EVA9224RS28

AWL9224 ANADIGICS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

2.4 GHz 802.11b/g WLAN Power Amplifier PRELIMINARY DATA SHEET - Rev 1.3 16 Pin 3 mm x 3 mm x 0.9 mm LPCC

FEATURES

• 3% EVM @ P OUT = +20 dBm with IEEE 802.11g

64 QAM Modulation at 54 Mbps

• -38 dBc ACPR 1st Sidelobe at +23 dBm with IEEE 802.11b at 1, 2, 5.5, 11 Mbps
• -54 dBc ACPR 2nd Sidelobe at +23 dBm with IEEE 802.11b at 1, 2, 5.5, 11 Mbps
• Single +3.3 V Supply
• 32 dB of Linear Power Gain
• Temperature-Compensated Linear Power Detector
• 3 mm x 3 mm x 0.9 mm LPCC
• RoHS Compliant
• 5 0 Ω - Matched RF Ports

APPLICATIONS

• 802.11b/g WLAN
• 2.4 GHz ISM Equipment PRODUCT DESCRIPTION The ANADIGICS AWL9224 power amplifier is a high performance InGaP HBT IC designed for transmit applications in the 2.4-2.5 GHz band. Matched to 50/g86 at the input and output, the part requires no additional RF matching components off-chip. The PA exhibits unparalleled linearity for both IEEE 802.11g and 802.11b WLAN systems under the toughest signal configurations within these standards. The power detector is temperature compensated on the chip, enabling a single-ended output voltage with excellent accuracy over a wide range of operating temperatures. The PA is biased by a single +3.3 V supply and consumes ultra-low current in the OFF mode. The AWL9224 is manufactured using advanced InGaP HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. The AWL9224 is RoHS (Restrictions on Hazardous Substances) compliant. It is provided in a 3 x 3 x 0.9 mm LPCC package optimized for a 50 /g86 system. Figure 1: Block Diagram and Pinout AWL9224 13141516 8765 VCC2 VCC3 GND RF OUT GND DETOUT GND RF IN GND Output Matc h Input Matc h VCC1 VPC DETDC VBC Bias Netw ork Bias Netw ork Pow er DetectorGND GND GND

2 PRELIMINARY DATA SHEET - Rev 1.3 AWL9224 Table 1: Pin Description NIP EMAN NOITPIRCSED 1D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 2F R NI ranalpocsaetuoR.smhO05otdehctamyllanretniegatstupnidelpuocCA.tupnIFR .snipdnuorgtnecajdagnisuediugevaw 3D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 4D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 5V CB otrewopylppaotnipsihtotdeilppasitnerrucdnaegatlovylppuS.egatloVtiucriCsaiB .APehtedisnistiucricsaibeht 6V CP ehtfolortnocffo/norofsiesudednemmocerehT.niplortnocrewopreifilpmarewoP otdesuebdluohsV3.3+;ffoyletelpmocreifilpmanrutlliwdeilppaV0,yllanimoN.AP tnerrucehttesotdesusirotsiserseiresA.ytilibapactuptuomumixamotreifilpmates .APehtfolevelsaibllarevoehtgnillortnocybereht,nipehtotniwolf 7T ED CD ehtotrewopylppaotnipsihtotdeilppasitnerrucdnaegatlovylppuS.saiBrotceteD .APehtedisnistiucricrotceted 8T ED TUO roftuptuoehtseilppusTJBrewollofrettimenA.delpuocCD.tuptuOrotceteDrewoP .nipsiht 9D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 01D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 11F R TUO ranalpocsaetuoR.smhO05otdehctamyllanretniegatstuptuodelpuocCA.tuptuOFR dedulcnitnemelegnihctamevitcudnitnuhsA.snipdnuorgtnecajdagnisuediugevaw .nipsihttadnuorgothtapCDasedivorproticapacgnilpuocCAehtretfaAPehtedisni 21D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 31V 3CC .3egatsforotsisnartrewoprofsaiB.egatloVylppuS 41V 2CC .2egatsforotsisnartrewoprofsaiB.egatloVylppuS 51D NG .ecarttrohsgnisu52niPrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG 61V 1CC .1egatsforotsisnartrewoprofsaiB.egatloVylppuS 52D NG. egakcapCCPLehtfoedisrednuehtnogulsdnuorG

PRELIMINARY DATA SHEET - Rev 1.3 AWL9224

ELECTRICAL CHARACTERISTICS

Table 2: Absolute Minimum and Maximum Ratings Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. RETEMARAP NIM XAM TINU STNEMMOC V(ylppuSrewoPCD 1CC ,V 2CC ,V 3CC )- 5 .4+V V(leveLlortnoCrewoP CP )- 5 .4+V srotsiserseiresotdeilppA Votlanretxe CP FRoN.nip .deilppalangis V(lortnoCsaiB CB )- 5 .4+V d eilppalangisFRoN noitpmusnoCtnerruCCD- 0 07A m FR(leveLtupnIFR NI )- 5 -m Bd erutarepmeTtneibmAgnitarepO0 4-5 8+C ° erutarepmeTegarotS5 5-0 51+C ° Note: (1) Applied to series resistors external to V PC pin. RETEMARAP NIM PYT XAM TINU STNEMMOC )f(ycneuqerFgnitarepO0 042-0 052 zHM V(egatloVylppuS 1CC ,V 2CC ,V 3CC )0 .3+3 .3+6 .3+V V(egatloVsaiB BC)0 .3+3 .3+6 .3+V V(egatloVlortnoCrewoP CP ) 8.2+ 3.3+ 6.3+ 5.0+ V "NO"AP )1( "NWODTUHS"AP )1( T(erutarepmeTesaC C)0 4--5 8+C °

4 PRELIMINARY DATA SHEET - Rev 1.3 AWL9224 Table 4: Electrical Specifications - Continuous Wave (TC = +25 °C, VCC = +3.3 V, VPC = +3.3 V) RETEMARAP NIM PYT XAM TINU STNEMMOC Bd1P0 .620 .720 .82m Bd tnerruCnwodtuhS --1 /g109A V CP V0= tnerruCtnecseiuQ7 65 73 8A m V CP V,V3.3+= CC V3.3+= ffo=FR ssoLnruteRtupnI- 0 1-8 -B d ssoLnruteRtuptuO- 2 1-0 1-B d noitalosIesreveR0 4- - B d )suoirupS(ytilibatS- 0 7-5 6-c BdP taRWSV1:5 NI mBd01-= T NO emiTgnitteS --1 /g109S nihtiwseltteS /g54Bd5.0 T FFO emiTgnitteS --1 /g109S

PRELIMINARY DATA SHEET - Rev 1.3 AWL9224 Table 5: Electrical Specifications - IEEE 802.11g (TC = +25 °C, VCC = +3.3 V, VPC = +3.3 V, 64 QAM OFDM 54Mbps) Note: (1) EVM includes system noise floor of 1% (-40 dB). RETEMARAP NIM PYT XAM TINU STNEMMOC ycneuqerFgnitarepO0 042-0 052z HM niaGrewoP9 .920 .235 .33B d elppiRniaG- /g545.0 -B dd nabzHM001ssorcA )MVE(edutingaMrotceVrorrE )1( - 0.3 5.03- 2.4 5.72- Bd etaratadspbM45g11.208 P TUO mBd02+= noitpmusnoCtnerruC5 810 025 12A mP TUO mBd02+= scinomraH of2 of3 04- 04- 53- 53- cBdP TUO mBd02+= egatloVrotceteDrewoP0 8.05 8.00 9.0V P TUO mBd02+= ytivitisneSrotceteDrewoP5 55 65 7B d/VmP <mBd01 TUO mBd32< daoLtuptuOrotceteDrewoP ecnadepmI 1- -k /g86

6 PRELIMINARY DATA SHEET - Rev 1.3 AWL9224 Table 6: Electrical Specifications - IEEE 802.11b (TC = +25 °C, VCC = +3.3 V, VPC = +3.3 V, 1 Mbps, Gaussian Baseband Filtering, BT = 0.45) RETEMARAP NIM PYT XAM TINU STNEMMOC ycneuqerFgnitarepO0 042-0 052z HM niaGrewoP0 .130 .335 .43B d elppiRniaG- /g545.0 -B dd nabzHM001ssorcA )RPCA(rewoPlennahCtnecajdA (ebolediSts1 /g54 )tesffozHM11 -0 4-5 3-c Bd dnabesaBnaissuaG,spbM1 P;gniretliF TUO mBd32+= )RPCA(rewoPlennahCtnecajdA (ebolediSdn2 /g54 )tesffozHM22 -5 5-3 5-c Bd dnabesaBnaissuaG,spbM1 P;gniretliF TUO mBd32+= noitpmusnoCtnerruC 091 522 572 002 042 592 Am P TUO mBd91+= P TUO mBd12+= P TUO mBd32+= scinomraH of2 of3 33- 04- 03- 53- cBdP TUO mBd32+= egatloVrotceteDrewoP0 0.15 0.10 1.1V P TUO mBd32+= ytivitisneSrotceteDrewoP0 55 60 8B d/VmP <mBd01 TUO mBd32< daoLtuptuOrotceteDrewoP ecnadepmI 1- -k /g86

10 PRELIMINARY DATA SHEET - Rev 1.3 AWL9224

APPLICATION INFORMATION

Figure 19: Application Circuit 910 +/-5 % 0.1uF +/-1 0 % AWL 9224 GND RF IN GND GND4 VBC VPC6 DETOUT DETDC GND GND RF OUT VCC3 VCC2 VCC1 16 GND 5.6nH 5.6nH 0.47uF + /-10% +/-5 % 174 +/-1 % 10pF + /-0.5pF 0.1uF +/-1 0 % +/-5 % VCC VCC VDET VPC NOTES 4. DNP = Do Not Place 2. DC traces should be 8 mils wide with 8 mils of clearance 1. RF traces should be 18 mils wide with 20 mils of clearance GND GND 5. Pin 25 is the metallized Ground slug on the LPCC package. 3. Trace widths and clearances apply to application circuit on 10 mil FR4 6. Pins 1, 3, 10, and 12 should be tied directly to PCB ground pattern under Pin 25, and should form a coplanar waveguide for the RF In and RF Out.

ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. IMPORTANT NOTICE ANADIGICS, Inc.

141 Mount Bethel Road

Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. PRELIMINARY DATA SHEET - Rev 1.3 AWL9224

ORDERING INFORMATION

NOITPIRCSED GNIGAKCAPTNENOPMOC 1Q82SR4229LWAC °58+otC°04- niP61 mm9.0xmm3xmm3 CCPL leeRdnaepaTeceip000,1 0P82SR4229LWAC °58+otC°04- niP61 mm9.0xmm3xmm3 CCPL sebuTeceip999-1 6P82SR4229LWAC °58+otC°04- niP61 mm9.0xmm3xmm3 CCPL yarTeceip999-1 82SR4229AVEC °58+otC°04- niP61 mm9.0xmm3xmm3 CCPL draoBnoitaulavEeceip1