F10067-102 RHOPOINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
MATERIAL: Metallized Polypropylene capacitors in non-inductive construction. LEADS: Tinned Copper soldered to capacitor with 63-37 Sn-Pb TEMPERATURE RANGE: May be operated at rated voltage from -55°C to + 85°C. Voltage must be de- rated linearly to 60% between +85°C to +105°C. ELECTRICAL [NON-DESTRUCTIVE] TESTS: 1. Capacitance shall be measured at 1 KHz. ± 20 Hz and + 25°C for values up to 1.0 MFD. Values greater than 1.0 MFD. shall be measured at 120 Hz. ± 10 Hz. Ref: MIL-STD-202E, method 305. 2. Dissipation Factor shall be measured as described for capacitance and shall not exceed 0.2%. 3. Insulation Resistance shall be measured at rated voltage. After 2 minutes under voltage, minimum values shall be 200,000 MEG/MFD., need not exceed 400,000 megohms. Ref: MIL-STD-202E, method 302. 4. Dielectric Strength: Capacitors shall withstand specified DC test potential for 60 seconds through a limiting resistance of 1 ohm/volt. Terminal to terminal will be 150% of rated voltage. TerminaI to case will be 200 % of rated voltage.. Ref: MIL-STD-202E, method 301. 5. Dielectric Absorption shall not exceed 0.1% when tested to MIL-C-19978D. Ref: MIL-C-19978D, paragraph 3.22. TYPICAL TEMPERATURE CHARACTERISTICS Page 1 of 4F10067 Series RHOPOINT COMPONENTS LTD Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255
P/N CAPACITANCE Dia (in.) Length (in.) Lead (awg) LeadDia F10067-102 .001 MFD 0.32 0.48 #24 0.020 F10067-122 .0012 MFD 0.32 0.48 #24 0.020 F10067-152 .0015 MFD 0.32 0.48 #24 0.020 F10067-182 .0018 MFD 0.32 0.48 #24 0.020 F10067-222 .0022 MFD 0.32 0.48 #24 0.020 F10067-272 .0027 MFD 0.32 0.48 #24 0.020 F10067-332 .0033 MFD 0.32 0.48 #24 0.020 F10067-392 .0039 MFD 0.32 0.48 #24 0.020 F10067-472 .0047 MFD 0.32 0.60 #24 0.020 F10067-562 .0056 MFD 0.32 0.60 #24 0.020 F10067-682 .0068 MFD 0.32 0.60 #24 0.020 F10067-822 .0082 MFD 0.32 0.60 #24 0.020 F10067-103 .010 MFD 0.32 0.60 #24 0.020 F10067-123 .012 MFD 0.34 0.60 #24 0.020 F10067-153 .015 MFD 0.36 0.60 #24 0.020 F10067-183 .018 MFD 0.40 0.60 #24 0.020 F10067-223 .022 MFD 0.40 0.60 #24 0.020 F10067-273 .027 MFD 0.42 0.60 #24 0.020 F10067-333 .033 MFD 0.46 0.60 #24 0.020 F10067-393 .039 MFD 0.48 0.60 #24 0.020 F10067-473 .047 MFD 0.48 0.73 #22 0.025 F10067-563 .056 MFD 0.48 0.73 #22 0.025 F10067-683 .068 MFD 0.52 0.73 #22 0.025 F10067-823 .082 MFD 0.50 0.73 #22 0.025 Last character on Part No. indicates tolerance: K- ±10%, J - ±5%, G - ±2%, F - ±1% Custom values obtainable, notify factory for suggestions. Page 2 of 4F10067 Series RHOPOINT COMPONENTS LTD Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255
Last character on Part No. indicates tolerance: K- ±10%, J - ±5%, G - ±2%, F - ±1% Custom values obtainable, notify factory for suggestions. P/N CAPACITANCE Dia (in.) Length (in.) Lead (awg) Lead Dia F10067-104 .10 MFD 0.40 0.73 #22 0.025 F10067-124 .12 MFD 0.42 0.73 #22 0.025 F10067-154 .15 MFD 0.45 0.73 #22 0.025 F10067-184 .18 MFD 0.48 0.73 #22 0.025 F10067-224 .22 MFD 0.38 0.84 #22 0.025 F10067-274 .27 MFD 0.40 0.84 #22 0.025 F10067-334 .33 MFD 0.44 0.84 #22 0.025 F10067-394 .39 MFD 0.46 0.84 #22 0.025 F10067-474 .47 MFD 0.52 0.84 #22 0.025 F10067-564 .56 MFD 0.54 0.84 #22 0.025 F10067-684 .68 MFD 0.60 0.84 #22 0.025 F10067-824 .82 MFD 0.64 0.84 #22 0.025 F10067-105 1.0 MFD 0.70 0.84 #22 0.025 F10067-125 1.2 MFD 0.68 0.98 #20 0.031 F10067-155 1.5 MFD 0.75 0.98 #20 0.031 F10067-185 1.8 MFD 0.80 0.98 #20 0.031 F10067-205 2.0 MFD 0.85 0.98 #20 0.031 F10067-225 2.2 MFD 0.90 0.98 #20 0.031 F10067-255 2.5 MFD 0.88 1.10 #20 0.031 F10067-275 2.7 MFD 0.90 1.10 #20 0.031 F10067-305 3.0 MFD 0.94 1.10 #20 0.031 F10067-335 3.3 MFD 1.00 1.10 #20 0.031 F10067-357 3.5 MFD 1.02 1.10 #20 0.031 F10067-375 3.7 MFD 0.96 1.28 #20 0.031 Page 3 of 4F10067 Series RHOPOINT COMPONENTS LTD Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255
P/N CAPACITANCE Dia (in.) Length (in.) Lead (awg) Lead Dia F10067-405 4.0 MFD 1.00 1.30 #20 0.031 F10067-475 4.7 MFD 1.10 1.30 #20 0.031 F10067-505 5.0 MFD 1.12 1.30 #20 0.031 F10067-565 5.6 MFD 1.04 1.55 #20 0.031 F10067-605 6.0 MFD 1.08 1.55 #20 0.031 F10067-655 6.5 MFD 1.10 1.55 #20 0.031 F10067-705 7.0 MFD 1.15 1.55 #20 0.031 F10067-755 7.5 MFD 1.20 1.55 #20 0.031 F10067-805 8.0 MFD 1.25 1.55 #20 0.031 F10067-855 8.5 MFD 1.28 1.55 #20 0.031 F10067-905 9.0 MFD 1.25 1.68 #20 0.031 F10067-955 9.5 MFD 1.28 1.68 #20 0.031 F10067-106 10.0 MFD 1.30 1.68 #18 0.040 F10067-116 11.0 MFD 1.36 1.68 #18 0.040 F10067-126 12.0 MFD 1.42 1.68 #18 0.040 F10067-136 13.0 MFD 1.46 1.68 #18 0.040 F10067-146 14.0 MFD 1.50 1.68 #18 0.040 F10067-156 15.0 MFD 1.50 1.80 #18 0.040 F10067-166 16.0 MFD 1.54 1.80 #18 0.040 F10067-186 18.0 MFD 1.64 1.80 #18 0.040 F10067-206 20.0 MFD 1.72 1.80 #18 0.040 F10067-256 25.0 MFD 1.82 1.92 #18 0.040 F10067-306 30.0 MFD 1.92 2.06 #18 0.040 F10067-356 35.0 MFD 2.06 2.06 #18 0.040 Last character on Part No. indicates tolerance: K- ±10%, J - ±5%, G - ±2%, F - ±1% Custom values obtainable, notify factory for suggestions. Rhopoint Components Ltd Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255 Germany +49 (0) 692 199 8606 Fax: +49 (0) 692 199 8595 Email: sales@rhopointcomponents.com Website: www.rhopointcomponents.com Page 4 of 4F10067 Series RHOPOINT COMPONENTS LTD Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255