ETR011 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
N L N L N L L N L N L N N L N L N L L N L N L N N L N L N L L N L N L N PRODUCT CATALOGUE - STEGO REGULATING TECHNICAL DATA Switch temperature difference 4 K (± 1K tolerance) at +20 °C (+68 °F) Sensor element NTC Reaction time approx. 5 sec. Contact type change-over contact (relay) Service life > 50,000 cycles Max. switching capacity (relay output) AC 240 V / AC 120 V, 8 (1.6) A DC 100 W at DC 24 V Max. inrush current AC 16 A for 10 sec. Optical indicator LED Connection 5-pole terminal, clamping torque 0.5 Nm max.: rigid/stranded1 wire 2.5 mm² (AWG 14) Mounting clip for 35 mm DIN rail, EN 60715 Casing plastic according to UL 94V-0, light grey Dimensions 64.5 x 42 x 38 mm Weight approx. 70 g Fitting position vertical Operating/Storage temperature -40 to +85 °C (-40 to +185 °F) Operating/Storage humidity max. 90 % RH (non-condensing) Protection type IP20 ¹ When connecting with stranded wires, wire end ferrules must be used. The electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both and inductive and resistive loads via relay with change-over contact. The LED integrated in the adjustment knob is lit when the NC is closed. (e.g. when a connected heater is operating). > Large setting range > Small hysteresis > Status indicator (LED) > Change-over contact > Clip fixing Heater Examples of connection Thermostat ETR 011 Thermostat ETR 011 e.g. Filter fan for cooling Thermostat ETR 011 e.g. Signal device Connection diagram Heater Filter fan, Cooling equipment, Signal device ELECTRONIC THERMOSTAT ETR 011 Art. No. Operating voltage Setting range Approvals 01131.0-00 AC 230 V, 50/60 Hz -20 to +60 °C VDE UL File No. E164102 EAC 01131.9-00 AC 120 V, 50/60 Hz -4 to +140 °F – UL File No. E164102 EAC TECHNICAL DATASHEET