F13700 CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Product Number F13700_BARBARA-S-PF Family Barbara Type Reflector Color metal Diameter 70 mm Height 41,7 mm Style round Optic Material PC Holder Material Fastening pin Status production ready ROHS Comliant Yes Date Updated 3/04/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO10 sim: 13 Spot - sim: 0.000 - VERO13 sim: 15 Spot - sim: 0.000 - VERO18 sim: 21 Spot - sim: 0.000 - CXA/B 15xx sim: 12 Spot - sim: 0.000 - May 25th 2017 4:26 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10
24240 SALO, Finland
http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001
D E C F B G A H Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L SCALE 1:1 WEIGHT (g) SHEET 1/1 SIZE DRAWING TITLE Datasheet_BARBARA-PF PART NUMBER Ledil Oy Salorankatu 10 FIN 24240 SALO Finland THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." This drawing applies to: C13700_BARBARA-S-PF C13701_BARBARA-W-PF C13702_BARBARA-WW-PF C13703_BARBARA-XW-PF 62.1 Top view 41.61 1.25 0.66 Front view 66.87 22.16 Bottom view A Isometric view 3.4 2.09 Detail A Scale: 4:1
NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.