FB1301B2 PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

< 2-channel < Inputs with plug-in Ex e terminals < Module can be exchanged under voltage (hot swap) < Installation in suitable enclosures in Zone 1 < Dry contact or NAMUR inputs < Galvanic isolation between channels and the bus < Positive or negative logic selectable < Simulation mode for service operations (forcing) < Line fault detection (LFD) < Permanently self-monitoring Function The device accepts digital input signals of NAMUR sensors or mechanical contacts from the hazardous area. Open and short circuit line faults are detected. The device is supplied with plug-in Ex e terminals and protective cover. The increased safety inputs are galvanically isolated from each other, the bus, and the power supply. Connection COM II I Zone 1 10 kΩ 1.5 kΩ 1+/4+ 2-/5- Technical Data Slots Occupied slots 1 Supply Connection backplane bus Rated voltage Ur 12 V DC , only in connection with the power supplies FB92** Power dissipation 0.65 W Power consumption 0.65 W Internal bus Connection backplane bus Interface manufacturer-specific bus to standard com unit Digital input Release date: 2021-11--

16 Date of

Release date: 2021-11-16 Date of issue: 2021-11-16 Filename: 238482_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Connection [2] volt-free contact Connection [3] active binary signal 24 V DC Connection channel I: 1+, 2/3-; channel II: 4+, 5/6- Rated values acc. to EN 60947-5-6 (NAMUR) Internal resistor Ri 1 kΩ Line fault detection can be switched on/off for each channel via configuration tool Connection mechanical switch with additional resistors (see connection diagram) proximity switches without additional wiring Short-circuit < 360 Ω Open-circuit < 0.35 mA Minimum pulse duration 20 ms Indicators/settings LED indication LED green: supply LED red: line fault, per channel LED yellow: signal (status), per channel Coding optional mechanical coding via front socket Directive conformity Electromagnetic compatibility Directive 2014/30/EU EN 61326-1:2013 Conformity Electromagnetic compatibility NE 21:2007 Degree of protection IEC 60529:2000 Environmental test EN 60068-2-14:2009 Shock resistance EN 60068-2-27:2009 Vibration resistance EN 60068-2-6:2008 Damaging gas EN 60068-2-42:2003 Relative humidity EN 60068-2-78:2001 Ambient conditions Relative humidity 95 % non-condensing Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 (module) , a separate housing is required acc. to the system description Connection Ex e spring terminal with protective cover Mass approx. 350 g Dimensions 28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch) Data for application in connection with hazardous areas EU-type examination certificate BVS 11 ATEX E 093 X Marking 1 II 2 G Ex db eb IIC T4 Galvanic isolation Input/power supply, internal bus safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V Directive conformity Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-7:2015+A1:2018 Digital Input FB1301B2 Release date: 2021-11-16 Date of issue: 2021-11-16 Filename: 238482_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

ATEX approval BVS 11 ATEX E 093X General information System information The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Assembly Front view LED green: Power supply Space for labelling LED red: Line fault LED yellow: Signal (status) Plug-in Ex e terminal Protective cover Socket for removable plug Digital Input FB1301B2 Release date: 2021-11-16 Date of issue: 2021-11-16 Filename: 238482_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091