9001 RHOPOINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
H HH HHIGH IGHIGH IGHIGH P P P P PERFORMANCE ERFORMANCEERFORMANCE ERFORMANCEERFORMANCE SIP R SIP R SIP R SIP R SIP R EED EEDEED EEDEED R R R R RELAYS ELAYSELAYS ELAYSELAYS The SIP relay is the industry standard when high reliability and consistent performance are desired in a compact package. The 9001 and 9002 are high performance relays ideally suited for Automatic Test Equipment, Instrumentation, RF, and Telecommunications applications. The 9091 is a compact version of the 9001. It offers many of the same features of the larger package while using 40% less board space. The specification tables allow you to select the appropriate relay for your application. S SS SSERIES ERIESERIES ERIESERIES F F F F FEATURES EATURESEATURES EATURESEATURES u High Insulation Resistance - 1012 Ω minimum. (1013 Ω typical) Ê High reliability, hermetically sealed contacts for long life. Tested to 1 Billion Operations. Ê High dielectric strength available, consult factory. Ê High speed switching compared to electromechanical relays. Ê Molded thermoset body on integral lead frame design. Ê Coaxial Shield for 50 Ω impedance and switching of fast rise time digital pulses - 9002 only. Ê Optional Coil Suppression Diode - protects coil drive circuits. Ê UL File # E-67117, CSA File # LR 28537
9000 Series / Molded SIP Reed Relays
Dimensions in Inches (Millimeters) 30o
COTO TECHNOLOGY RHOPOINT COMPONENTS LTD Holland Rd, Hurst Green, Oxted, Surrey, RH8 9AX,ENGLAND Model Number 9001 9002 9091 Parameters Test Conditions Units 4 Pin SIP 6 Pin SIP 1 Form A COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 12 Coil Resistance +/- 10%, 25° C Ω 500 1000 350 750 500 1000 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 10 Life Expectancy-Typical Signal Level 1.0V, 1.0mA x 106 Ops. 1000 1000 500 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.150 0.150 0.125 Dynamic Contact Resistance (max. init. ) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.200 0.200 0.150 RELAY SPECIFICATIONS Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH Ω x 10 x 10 x 10 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.7 0.8 0.1 0.1 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.4 1.4 0.5 2.0 Contact to Shield Contacts Open, Shield Floating pF - 1.4 - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 300 1500 300 1500 1500 200 1500 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.35 0.35 0.50 Release Time - Typical Zener-Diode Suppression Diode Suppression msec. 0.10 0.10 0.30 0.12 Notes: 1Consult factory for life expectancy at other switching loads. 9090 series contact resistance >0.5W defines end of life or failure to open. 2Optional diode is connected to pin #2 (+) and pin #3(-). Correct coil polarity must be observed. 39000 series part numbers designated with Form B contacts, these relays contain bias magnets. Correct coil polarity must be observed. 4Consists of 20V Zener-diode and 1N1002 diode in series, connected in parallel with coil. Storage Temp:-35°C to +100°C; Operating Temp:-20°C to +85°C Solder Temp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s Top View: Dot stamped on relay refers to pin #1 Grid = .1"x.1" (2.54mm x 2.54mm) 222