RFSP5032 ANADIGICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

5 GHz 802.11a WLAN Power Amplifier PRELIMINARY DATA SHEET - Rev 1.4 12 Pin 3 mm x 3 mm x 0.9 mm LPCC

FEATURES

  • 3.5% EVM @ P OUT = +19 dBm with IEEE 802.11a 64 QAM OFDM at 54 Mbps
  • 24.5 dB of Linear Power Gain at 5 GHz
  • Single +3.3 V Supply
  • 3 mm x 3 mm x 0.9 mm LPCC
  • < 1 dB Gain Variation From 4.9 - 5.9 GHz
  • 25 dBm P1dB
  • 170 mA @ P OUT = +19 dBm
  • RoHS Compliant
  • MSL 1 Rating

APPLICATIONS

  • 802.11a WLAN
  • 5 GHz Wireless Video Distribution PRODUCT DESCRIPTION The ANADIGICS RFS P5032 power amplifier is a high performance InGaP HBT power amplifier IC designed for transmit applications in the 4.9-5.9 GHz bands. The PA exhibits unparalleled linearity and efficiency for IEEE 802.11a WLAN systems under the toughest signal configurations within these standards. The PA is biased by a single +3.3 V supply and consumes ultra-low current in the OFF mode. Figure 1: Block Diagram and Pinout The RFS P5032 is manufactured using advanced InGaP HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. The IC is RoHS (Restrictions on Hazardous Substances) compliant, and is provided in a 3 mm x 3 mm x 0.9 mm LPCC package optimized for a 50 Ω system. 101112 654 VCC2 VCC RF OUT GND RF IN GND Matc hing Netw ork VCC1 VPC 2 VPC 1 Bias Control GND Matching Netw ork RF OUT RF OUTBias Control

2 PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032 Table 1: Pin Description NIP EMAN NOITPIRCSED 1D NG elbissoptsetrohsehtgnisuCIrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG .htap 2F R NI 05otdehctamreifilpmarewopottupniFR.tupnIFR /g86 ediugevawranalpocsaetuoR. tnuhshtiwdehctamecnadepmiyllamitpoebnactupniFR.snipdnuorgtnecajdagnisu .roticapacbutsswohstiucricnoitacilppA.roticapac 3D NG elbissoptsetrohsehtgnisuCIrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG .htap 4V 1CP rofsiesudednemmocerehT.1egatsrofniplortnocsaibreifilpmarewoP.lortnoCrewoP V3.3+;ffoyletelpmocreifilpmanrutlliwdeilppaV0,yllanimoN.APehtfolortnocffo/no rewoptuptuomumixamtA.ytilibapactuptuomumixamotreifilpmatesotdesuebdluohs desusirotsiserseiresA.tnerrucfoAm2ot1yletamixorppawardlliwnipsiht,ytilibapac .APehtfolevelsaibllarevoehtgnillortnocybereht,nipehtotniwolftnerrucehttesot 5D NG elbissoptsetrohsehtgnisuCIrednunrettapdnuorgBCPotyltceridtcennoC.dnuorG .htap 6V 2CP rofsiesudednemmocerehT.2egatsrofniplortnocsaibreifilpmarewoP.lortnoCrewoP V3.3+;ffoyletelpmocreifilpmanrutlliwdeilppaV0,yllanimoN.APehtfolortnocffo/no rewoptuptuomumixamtA.ytilibapactuptuomumixamotreifilpmatesotdesuebdluohs otdesusirotsiserseiresA.tnerrucfoAm2ot1sahcumsawardlliwnipsiht,ytilibapac .APehtfolevelsaibllarevognitteserofereht,nipehtotniwolftnerrucehttes 9,8,7F R TUO htiwdehctamecnadepmiyllamitpoebnacreifilpmarewopfotuptuoFR.tuptuOFR butsswohstiucricnoitacilppA.ytiraenilmumixamgnilbaneroticapactnuhslanoitidda FRnahguorhtrotsisnartrewopegatsdr3ehtsaibotdesuoslasinipsihT.roticapac .rotcudniekohc 01V CC .segatsllanoyrtiucriclortnocsaibrofdeefsaiBniaM.egatloVylppuS 11V 2CC .V3.3+ottesyllacipyT.2egatsforotsisnartrewoprofsaiB.egatloVylppuS 21V 3CC .V3.3+ottesyllacipyT.1egatsforotsisnartrewoprofsaiB.egatloVylppuS

PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032

ELECTRICAL CHARACTERISTICS

Table 2: Absolute Minimum and Maximum Ratings Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Note: (1) Applied to series resistors external to V PC pins. RETEMARAP NIM XAM TINU STNEMMOC V(ylppuSrewoPCD CC ,V 1CC ,V 2CC )- 0 .4+V V(leveLlortnoCrewoP 1CP ,V 2CP )- 0 .4+V srotsiserseiresotdeilppA Votlanretxe CP FRoN.snip .deilppalangis noitpmusnoCtnerruCCD- 0 07A m FR(leveLtupnIFR NI )- 0 m Bd erutarepmeTtneibmAgnitarepO0 4-5 8+C ° erutarepmeTegarotS5 5-0 51+C ° RETEMARAP NIM PYT XAM TINU STNEMMOC )f(ycneuqerFgnitarepO0 094-0 095 zHM a11.208 V(egatloVylppuS CC ,V 1CC ,V 2CC )0 .3+3 .3+6 .3+V V(egatloVlortnoCrewoP CP ) 8.2+ 3.3+ 6.3+ 5.0+ V "NO"AP )1( "NWODTUHS"AP )1( T(erutarepmeTesaC C)0 4--5 8+C °

4 PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032 Table 4: Electrical Specifications - Continuous Wave (TC = +25 °C, VCC = +3.3 V, VPC = +3.3 V) RETEMARAP NIM PYT XAM TINU STNEMMOC Bd1P4 25 2- m Bd tnerruCnwodtuhS- - 5 /g109A V0=saiBzHG5 tnerruCtnecseiuQ7 75 83 9A mV CP V,V3.3+= CC ffO=FR,V3.3+= ssoLnruteRtupnI- 5 1-0 1-B dt iucricnoitacilppahtiw ssoLnruteRtuptuO- 5 1-0 1-B dt iucricnoitacilppahtiw noitalosIesreveR0 30 4- B d )suoirupS(ytilibatS- 5 6-0 6-c BdP ,RWSV1:6 TUO 04-;mBd22+= OC

PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032 Table 5: Electrical Specifications - IEEE 802.11a (TC = +25 °C, VCC = +3.3 V, VPC = +3.3 V, 64 QAM OFDM 54 Mbps) Note: (1) EVM includes system noise floor of 1% (-40 dB). RETEMARAP NIM PYT XAM TINU STNEMMOC ycneuqerFgnitarepO0 094-0 095z HM niaGrewoP5 .325 .425 .52B dP TUO mBd91+= elppiRniaG- /g545.0 -B dd nabzHM001ynassorcA )MVE(edutingaMrotceVrorrE )1( 5.3 92- 5.4 72- Bd P TUO zHG53.5-09.4,mBd91+= etaratadspbM45a11.208 5.4 72- 5.5 52- Bd P TUO zHG58.5-53.5,mBd91+= etaratadspbM45a11.208 noitpmusnoCtnerruC0 610 710 81A mP TUO mBd91+= scinomraH of2 of3 04- 04- 53- 53- cBdP TUO mBd02+=

8 PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032 Figure 6: Output Return Loss vs. Frequency Across Temperature (VCC = +3.3 V) -20 -18 -16 -14 -12 -10 Frequency (GHz) Output Return Loss (dB) S22 +85C S22 +25C S22 -40C

PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032

APPLICATION INFORMATION

Figure 7: Application Circuit RFOUTRFIN GND GND GND VPC1 VPC2 RFS P5032 VCC1 VCC2 VCC NOTES 2. DC traces should be 8 mils wide with 10 mils of clearance. 1. RF traces should be 18 mils wide with 20 mils of clearance. 3. Trace widths and clearances apply to application circuit on 10 mil FR4. 4. Pins 1 and 3 should be tied directly to PCB ground pattern under the power amplifier, and should form a coplanar waveguide for the RF In. Ground should also provide a coplanar waveguide for the RF Out. C10 16 V 10 µF ±20 % C13 0.1 µF ±10 % 30.1 ±1 % 4.7 pF ±0.25 pF C11 10 pF ±0.5 pF C14 0.1 µF ±10 % 1.5 pF ±0.25 pF Stub 30 mils x 115 mils 0.1 µF ±10 % 0.1 µF ±10 % Stub 30 mils x 90 mils45 mils 1.5 pF ±0.25 pF 255 ±1 % 750 ±1 % 1000 pF ±10 % 170 mils 2.7 nH ±0.3 nH 2.74 K ±1 % C1E1 C2E2 INOUT GND VCC Philips BCV62 or Equivalent Rohm DTC143EE or Equivalent On/Off Current-Fixing Circuit RF IN RF OUT RF OUT RF OUT VCC

PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032 NOTES

ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. IMPORTANT NOTICE ANADIGICS, Inc.

141 Mount Bethel Road

Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. PRELIMINARY DATA SHEET - Rev 1.4 RFS P5032

ORDERING INFORMATION

NOITPIRCSED GNIGAKCAPTNENOPMOC 1Q23SR2305SFRC °58+otC°04- niP21 mm9.0xmm3xmm3 CCPL leeRdnaepaTeceip000,1 0P23SR2305SFRC °58+otC°04- niP21 mm9.0xmm3xmm3 CCPL sebuTeceip999-1 6P23SR2305SFRC °58+otC°04- niP21 mm9.0xmm3xmm3 CCPL yarTeceip999-1 23SR2305AVEC °58+otC°04- niP21 mm9.0xmm3xmm3 CCPL draoBnoitaulavEeceip1