FAA01 CARLOGAVAZZI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Specifications are subject to change without notice (21.03.08) 1 Product Description Ordering Key Delay on Operate Delay on operate timer with 4 functions and selectable time ranges from 0.05 sec- onds to 300 hours. Housing 48 x 48 mm for front panel mounting and on 8-pin or 11-pin socket.
- Time range 0.05 s to 300 h
- Knob selection of time range
- Knob adjustable time setting
- Knob selection of operating mode (4 functions): Op - delay on operate R - symmetrical recycler ON first In - interval Sh - one shot
- Automatic start
- Repeatability: ±0.2% on full scale
- Output: 8 A DPDT relay
- 48 x 48 mm housing for front panel mounting
- 8 or 11 pin socket
- LED indication for relay status and power supply ON Type Selection FAA 01 D W24 Housing Function Type Item number Output Power supply Mounting Output Plug Supply: 12 to 240 VAC/DC Front or socket DPDT 11-pin FAA01DW24 Front or socket DPDT 8-pin FAA08DW24 Time Specifications Time ranges Knob selectable Full scale 12 0.02 to 1.2s 0.2 to 12s 2 to 120s 0.2 to 12min 2 to 120min 0.2 to 12h 2 to 120h Full scale 30 0.05 to 3s 0.5 to 30s 5 to 300s 0.5 to 30min 5 to 300min 0.5 to 30h 5 to 300h Types FAA01, FAA08 Timers Output DPDT relay Rated insulation voltage 250 VAC Contact ratings (AgSnO2)µ Resistive loads AC 1 8 A @ 250 VAC DC 12 5 A @ 24 VDC Small inductive loads AC 15 2.5 A @ 250 VAC DC 13 2.5 A @ 24 VDC Mechanical life ≥ 30 x 106 operations Output Specifications Setting accuracy ± 5% on full scale ± 50 ms Repeatability ± 0.2% on full scale or ± 200 ms Time variation Within rated power supply ≤ 0.05% /V Within ambient temperature ≤ 0.2% /°C Reset Power supply interruption >100 ms Note When the time knob is below “0” the output activates instantaneously Electrical life ≥ 105 operations (at 8 A, 250 V, cos ϕ = 1) Operating frequency ≤ 3600 operations/h Dielectric strength Dielectric voltage ≥ 2 kVAC (rms) Rated impulse withstand volt. 4 kV (1.2/50 µs)
2 Specifications are subject to change without notice (21.03.08) FAA01, FAA08 Function and Time Setting Mode of Operation Function Op Delay on operate The set delay period begins as soon as the power supply is connected. At the end of the set delay the r elay oper- ates and doesn’t release until the power supply is interrupted for at least 100 ms. Function R Symmetrical recycler (ON first) The relay operates and the time period star t as soon as the power is applied. At the end of the first set time peri- od, the relay releases. At the end of the second time peri - od (equal to the first), the relay operates again. This sequence continues with equal ON- and OFF- time periods until the power sup - ply is interrupted for at least 100 ms. Function In Interval The relay operates and the time period begins as soon as the power is applied. The relay releases at the end of the time period or when the power supply is disconnect - ed for at least 100 ms. Function Sh One shot The time period begins as soon as the power supply is connected and at the end of this period the relay operates for 1s. Indication for Power supply On LED, green Output ON LED, yellow (flashing when timing) Environment Degree of protection IP 50 (front panel) Operating temperature -10 to +55 °C, R.H. < 85% Storage temperature -10 to +55 °C, R.H. < 85% Housing Dimensions 48 x 48 mm Material PA66 Weight Approx. 95 g Approvals UL, CSA CE marking Yes EMC Electromagnetic Compatibillity Immunity According to EN 61000-6-2 Emission According to EN 61000-6-3 Timer specifications According to EN 61812-1 General Specifications Lower left knob: Setting of function Op - delay on operate R - simmetrical recycler In - interval Sh - one shot Lower right knob: Time unit selector 0.1sec (0.1 seconds) sec (seconds) 10sec (10 seconds) min (minutes) 10m (10 minutes) hrs (hours) 10h (10 hours) Upper right knob: Time range selector 12 or 30 Centre knob: Time setting on absolute scale Power Supply Overvoltage cat II Rated operational voltage (IEC 60947-1) through terminals: (FAA01DW24) 2, 10 12 to 240 VDC + 10% - 15% 12 to 240 VAC + 10% -15%, 45 to 65 Hz (FAA08DW24) 2, 7 12 to 240 VDC + 10% - 15% 12 to 240 VAC + 10% -15%, 45 to 65 Hz Power consumption Rated operational power AC 3 VA DC 1.5 W Supply Specifications
Specifications are subject to change without notice (21.03.08) 3 FAA01, FAA08 Operating Diagrams T T Power□supply LED□“POWER” Relay Function In - Interval T T 1s±0.6s 1s±0.6s Power□supply LED□“POWER” Relay Function Sh - One Shot T T TT T Power□supply LED□“POWER” Relay Power□supply T LED□“POWER” Relay T Function Op - Delay ON operate Function R - Symmetrical Recycler (ON first) Range and operation mode selection Operating mode display window Operating mode selector (function Op, R, In, Sh) Scale range display windows Time unit selector (0.1s, sec, 10sec, min, etc.) Time setting knob (set time) Power indicator (green) Time range selector 12 and 30 at full scale Output indicator (yellow) (Flashes when timer operates; on when timer stops operating) Time unit display window
4 Specifications are subject to change without notice (21.03.08) FAA01, FAA08 Wiring Diagrams L(+) N(-) µ µ 1 11 4 83 9 FAA01 L(+) N(-) µ µ 1 8 4 53 6