CR030 STEGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
COMPACT HIGH-PERFORMANCE FAN HEATER CR 030 | 950 W The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provi des double insulation and acts as protection against contact. The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control. The CR 030 was designed as a stationary unit for the bottom of the enclosure. For wall fixing the fan heater CR 130 is recommended. > Compact design > Double insulated > Integrated thermostat or hygrostat Connection diagram TECHNICAL DATA Heating element high performance cartridge Temperature safety cut-out with automatic reset and second-tier one shot fuse to protect against overheating in case of fan failure Heater body extruded aluminium profile Axial fan, ball bearing airflow 160 m³/h, free flow service life 50,000 h at +25 °C (+77 °F) Connection 2-pole max. 2.5 mm², clamping screw with strain relief, torque 0.8 Nm max. Casing plastic according to UL94 V-0, black Mounting screw fixing (M5) Fitting position vertical airflow (air outlet up) Dimensions 168 x 145 x 100 mm Weight approx. 1.4 kg Operating¹/Storage temperature -45 to +70 °C (-49 to +158 °F) Operating/Storage humidity max. 90 % RH (non-condensing) Protection type/Protection class IP20 / II (double insulated) Note other heating capacities from 200 W up available on request ¹ Operating temperature of heater with integrated hygrostat: 0 to +60 °C (+32 to +140 °F). Art. No. Model Operating voltage Heating capacity Recommended pre-fuse T (time-delay) Setting range² Approvals 03051.0-00 Fan Heater with thermostat AC 230 V, 50/60 Hz 950 W 6.3 A 0 to +60 °C VDE UL File No. E234324 EAC 03059.9-00 Fan Heater with thermostat AC 120 V, 50/60 Hz 950 W 10.0 A +32 to +140 °F - UL File No. E234324 EAC ² Switch temperature difference 7 K (±4 K tolerance) HEATING TECHNICAL DATASHEET