F14326 CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 35

Technical content

Product Number F14326_JENNY-8X1-T4 Family Jenny Type Lens Color clear Diameter 35 + 280 mm Height 17,02 mm Style rectang Optic Material Silicone Holder Material Fastening pin, glue Status production ready ROHS Comliant Yes Date Updated 19/04/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V10 Gen6 asymmetric degStreetligh...93 % 0.460 - V10 Gen7 sim: AsymmetricStreetligh...sim: 94 %sim: 0.450 - CLL02x/CLU02x (LES10) asymmetric degStreetligh...93 % 0.460 - CXA/B 15xx Asymmetric degStreetligh...94 % 0.480 - MK-R asymmetric degStreetligh...93 % 0.560 - XM-L EZW asymmetric degStreetligh...93 % 0.680 - MX-6 asymmetric degStreetligh...92 % 0.610 - XHP70 asymmetric degStreetligh...91 % 0.500 - LUXEON M/MX asymmetric degStreetligh...94 % 0.660 - CXM-9 asymmetric degStreetligh...93 % 0.460 - Soleriq P9 asymmetric degStreetligh...94 % 0.470 - Duris P10 sim: AsymmetricStreetligh...sim: 92 %sim: 0.557 - MJT COB LES 6 Asymmetric degStreetligh...92 % 0.540 - SLE G5 LES6 Asymmetric degStreetligh...93 % 0.600 - SLE G5 LES11 Asymmetric degStreetligh...92 % 0.460 - May 29th 2017 5:01 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10

24240 SALO, Finland

http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001

D E C F B G A H Tolerances if not otherwise shown According to DIN ISO 2768-1 SCALE 1:1 WEIGHT SHEET 1/1 SIZE DRAWING TITLE F14326_JENNY-8X1-T4 PART NUMBER F14326 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. INDEX PART NO DESCRIPTION MATERIAL COLOUR

1 F14326 JENNY-8X1-T4 Optical grade silicon

  1. 7 c/c LED POSITION When thermal adhesive tape is used, recommended tape thickness up to 0.3mm. When assembling led ensure correct position in relation to lens position pin hole. Position pin 17.0 2 29.8 5 Front view Bottom view Wire outlet (x16) A 280 3535353535353535 3.5 Top view Cutting option from 8x1 up to single. Asymmetric light direction shown by arrow. 3512. 7 3.2 25. 4 c/c 9.6 c/c Detail A Led center location Isometric view Linear measures: class V Please note that due to the elasticity of products made of silicone actual measured values may vary, and therefore typical tolerance values may not be applied.

NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.