution (%) Contact resistance (m ohm) Distribution of contact resistance FBR52 n = 100 100 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 00 Distribution (%)

FBR51, 52 SERIES n DIMENSIONS 45 pcs/tube 20.3 Max. 601 Max.  Dimensions 19.0 Max. 51ND12-W1 F&T 9427  PC board mounting hole layout (BOTTOM VIEW)  Schematics (BOTTOM VIEW)  Tube carrier Unit : mm 12.1+0.2 15.5+0.2 R0.4 R0.4 13.7+0.3 0.3 2.5 10.2 t = 0.4 1 (1.6) (1.05) 3.5 1.2 t = 0.3 5 4 5 4 N.C. N.O. (-) COM (+) FBR50-WL FBR50-W1 N.C. N.O. COM 4-O 1.3 O 1.4 10.22.5 Refer to the test circuit at CHARACTERISTIC DATA for connection, and polarity. Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://www.fujitsu.com/us/services/edevices/components/ Europe Fujitsu Components Europe B.V. Diamantlaan 25

2132 WV Hoofddorp

Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ Fujitsu Components International Headquarter Offices ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 4, 2008.