EVK-M101 U-BLOX | Alldatasheet

Document overview

  • PDF pages: 1

Technical content

u-blox M10 GNSS evaluation kit Highlights

  • Easy-to-use kit including antenna, cabling and software package for evaluation of all u-blox M10 GNSS features
  • Rugged housing with pin-header for full access to all I/O ports of the u-blox M10 chip
  • On-board power consumption sensors Kit includes
  • EVK-M101
  • Type-C USB cable
  • Active GNSS L1 band antenna with 3 m cable Documentation Visit www.u-blox.com/product/evk-m10 to find related documentation. System requirements
  • PC with USB interface
  • Operating systems: Windows 7 onwards (x86 and x64 versions) Product variants EVK-M101 u-blox M10 GNSS evaluation kit with UBX-M10050-KB chip and TCXO oscillator EVK-M101C u-blox M10 GNSS evaluation kit with UBX-M10050-KB chip and crystal oscillator Product summary UBX-20017985 - R05 Legal Notice: u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this doc- ument or any part thereof without the express permission of u-blox is strictly prohibited. The information contained herein is provided “as is”. No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by u-blox at any time. For most recent documents, please visit www.u-blox.com. Copyright © 2022, u-blox AG Further information For contact information, see www.u-blox.com/contact-u-blox. For more product details and ordering information, see the product data sheet. Product description The EVK-M101 evaluation kit is perfect for evaluating the performance of u-blox M10 positioning technology in an easy way. It comes in a rugged metal housing with a compact size of 105 x 64 x 26 mm. The 14-pin front connector gives access to all chip interface pins and allows current measurements as well. Your application board can connect to the embedded u-blox M10 chip through the SPI or I2C bus. EVK-M101 comes with u-center PC software for configuration, evaulation and debugging of u-blox GNSS products and services. u-center provides useful assistance during all phases of a system integration project. The EVK-M101 is powered through the USB interface. A PC running u-center can be connected via the USB or RS232 interface. On-board power consumption sensors allow measurements over time by means of the included u-center GNSS evaluation software. 105 × 64 × 26 mm