RFS1003 ANADIGICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
5.1-5.9 GHz U-NII Power Amplifier
Applications
- U-NII fixed-wireless CPE
- 5 GHz ISM band wireless equipment
- WLAN/802.11a/HIPERLAN/2 192021222324
121110987 N/C
The RFS1003 power amplifier is a high-power, high- performance GaAs MESFET IC designed for use in transmit applications in the 5.1-5.9 GHz frequency band. With a P1dB of 29 dBm, the device is ideal as a final stage for wireless applications requiring high transmit linearity. The input of the PA is matched to 50 ohms and the output can be easily matched for optimum linearity and power performance at the desired frequency of operation between 5.1 and 5.9 GHz. Product Features
- 29 dBm P1dB@7V
- 2 4 d B m P 1 d B @ 3 V
- 20 dB gain
- Input matched to 50 ohms
- Simple output matching 0.05 2.80 SQ 1.00 0.275 0.2250.45 0.35
0.50 TYP
1 ALL DIMENSIONS ARE IN
MILLIMETERS, ANGLES IN DEGREES.
2 THE TERMINAL #1 IDENTIFIER AND
PAD NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012 3 LEAD COPLANARITY: 0.05 MAX.
4 DIMENSION APPLIES TO METALLIZED
PAD AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM PAD TIP. 24 Pin 14.00 4.00 INDEX AREA 1.00 0.80 4x4 mm Package Outline
5.1-5.9 GHz U-NII Power Amplifier Specification Parameter 1 Min. Typ. Max. Unit Condition Overall Frequency Range 5150 5850 MHz Output P1dB 29 dBm V DD = 7V 24 dBm V DD = 3V Efficiency at P1dB 28 % Small Signal Gain 20 dB P IN = -20 dBm; VDD = 7V 21 dB P IN = -20 dBm; VDD = 3V Gain Flatness ±0.5 dB Across 100 MHz Band Harmonics 2nd Harmonic -35 dBc 3rd Harmonic -35 dBc Spurious (Stability)2 -60 dBc/30 kHz P IN = -30 to +10 dBm Reverse Isolation 50 dB Noise Figure 8.7 dB Input Return Loss 10 15 dB Output Return Loss 11 dB Power Supply Drain Operating Voltage 3 7 V Gate Operating Voltage -1.1 V Current Consumption 400 mA V DD = 7V 350 mA V DD = 3V Gate Leakage Current 25 µA Note 1: Test Conditions: VDD = 7.0V, PIN = +10dBm, Freq. = 5850MHz, VGG = -1.1 V, T =25C. Note 2: Load VSWR is set to 7:1 and the angle is varied 360 degrees. Absolute Maximum Ratings Parameter Rating Unit DC Power Supply 8.0 V DC Gate Voltage -5.0 min, -0.5 max V DC Supply Current 1000 mA Maximum RF input level +13 dBm Operating Ambient Temperature -40 to +85 °C Storage Temperature -55 to +150 °C
Ordering Information
PRFS-1003-0EVL -40 to +85 Evaluation Board 1 PRFS-1003-0005 -40 to +85 13" Reverse Tape/Reel 2500 pcs. PRFS-1003-0006 -40 to +85 13" Tape/Reel 2500 pcs. PRFS-1003-0007 -40 to +85 7" Reverse Tape/Reel 1000 pcs. PRFS-1003-0008 -40 to +85 7" Tape/Reel 1000 pcs. PRFS-1003-0009 -40 to +85 Bulk – 4x4 mm 24-pin LPCC 1-999 pcs. Quantity Package Description Temp. Range (°C)
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specificationscontainedinAdvancedProductInformationsheetsandPreliminaryDataSheetsaresubjecttochangepriortoaproduct’sformal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilitiesforinaccuracies. ANADIGICSstronglyurgescustomerstoverifythattheinformationtheyareusingiscurrentbeforeplacingorde rs. WARNING ANADIGICSproductsarenotintendedforuseinlifesupportappliances,devicesorsystems. UseofanANADIGICSproductinanysuchapplication withoutwrittenconsentisprohibited. ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059,U.S.A. Tel: +1(908)668-5000 Fax: +1(908)668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com