EVNDXA

EVN-DJAA03B14 PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Carbon Composition Trimmer Po ten ti om e ters/EVND – EV22 – E Product Code Str ucture Material Special Knob Trims & Knob Length Taper & Resistance V N D 4 56 A O B 10 11 12 Note : R=Nominal Total Resistance Electrical Specifi cations Nominal Total Resistance 1 k/L50529, 2 k/L50529, 5 k/L50529, 10 k/L50529, 20 k/L50529, 50 k/L50529, 100 k/L50529, 200 k/L50529, 500 k/L50529, 1 M/L50529 Taper B Rating R<500 k/L50529 : 0.1 W 50 V (50 °C) R>500 k/L50529 : 0.1 W 25 V (50 °C) Residual Resistance 1 k/L50529<R<2 k/L50529 : 60 /L50529 max. 2 k/L50529<R <1 M/L50529 : 3 % max., or 200 /L50529 max. whichever smaller Mechanical Specifi cations Rotation Angle 210 °±20 ° Rotation Torque 2 mN·m to 25 mN·m Stopper Strength Surf ace : 75 mN·m, reverse side : 35 mN·m Endurance Operating Li fe 100 cycles Resistance to Sold ering Heat 240 °C to 280 °C : 5 s max., 280 °C to 300 °C : 3 s max. Resistance to Damp After 350 hours : R <100 k/L50529+15 % −0 %, : 100 k /L50529<R <1 M/L50529+20 % −0 % Endurance under Damp After 350 hours : 1.5 h ON 0.5 h OFF : 100 k /L50529<R <1 M/L50529±20 % Endurance under High Temperature 70 °C±3 °C Afte r 250 hours +5 %, −15 % Minimum Quantity/Packing Unit EVND2A, EVND8A : 500 pcs. Polyethylene Bag (Bulk) EVNDJA, EVNDXA, EVNDCA : 1000 pcs. Radial Taping (Reel Pack) Quantity/Carton EVND2A, EVND8A : 5000 pcs. EVNDJA, EVNDXA, EVNDCA : 10000 pcs. 6FE Square Trimmer Potentiometers Type: EVND ■ Features

• Top-adjust or side-adjust available
• Radial taping supported
• High reliability (dustproof construction) ■ Recommended Ap pli ca tions
• Audio Visual Equipment, Home Electrical Ap pli anc es ■ Explanation of Part Numbers ■ Specifi cations Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Carbon Composition Trimmer Po ten ti om e ters/EVND – EV23 – 6.4 0.6 0.75 0.75 4.65 4.5 1.2 φ3.2 2.5 2.5 0.8±0.1 3-0.8±0.1 #1 #3#2 Marking 2.5 5.0 1.7 3.8 0.4 1.85 Mounting surface Adjusting direction PWB mounting hole for reference (Pitch tolerance: ±0.1) View from mounting side 3-φ1.0 0.1 #1 #3 CW Circuit diagram 6.4 6.35 5.0±0.2 0.75 3.5 0.6 3.2 φ3.2 #1 #3 Marking 0.8±0.1 1.2 Mounting surface 0.75 0.3 3.5±0.5 1.7 3-0.8±0.1 5.0 5.0 3-φ1.0 0.1 #1 #3 CW Circuit diagram PWB mounting hole for reference (Pitch tolerance: ±0.1) View from mounting side ■ Dimensions in mm (not to scale) Knob color Orange yellow No. 1 No. 2 Knob color Orange yellow Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Carbon Composition Trimmer Po ten ti om e ters/EVND – EV24 – 6.4 12.7±1.0 21.0±0.5 1.3 max. 1.3 max. 5.00±0.05 0.6 0.3±0.1 (φ2.5) Resistance φ3.2 3.2 3.5 1.6 max. 2-0.85 0.8+0.1 #1 #3 1.2 (1.2) 6.35 2–1.0±0.5 2-0.5 0.1 2-φ1.0 0.1 18.0 1.0 0.5 φ1.3 0.1 3.00±0.05 (0.25) 3 max. 9.0±0.5 1 max. 1 max. 0.25 Mounting surface 3.0±0.3 0.3±0.1 (1.7) PWB mounting hole for reference 3.85±0.700.8 05.0 4.4 min. φ4.0±0.3 CW #1 #3 The pattern foil of PWB shall not be in this dotted square area. AA 0.6±0.3 6.0±0.5 1.5 max. 0.8±0.1 Adhesive tape shall not be over from base paper. A – SectionA 2 max. Circuit diagram #1 #3

6.4 Resistance

Mounting surface Adhesive tape shall not be over from base paper. Adhesive tape φ3.2 2-0.85 0.8±0.1 3.0±0.3 2-0.5 0.1 0.6 φ2–1.0 0.1 φ1.3 0.1 + 3.0 0.5 0.2 18.0 1.0 0.5 (φ2.5) (0.25) 5.00±0.05 1.6 max. 12.7±1.0 6.0±0.5 9.0±0.5 2 max. 1.3 max.1.3 max. 1.2 0.5 0.3 (0.25) (11) (1.7) 6.35±0.30 0.3±0.1 20.0±0.5 Circuit diagram CW #1 #3 5.0±0.8 3.85±0.70 A φ4.0±0.3 A A – SectionA EIAJ RC-1008 shall be applied to items not specified here. The pattern foil of PWB shall not be in this dotted square area. PWB mounting hole for reference View from mounting side 3.00±0.05 1m ax. 1 max. 0.6±0.3 1.5 max. 2.50±0.05 5.00±0.05 0.8±0.1 2.2 5.0±0.83.85±0.70 6.35±1.30 1.3 max. 1.3 max. 12.7±1.0 6.4 1.7 (2.05) 1m ax. 1 max.3.4 6.8 3.4 12.7±0.3 20.0±0.5 0.9 Resistance Circuit diagram CW #1 #3 0.8±0.1 Mounting surface AA 6.0±0.5 9.0±0.5 2 max. 0.6±0.3 1.5 max. A – A Adhesive tape shall not beo v e rfrom base paper. φ40±0.3 φ3.2 (1.95)3 0.3 (0.5) 0.9 2.50 ±0.35 0.3 4.5 (1.95) PWB mounting hole for reference View from mounting side Adhesive tape 18.0 1.0 0.5 0.5 0.1 φ1.3 0.1 φ2-1.0 0.1 Section No. 3 No. 4 No. 5 ■ Radial Taping Prod ucts Knob color Orange yellow Knob color Orange yellow Knob color Orange yellow Oct. 201200