FAW DIWELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
DANUBE http://www.danube.com.tw 2013/10/29
FEATURES
10W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-36V,18V-72V WIDE INPUT RANGE SHORT CIRCUIT PROTECTION REGULATED OUTPUT 100% BURN IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS Voltage Setpoint Accuracy +/-2% max Input Voltage Range 2:1 3:1 4:1 Input Range Temperature Coefficient +/-0.05%/°C Input Filter Pi Network Ripple & Noise(20MHz BW) 100mVp-p max Protection Fuse Recommended Line Regulation +/-0.5% max GENERAL SPECIFICATIONS Load Regulation +/-0.5% max Efficiency 70% min Minimum Load 10% of Full Load Isolation Voltage
1500 VDC min Standard Models
Short Circuit Protection Continuous 3000 VDC min Suffix “3K” Models Short Circuit Restart Automatic Isolation Resistance 10 ohms min Over Load Protection 180% Typ Isolation Capacitance 500pF max Transient Response 200uS max Switching Frequency 200 KHz min MTBF >342,000 Hours Weight 31.2g Typ ENVIRONMENTAL SPECIFICATIONS Case Material Six-Side Shielded Case Operating Temperature -25°C to +71°C Case Size 50.8mm*25.4mm*11.2mm Storage Temperature -55°C to +125°C Potting Material Epoxy(UL94-V0) Humidity 95% max Conducted Emissions EN55022 Class A Cooling Free-Air Convection Radiated Emissions EN55022 Class A REMOTE CONTROL Suffix “A” Models ON 2.5 to 5.5Vdc or open circuit OFF 0 to 0.8Vdc ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 °C UNLESS OTHERWISE NOTED. Measured with 1uF ceramic capacitor connect to the output pins. High Line to Low Line. Load Regulation is for output load current change from 10% to 100%. 1 500VDC for 10 seconds,3000VDC for 3 seconds. 25% Step Load Change. MIL -HDBK-217F @25°C , Ground Benign. FAW SERIES 10W WIDE INPUT RANGE
DANUBE http://www.danube.com.tw 2013/10/29 SELECTION GUIDE(1) 2:1 7W-10W OUTPUT INPUT7 CURRENT(mA) MODEL NUMBER INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) FULL LOAD NO LOAD EFF (%)8 CAPACITOR LOAD MAX. FAWS-1203.3(A)(-3K) 9-18 3.3 2400 891 30 74 2700uF FAWS-1205(A)(-3K) 9-18 5 2000 1068 30 78 2700uF FAWS-1209(A)(-3K) 9-18 9 1111 1046 30 80 2200uF FAWS-1212(A)(-3K) 9-18 12 830 1040 28 80 1800uF FAWS-1215(A)(-3K) 9-18 15 670 1020 28 81 1500uF FAWS-1224(A)(-3K) 9-18 24 416 1020 28 82 1000uF FAWS-2403.3(A)(-3K) 18-36 3.3 2400 434 16 76 2700uF FAWS-2405(A)(-3K) 18-36 5 2000 527 25 79 2700uF FAWS-2409(A)(-3K) 18-36 9 1111 523 20 80 2200uF FAWS-2412(A)(-3K) 18-36 12 830 508 22 82 1800uF FAWS-2415(A)(-3K) 18-36 15 670 502 30 83 1500uF FAWS-2424(A)(-3K) 18-36 24 416 515 28 81 1000uF FAWS-2442(A)(-3K) 18-36 42 238 527 15 79 560uF Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: FAW*-****A(PACKAGE “A” For REMOTE CONTROL) FAW*-*****-3K(Isolation Voltage For 3000VDC) NOMINAL INPUT VOLTAGE. NOMINAL INPUT VOLTAGE,FULL LOAD.
DANUBE http://www.danube.com.tw 2013/10/29 SELECTION GUIDE(2) 2:1 8W-10W OUTPUT INPUT9 CURRENT(mA) MODEL NUMBER INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) FULL LOAD NO LOAD EFF (%)10 CAPACITOR LOAD MAX. FAWS-4803.3(A)(-3K) 36-72 3.3 2400 217 20 76 1000uF FAWS-4805(A)(-3K) 36-72 5 2000 264 20 79 1000uF FAWS-4809(A)(-3K) 36-72 9 1111 254 20 80 470uF FAWS-4812(A)(-3K) 36-72 12 830 254 20 82 330uF FAWS-4815(A)(-3K) 36-72 15 670 254 20 82 330uF FAWS-4824(A)(-3K) 36-72 24 416 264 20 82 330uF Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: FAW*-****A(PACKAGE “A” For REMOTE CONTROL) FAW*-*****-3K(Isolation Voltage For 3000VDC) NOMINAL INPUT VOLTAGE. NOMINAL INPUT VOLTAGE,FULL LOAD.
DANUBE http://www.danube.com.tw 2013/10/29 SELECTION GUIDE(3) 3:1 8W-10W OUTPUT INPUT11 CURRENT(mA) MODEL NUMBER INPUT VOLTAGE (VDC) OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (mA) FULL LOAD NO LOAD EFF (%)12 CAPACITOR LOAD MAX. FAWS-1203.3G(A)(-3K) 9-27 3.3 2400 880 40 76 2700uF FAWS-1205G(A)(-3K) 9-27 5 2000 1082 40 77 2700uF FAWS-1209G(A)(-3K) 9-27 9 1111 1065 40 78 2200uF FAWS-1212G(A)(-3K) 9-27 12 830 1054 40 79 1800uF FAWS-1215G(A)(-3K) 9-27 15 670 1041 40 80 1500uF FAWS-1224G(A)(-3K) 9-27 24 417 1057 40 79 1000uF FAWS-2403.3G(A)(-3K) 18-54 3.3 2400 434 20 76 2700uF FAWS-2405G(A)(-3K) 18-54 5 2000 527 20 79 2700uF FAWS-2409G(A)(-3K) 18-54 9 1111 515 20 81 2200uF FAWS-2412G(A)(-3K) 18-54 12 830 520 20 80 1800uF FAWS-2415G(A)(-3K) 18-54 15 670 514 20 81 1500uF FAWS-2424G(A)(-3K) 18-54 24 416 510 20 81 1000uF Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: FAWS-1005A(PACKAGE “A1” For REMOTE CONTROL) FAW*-****A(PACKAGE “A” For REMOTE CONTROL) FAW*-*****-3K(Isolation Voltage For 3000VDC) NOMINAL INPUT VOLTAGE. NOMINAL INPUT VOLTAGE,FULL LOAD.
DANUBE http://www.danube.com.tw 2013/10/29 SELECTION GUIDE(4) 4:1 8W-10W OUTPUT INPUT13 CURRENT(mA) MODEL NUMBER INPUT VOLTAGE (VDC) OUTPUT VOLTAG E (VDC) OUTPUT CURRENT (mA) FULL LOAD NO LOAD EFF (%)14 CAPACITOR LOAD MAX. FAWS-1203.3T(A)(-3K) 9-36 3.3 2400 880 40 76 2700uF FAWS-1205T(A)(-3K) 9-36 5 2000 1082 40 77 2700uF FAWS-1209T(A)(-3K) 9-36 9 1111 1065 40 78 2200uF FAWS-1212T(A)(-3K) 9-36 12 830 1054 40 79 1800uF FAWS-1215T(A)(-3K) 9-36 15 670 1041 40 80 1500uF FAWS-1224T(A)(-3K) 9-36 24 417 1057 40 79 1000uF FAWS-2403.3T(A)(-3K) 18-72 3.3 2400 434 20 76 2700uF FAWS-2405T(A)(-3K) 18-72 5 2000 527 20 79 2700uF FAWS-2409T(A)(-3K) 18-72 9 1111 515 20 81 2200uF FAWS-2412T(A)(-3K) 18-72 12 830 520 20 80 1800uF FAWS-2415T(A)(-3K) 18-72 15 670 514 20 81 1500uF FAWS-2424T(A)(-3K) 18-72 24 417 510 20 81 1000uF Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: FAW*-****A(PACKAGE “A” For REMOTE CONTROL) FAW*-*****-3K(Isolation Voltage For 3000VDC) NOMINAL INPUT VOLTAGE. NOMINAL INPUT VO LTAGE,FULL LOAD.
DANUBE http://www.danube.com.tw 2013/10/29 MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout
4 NO PIN Common
NOTE: Pin Size is Tolerance 1.0Φ ±0.10mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.80mm GRID : 2.54mm TOP VIEW MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS REMOTE CONTROL (Standard Models) PACKAGE ”A” PIN SINGLE DUAL 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout
6 Remote ON/OFF
NOTE: Pin Size is Tolerance 1.00Φ ±0.10mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.80mm
DANUBE http://www.danube.com.tw 2013/10/29 MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS REMOTE CONTROL (Specially Models) PACKAGE ”A1” PIN SINGLE 1 +Vin 2 -Vin 3 +Vout
4 NO PIN
All dimensions are in millimeters[inches] 50.8[2.00] 2 4 5.8[0.23] 7.62[0.30] 11.27[0.44] 20.4[0.80] SIDE VIEW 25.4[1.00]BOTTOM VIEW NOTE: Pin Size is Tolerance 1.00Φ ±0.10mm All Dimensions In mm(Inches) Tolerance .X or .XX= ±0.80mm TYPICAL APPLICATIONS SINGLE OUTPUT DUAL OUTPUT LOAD INPUT +Vin OUTPUT -Vout +Vout -Vin DC-DC CONVERTER +Vout -Vin -Vout INPUT DC-DC CONVERTER +Vin LOAD1 OUTPUT Common LOAD2 SIMPLIFIED SCHEMATIC SINGLE OUTPUT DUAL OUTPUT -Vin +Vin +Vout -Vout REFERENCE ERROR AMP ISOLATIONPWM CONTROLLER -Vin +Vin +Vout -Vout REFERENCE ERROR AMP ISOLATIONPWM CONTROLLER Common
DANUBE http://www.danube.com.tw 2013/10/29 TYPICAL PERFORMANCE CURVES Specifications typical at Ta=25 OC, nominal input voltage , rated output current unless otherwise specified. OUTPUT LOAD VS EFFICIENCY TEMPERATURE DERATING 0.0 20.0 40.0 60.0 80.0 0 20 40 60 80 100 % OF RATED LOAD(%) EFFICIENCY(%) 0.0 2.0 4.0 6.0 8.0 10.0 -25 0 25 50 70 90 TA(degree C) OUTPUT POWER(W) INPUT FUSE SELECTION GUIDE 4.7-7.25V INPUT VOLTAGE(VDC) 9-18V or 9-27V or 9-36V INPUT VOLTAGE(VDC) 18-36V or 18-54V or 18-72V INPUT VOLTAGE(VDC) 36-72V INPUT VOLTAGE(VDC) 3800mA Slow-Blow Type 2000mA Slow-Blow Type 900mA Slow-Blow Type 450mA Slow-Blow Type DC-DC CONVERTER +Vin -Vin +Vout -Vout OUTPUT Fuse INPUT Note: Certain applications may require the installation of external fuse in front of the input. FAW SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: No external capacitance is required for operation of the FAW series. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5 ohm from DC to 220KHz is required. External output capacitance is not required for operation, however it is recommended that 10uF tantalum and 0.1uF ceramic capacitance be selected for reduced system noise. Additional output capacitance may be added for increased filtering, but should not exceed 1000uF. We Can Offer EMC-Filter According To EN55011/22 Class B. Negative Outputs: A negative output vol tage may be obtained by connecting the +OUT to circuit ground and connecting –OUT as the negative output. FOR MORE INFORMATION CALL: Danube Enterprise Co., Ltd. Tel: 886-7-3755165 Fax: 886-7-3755330 E-mail: danube@ms10.hinet.net Home Page http://www.danube.com.tw SAFE OPERATING AREA
http:// www.diwell.com Additional Information : 한국 총판점 : ㈜디웰전자 (Diwell Electronics Co., Ltd.) Phone : 070-8235-0820 (+82-70-8235-0820) Fax : 031-429-0821 (+82-31-429-0821) Homepage: http:// www.diwell.com http:// www.diwellshop.com 기술 및 구매 문의 email : expoeb2@diwell.com dsjeong@diwell.com