FB9205C PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

< Power supply for 95 - 230 V AC < Suitable for the supply of FOL, field products (analyzers, level meters etc.) < Installation in suitable enclosures in Zone 1 < Module can be exchanged under voltage (hot swap) < Use two power supplies for redundancy < Galvanic isolation to mains Function The power supply provides power for the I/O modules and com units mounted on the backplane. Input and output are galvanically isolated from each other (EN 60950-1). Connection Zone 1

0 V DC

24 V DC

23 V DC

Connection wired to Ex e terminals Rated voltage Ur 95 ... 230 V AC Power consumption max. 45 VA Inrush current 3.4 A (10 ms) Input Input frequency 50 ... 60 Hz Output Current 1.2 A Voltage 24 V DC +/- 3% (Connectors 5, 12)

23 V DC +/- 3% decoupled via diode (Connectors 5, 13)

date: 2020-04--

30 Date of

Release date: 2020-04-30 Date of issue: 2020-04-30 Filename: 205891_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

LED indicator LED green: supply Directive conformity Electromagnetic compatibility Directive 2014/30/EU EN 61326-1 Low voltage Directive 2006/95/EC EN 61010-1 Conformity Electromagnetic compatibility NE 21 Degree of protection IEC 60529 Environmental test EN 60068-2-14 Shock resistance EN 60068-2-27 Vibration resistance EN 60068-2-6 Damaging gas EN 60068-2-42 Relative humidity EN 60068-2-56 Ambient conditions Relative humidity 95 % non-condensing Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 (module) , a separate housing is required acc. to the system description Mass approx. 890 g Dimensions 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch) Data for application in connection with hazardous areas EU-Type Examination Certificate PTB 97 ATEX 1074 U Marking 1 II 2 G Ex d IIC Gb Galvanic isolation Output/power supply EN 60950-1 (safety requirement < 60 V) Directive conformity Directive 2014/34/EU EN 60079-0:2009 EN 60079-1:2007 EN 60079-11:2007 EN 60079-26:2007 EN 61241-11:2006 International approvals ATEX approval PTB 97 ATEX 1075 EAC approval Russia: RU C-IT.MIII06.B.00129 Marine approval Lloyd Register 15/20021 DNV GL Marine TAA0000034 American Bureau of Shipping T1450280/UN Bureau Veritas Marine 22449/B0 BV General information System information The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Power supply FB9205C Release date: 2020-04-30 Date of issue: 2020-04-30 Filename: 205891_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

LED green: Power supply Space for labelling Power supply FB9205C Release date: 2020-04-30 Date of issue: 2020-04-30 Filename: 205891_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091