PCC-M0530M-LP_V02 PANASONIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 15

Technical content

Features

Explanation of part numbers Standard packing quantity (Minimum quantity/Packing unit) PCC-M0530M-LP, PCC-M0630M-LP series PCC-M0840M-LP, PCC-M1040M-LP series 30-Jun-22Should a safety concern arise regarding this product, please be sure to contact us immediately. K Size □ 5 mm □ 6 mm □ 8 mm Code P N C 0.68 μHR68 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. □ 10 mm After PWB mounting Storage condition Operating temperature range Before PWB mounting Ta : -5 ℃ to +35 ℃ 85%RH max. Tc : -55 ℃ to +155 ℃ (Including self-temperature rise) Temperature rating InductanceCode 22 μH 4.7 μH 220 4R7 1 2 3 4 5 6 7 8 9 10 11 12 E T Q P M K V Product code Height Winding Inductance Suffix SizeCoreClassification UPDATE

Power Choke Coil (Automotive Grade) 1. PCC-M0530M-LP series (ETQP3M□□□KVP) *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

  • Inductance vs DC Current Standard parts Performance characteristics (Reference①-１) 0.33 4.85 (5.34) Rated current (A) Typ. △T= 40 K*2 ( )*3 △L= –30 %*4 2.9 (2.4) 4.2 3.5 (2.9) 6.1 4.1(3.4) 6.7 5.4 (4.4) 8.0 6.3 (5.2) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 0.68 7.6 (8.36) PCC-M0530M-LP [5.5×5.0×3.0] 27.3 (30.03) 2.2 20.0 (22.00) 1.5 10.2 (8.4) 15.9 12.7 (10.6) Part No. Inductance*1 DCR (at 20 ℃) (ｍΩ) 65.7 (72.27) 10.0 ±20 96.0 (105.60) 12.0 (13.20) ETQP3MR68KVP ETQP3MR33KVP ±10 4.7 45.6 (50.16) 3.3 MSL level Series [Size (mm)]L0 (μH) Tolerance (%) Typ. (max.) Tolerance (%) *5 6.8 12.0 9.0 (7.5) 14.1 10.1 8.1 (6.7) 21.8 ETQP3M100KVP 1 ETQP3M6R8KVP 1 ETQP3M4R7KVP 1 ETQP3M3R3KVP 1 ETQP3M2R2KVP 1 ETQP3M1R5KVP 1 ETQP3M1R0KVP 1.0 9.6 (10.56) Inductors (μH) ［ETQP3M100KVP ］ DC Bias (A) 0 2 64 8 ［ETQP3M3R3KVP ］ ［ETQP3M1R0KVP ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) 1.0 3.0 0 4 128 16 0 10 20 0.4 0.8 1.2 2.0 Inductors (μH) ［ETQP3M6R8KVP ］ DC Bias (A) ［ETQP3M2R2KVP ］ ［ETQP3MR68KVP ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) ［ETQP3M4R7KVP ］ DC Bias (A) ［ETQP3M1R5KVP ］ ［ETQP3MR47KVP ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) 0 2 64 80 0 2 64 120 8 10 1.0 2.5 0 4 128 16 2.0 1.0 1.5 0 4 128 16 2.0 1.5 0.5 0.5 0 10 20 0.4 0.8 0.6 0.2 0.2 0.3 0.4 0 10 3020 40 0.1 0.5 NEW

Power Choke Coil (Automotive Grade)

  • Inductance vs DC Current
  • Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4). *3 PWB condition B : Multilayer PWB with high heat dissipation performance. *2 Performance characteristics (Reference①-2) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 Performance characteristics (Reference②) Temperature rise ΔT(K) ［ETQP3M100KVP ］ 0 1 32 4 ［ETQP3M3R3KVP ］ ［ETQP3M1R0KVP ］ 0 2 64 8 0 124 8 Temperature rise ΔT(K)Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K)Temperature rise ΔT(K) Temperature rise ΔT(K) Temperature rise ΔT(K)Temperature rise ΔT(K) 0 1 32 4 5 0 1 32 4 5 6 0 2 64 8 0 2 64 8 10 12 0 124 8 16 0 124 8 16 ［ETQP3M6R8KVP ］ ［ETQP3M2R2KVP ］ ［ETQP3MR68KVP ］ ［ETQP3M4R7KVP ］ ［ETQP3M1R5KVP ］ ［ETQP3MR47KVP ］ DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) Temperature rise ΔT(K) 0 124 8 16 ［ETQP3MR33KVP ］ DC Bias (A) ［ETQP3MR33KVP ］ Inductors (μH) DC Bias (A) 0.2 0.3 0.4 0 4 128 16 20 0.1

Power Choke Coil (Automotive Grade) 2. PCC-M0630M-LP series (ETQP3M□□□KVN) *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

  • Inductance vs DC Current Standard parts Performance characteristics (Reference①) 3.6 (2.9) 5.8 4.5 (3.6) 2.1 (1.7) 3.0 2.7 (2.2) 4.3 3.0 (2.5) 5.1 12.1 (9.9) 9.8 11.5 7.9 (6.5) 12.8 Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 ±10 33.0 15.0 99.2 (109.12) 10.0 71.0 (78.10)

6.8 PCC-M0630M-LP

[6.4×6.0×3.0] 2.2 8.1 14.2 6.1 (5.0) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. 3.3 24.1 (26.51) ±20 206.0 (226.60) 16.0 13.2 (10.8) 20.2 1.5 11.0 (12.10) 0.68 5.2 (5.72) MSL level Series [Size (mm)]L0 (μH) Tolerance (%) Typ. (max.) Tolerance (%) *5 Rated current (A) Typ. △T= 40 K*2 ( )*3 △L= –30 %*4 ETQP3M220KVN ETQP3M150KVN 14.5 (15.95) ETQP3M100KVN Part No. Inductance*1 DCR (at 20 ℃) (ｍΩ) 45.6 (50.16) ETQP3M330KVN 4.7 29.0 (31.90) ETQP3MR68KVN 1 ETQP3M3R3KVN 1 ETQP3M2R2KVN 1 ETQP3M1R5KVN 19.1 (7.4) ETQP3M1R0KVN 1.0 6.2 (6.82) ETQP3M6R8KVN 1 ETQP3M4R7KVN 15.6 (4.6) Inductors (μH) ［ETQP3M330KVN ］ DC Bias (A) 0 2 543 ［ETQP3M6R8KVN ］ ［ETQP3M1R5KVN ］ 0 4 128 16 0 124 8 0.5 1.0 1.5 16 20 24 2.0 Inductors (μH) ［ETQP3M220KVN ］ DC Bias (A) 0 2 64 Inductors (μH) ［ETQP3M150KVN ］ DC Bias (A) 0 642 Inductors (μH) ［ETQP3M100KVN ］ DC Bias (A) 0 6 12108 8 2 ［ETQP3M4R7KVN ］ 0 4 128 16 ［ETQP3M3R3KVN ］ 2.0 0 4 128 20 1.0 3.0 ［ETQP3M2R2KVN ］ 1.0 2.0 0 4 128 16 1.5 2.5 1 0.5 16 20 24 ［ETQP3M1R0KVN ］ 0 10 20 0.4 0.8 1.2 ［ETQP3MR68KVN ］ 0 10 0.2 0.4 0.6 20 30 40 0.8 Inductors (μH) Inductors (μH) Inductors (μH) Inductors (μH) Inductors (μH) Inductors (μH) Inductors (μH) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)

Power Choke Coil (Automotive Grade)

  • Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4). *3 PWB condition B : Multilayer PWB with high heat dissipation performance. *2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 Performance characteristics (Reference②) Temperature rise ΔT(K) ［ETQP3M330KVN ］ DC Bias (A) 0 1 32 ［ETQP3M6R8KVN ］ ［ETQP3M1R5KVN ］ 0 2 64 0 124 8 Temperature rise ΔT(K)Temperature rise ΔT(K) Temperature rise ΔT(K) ［ETQP3M220KVN ］ DC Bias (A) 0 1 32 ［ETQP3M4R7KVN ］ ［ETQP3M1R0KVN ］ 0 2 64 0 2010 15 Temperature rise ΔT(K)Temperature rise ΔT(K) Temperature rise ΔT(K) ［ETQP3M150KVN ］ DC Bias (A) 0 1 52 ［ETQP3M3R3KVN ］ ［ETQP3MR68KVN ］ 0 2 64 Temperature rise ΔT(K)Temperature rise ΔT(K) Temperature rise ΔT(K) ［ETQP3M100KVN ］ DC Bias (A) 0 2 64 ［ETQP3M2R2KVN ］ 0 4 128 Temperature rise ΔT(K) 4 3 4 8 8 5 0 2010 155 DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)

Power Choke Coil (Automotive Grade) 3. PCC-M0840M-LP series (ETQP4M□□□KVK) *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

  • Inductance vs DC Current Standard parts Performance characteristics (Reference①) PCC-M0840M-LP [8.5×8.0×4.0] Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 2.2 8.5 (9.35) 4.7 10.0 1ETQP4M330KVK ETQP4M220KVK ETQP4M3R3KVK ETQP4MR68KVK ETQP4M4R7KVK 1 16.1 (17.71) ETQP4M6R8KVK Series [Size (mm)]L0 (μH) Tolerance (%) Typ. (max.) Tolerance (%) *5 Rated current (A) Typ. △T= 40 K*2 ( )*3 △L= –30 %*4 MSL level 3.1 (2.6) 4.7 3.8 (3.2) 6.0 17.4 8.3 (7.1) 15.1 4.5 (3.8) 7.6 5.2 (4.4) 9.1 6.9 (5.9) 11.0 22.5 14.1 (15.51) 1.5 4.9 (5.39)ETQP4M1R5KVK 8.9 (7.6) ETQP4M2R2KVK 17.3 (14.8) 24.4 19.5 (16.6) 29.0 1 11.0 3.7 (4.07) ±20 118.0 (129.80) 0.68 2.92 (3.21) 11.4 (9.8) 20.4 15.1 (12.8) 3.3 ETQP4M150KVK ETQP4M100KVK Part No. ±10 22.0 78.4 (86.24) 15.0 55.0 (60.50) Inductance*1 DCR (at 20 ℃) (ｍΩ) 33.0 6.8 23.5 (25.85) ETQP4M1R0KVK 41.6 (45.76) Inductors (μH) ［ETQP4M330KVK ］ DC Bias (A) 0 4 62 ［ETQP4M6R8KV ］ ［ETQP4M1R5KVK ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) 0 5 1510 20 0 3010 20 0.5 1.0 1.5 2.0 Inductors (μH) ［ETQP4M220KVK ］ DC Bias (A) 0 8 1240 ［ETQP4M4R7KVK ］ ［ETQP4M1R0KVK ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) 0 2010 30 0 3010 20 0.4 0.8 1.2 Inductors (μH) ［ETQP4M150KVK ］ DC Bias (A) 0 8 124 ［ETQP4M3R3KVK ］ ［ETQP4MR68KVK ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) 1.0 3.0 0 2010 30 0 3010 20 0.2 0.4 0.6 2.0 0.8 Inductors (μH) ［ETQP4M100KVK ］ DC Bias (A) 0 8 124 ［ETQP4M2R2KVK ］ Inductors (μH) DC Bias (A) 0.5 1.5 0 10 3020 40 1.0 2.0 2.5

Power Choke Coil (Automotive Grade)

  • Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4). *3 PWB condition B : Multilayer PWB with high heat dissipation performance. *2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 Performance characteristics (Reference②) Temperature rise ΔT(K) ［ETQP4M330KVK ］ DC Bias (A) 0 1 32 ［ETQP4M6R8KVK ］ ［ETQP4M1R5KVK ］ DC Bias (A) DC Bias (A) 0 2 64 Temperature rise ΔT(K)Temperature rise ΔT(K) 4 5 8 10 ［ETQP4M220KVK ］ ［ETQP4M4R7KVK ］ ［ETQP4M1R0KVK ］ ［ETQP4M150KVK ］ ［ETQP4M3R3KVK ］ ［ETQP4MR68KVK ］ ［ETQP4M100KVK ］ ［ETQP4M2R2KVK ］ Temperature rise ΔT(K) 0 1 32 0 84 0 5 15 Temperature rise ΔT(K)Temperature rise ΔT(K) 4 5 Temperature rise ΔT(K) 0 2 0 4 0 10 20 Temperature rise ΔT(K)Temperature rise ΔT(K) 4 6 8 12 Temperature rise (ΔTK) 0 42 0 84 60Temperature rise ΔT(K) 6 8 12 16 302520100 5 15 252010 DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A) DC Bias (A)

Power Choke Coil (Automotive Grade) 4. PCC-M1040M-LP series (ETQP4M□□□KVC) *1: Measured at 100 kHz *2: The proved current value for making the overall temperature rise of 40K, when mounted on a multi-layer board with *3: The proved current value for making the overall temperature rise of 40K, when mounted on a 4-layer circuit board of FR4 t=1.6 mm and DC current is applied. *4: Saturation rated current : DC current which causes L(0) drop –30 %. *5: The solderability is guaranteed for 1 year only. The product out of expiration date shall not be used． ◆ Within a suitable application, the part’s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +155°C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area.

  • Inductance vs DC Current Standard parts Performance characteristics (Reference①) 5.6 5.0 (4.1) 7.4 12.1 11.2 (9.2) 13.9 6.3 (5.2) 9.2 7.6 (6.3) 10.8 8.9 (7.4) 23.9 (19.6) 14.8 (12.1) 21.0 17.4 (14.3) 25.0 34.6 22.0 60.0 (66.00) 1.5 6.8 18.5 (20.35) 15.0 37.0 (40.70) 3.3 9.4 (10.34) 4.7 ETQP4M2R2KVC 1 ETQP4M4R7KVC 2.2 6.8 (7.48) 4.9 (5.39) 1.0 2.6 (2.86) PCC-M1040M-LP 33.0 84.6 (93.06) Series [Size (mm)]L0 (μH) Tolerance (%) Typ. (max.) Tolerance (%) *5 ETQP4M680KVC ETQP4M3R3KVC 1 ETQP4M150KVC 1 ETQP4M100KVC 1 ETQP4M6R8KVC 1 12.3 (13.53) 12.6 (10.3) 17.1 ±20 242.0 (266.20) ±10 Part No. Inductance*1 DCR (at 20 ℃) (ｍΩ) ETQP4M101KVC 1 Rated current (A) Typ. △T= 40 K*2 ( )*3 △L= –30 %*4 2.5 (2.0) 3.5 MSL level 100.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 ETQP4M330KVC 1 ETQP4M220KVC 4.2 (3.4) ETQP4M1R5KVC ETQP4M1R0KVC DC Bias (A) NEW NEW ［ETQP4M100KVC ］ 0 4 128 20 ［ETQP4M2R2KVC ］ 0 3010 20 0.5 1.0 1.5 2.5 2.0 ［ETQP4M220KVC ］ 0 8 1240 ［ETQP4M3R3KVC ］ 3.0 0 10 30 2.0 1.0 ［ETQP4M470KVC ］ 0 4 620 ［ETQP4M330KVC ］ 0 6 1020 4 8 ［ETQP4M150KVC ］ 0 12 1680 ［ETQP4M6R8KVC ］ 0 5 1510 25 ［ETQP4M4R7KVC ］ 0 10 30 ［ETQP4M1R5KVC ］ 0 3010 20 0.5 1.0 1.5 2.0 120 100 0 2 31 4 75 6 0 2 31 4 75 6 8 ［ETQP4M101KVC ］ ［ETQP4M680KVC ］ Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH) DC Bias (A) Inductors (μH)

Power Choke Coil (Automotive Grade)

  • Inductance vs DC Current
  • Case Temperature vs DC Current PWB condition A : Four-layer PWB (1.6 mm FR4). *3 PWB condition B : Multilayer PWB with high heat dissipation performance. *2 Performance characteristics (Reference①) Performance characteristics (Reference②) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 ［ETQP4M2R2KVC ］ 0 10 20 ［ETQP4M1R5KVC ］ 0 10 20 ［ETQP4M100KVC ］ 0 2 64 8 10 12 ［ETQP4M6R8KVC ］ 0 4 8 12 ［ETQP4M220KVC ］ ［ETQP4M150KVC ］ 0 42 6 8 0 420 6 8 ［ETQP4M4R7KVC ］ ［ETQP4M3R3KVC ］ 0 4 8 12 16 0 4 8 12 16 ［ETQP4M470KVC ］ 0 1 32 4 5 ［ETQP4M330KVC ］ 0 1 320 4 5 6 ［ETQP4M1R0KVC ］ 0 10 20 ［ETQP4M1R0KVC ］ 0 3010 20 0.4 0.8 1.2 40 50 60 0 1 32 40 1 32 ［ETQP4M101KVC ］ ［ETQP4M680KVC ］ DC Bias (A) Inductors (μH) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A) Temperature rise ΔT(K) DC Bias (A)

Power Choke Coil (Automotive Grade) Dimensional tolerance unless noted : ±0.5 Unit : mm Dimensions in mm (not to scale) Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 Series PCC-M0530M-LP Series PCC-M0630M-LP (ETQP4M1R0KVC) Series PCC-M0840M-LP Series PCC-M1040M-LP (ETQP4M□□□KVK) (ETQP4M□□□✽KVC) ✽Exemption 1R0 Series PCC-M1040M-LP Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Suffix Inductance PolarityDate Code 5.5±0.4 1.0±0.4 1.0±0.4 2.54±0.3 5.0±0.4 3.0 max. 0.05 min. Suffix Inductance PolarityDate Code 6.4±0.4 1.04±0.4 1.04±0.4 3.18±0.3 6.0±0.4 3.0 max. 0.05 min. Suffix Inductance PolarityDate Code 8.5±0.4 1.3±0.4 1.3±0.4 5.08±0.3 8.0±0.4 4.0 max. 0.05 min. Suffix Inductance PolarityDate Code 10.7±0.4 2.08±0.4 2.08±0.4 3.0±0.3 10.0±0.4 4.0 max. 0.05 min. Suffix Inductance PolarityDate Code 10.7±0.4 2.15±0.5 2.15±0.5 4.7±0.3 10.0±0.4 4.0 max. 0.05 min.

Power Choke Coil (Automotive Grade) Dimensional tolerance unless noted : ±0.5 ※Don't wire on the pattern on shaded portion the PWB. Unit : mm ■ As for soldering conditions and safety precautions (Power choke coils (Automotive grade)), please see data files Recommended land pattern in mm (not to scale) Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 Series PCC-M0530M-LP Series PCC-M0630M-LP Series PCC-M0840M-LP Series PCC-M1040M-LP Series PCC-M1040M-LP (ETQP4M□□□✽KVC)✽Exemption 1R0 (ETQP4M1R0KVC) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. 7.0 6.0 9.0 11.0 5.334 3.251 4.953 11.0 2.79 6.5 2.946 6.756 7.4 3.429 8.255 9.5 4.826 9.652 11.711.7 5.842 12.192 5.187 12.065 3.429

Power Choke Coil (Automotive Grade)

  • Embossed carrier tape dimensions in mm (not to scale) Unit : mm
  • Taping reel dimensions in mm (not to scale) Unit : mm Packaging methods (Taping) Parts mounting (Taping) Standard packing quantity / Reel Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. B C øD E A 8.63 9.1 16 0.4 1.75 2 1.75 7.5 12 Series 4 1.5 1.5 Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Jun-22 330 (100) 13 Series W PCC-M0530M-LP 13.5 PCC-M0630M-LP 17.5PCC-M0840M-LP PCC-M1040M-LP 25.5 PCC-M0530M-LP 2,000 pcsPCC-M0630M-LP PCC-M0840M-LP 500 pcsPCC-M1040M-LP Quantity per reelSerise ETQP4M□□□KVC P０ øD0 4 1.5 0.5 0.3 11.5 16 PCC-M0530M-LP 3.3 PCC-M0630M-LP 3.3 PCC-M0840M-LP 6.0 PCC-M1040M-LP 6.35 A B W t1 5.6 6.1 12 1.75 5.5 8 2 E F P1 P２ 1,000 pcs / box (2 reel) 4,000 pcs / box (2 reel) Part No. Minimum quantity / Packing unit ETQP3M□□□KVP ETQP3M□□□KVN ETQP4M□□□KVK 10.65 11.75 Terminal F E W t2P2 P0 A B Tape running direction øD0 A E W B C øD

■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21 Guidelines and precautions regarding the technical information and use of our products described in this online catalog. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations>

Power Choke Coil (Automotive Grade) ・ When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. ・ Do not use the products beyond the specifications described in this catalog. ・ This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. ・ Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device. ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. 1. Provision to abnormal condition This power choke coil itself does not have any protective function in abnormal condition such as overload, short-circuit and open-circuit conditions, etc. Therefore, it shall be confirmed as the end product that there is no risk of smoking, fire, dielectric withstand voltage, insulation resistance, etc. in abnormal conditions to provide protective devices and/or protection circuit in the end product. 2. Temperature rise Temperature rise of power choke coil depends on the installation condition in end products. It shall be confirmed in the actual end product that temperature rise of power choke coil is in the limit of specified temperature class. 3. Dielectric strength Dielectric withstanding test with higher voltage than specific value will damage Insulating material and shorten its life. 4. Water This Power choke coil must not be used in wet condition by water, coffee or any liquid because insulation strength becomes very low in such condition. 5. Potting If this power choke coil is potted in some compound, coating material of magnet wire might be occasionally damaged. Please ask us if you intend to pot this power choke coil. 6. Model When this power choke coil is used in a similar or new product to the original one, it might be unable to satisfy he specifications due to difference of condition of usage. Please ask us if you use this power choke coil in the manner such as above. 7. Drop If the power choke coil receives mechanical stress such as drop, characteristics may become poor (due to damage on coil bobbin, etc.). Never use such stressed power choke coil. 8. Buzz Noise When this coil is used in the frequency band of the audible range ( ≒ 20 Hz to 20 kHz), or, when using in burst mode, depending on the operating conditions (conditions of the energized waveform) sounds (buzz noise) may occur. Depending on the circuit / board installation environment it may be heard as abnormal sounds, so please check in advance. 9. Solvent (Series MC) If this power choke coil is dipped in the cleaning agent, and the coating agent of the toluene and the xylene system, there is a possibility that the performance decreases greatly. Please ask us if you intend to pot this power choke coil. 10. Static electricity measures (Series MC) ①Circuit design Please set up the ESD measures parts such as capacitors in the former steps of this power choke coil for static electricity when there is a possibility that static electricity is impressed to the choke coil on the circuit. Moreover, please consult our company about such a case once. Application Guidelines (Automotive grade) Precautions for use 1-Oct-19 Safety precautions

Power Choke Coil (Automotive Grade) ②Treatment with single Take countermeasures against static electricity when using single power choke coil. (process and equipment) There is a possibility that the characteristic changes when the voltage of 200 V or more is impressed to this power choke coil. Please handle 200 V or less. 11. Printed circuit board design ①Land pattern and Via which exceed Operating Voltage, should not be placed top layer PWB under the products for keeping isolation between inside coil and surface of PWB. (Series DUST) ②To the opposing part in this power choke coil bottom please install neither pattern nor the beer, etc. (Series MC) ③Parts arranged around this power choke coil do not touch the surface of this power choke coil (Top side and side). (Series MC) ④This power choke coil is different from the ferrite core-type that installs general concentration GAP. It has the leakage magnetic bunch distribution of the choke coil to the vertical direction. Please be cautious when using parts and circuit compositions which are easily affected by the leakage flux. 12. Other using emviroment This power choke coil is not designed for the use in the following, special environment. Therefore, please do not use it in the following special environment. ・Use in place where a lot of causticity gases such as sea breeze, Cl 2, H2S, NH3, SO2, and NOx exist. ・Use in place where out-of-door exposure and direct sunshine strike. 13. Core Chipping and Core Crack This choke coil has a possibility to make partial chipping or crack in the core due to excessive mechanical stress from outside, and might have initially a partial chipping and/or cracks that do not affect the quality. 14. Keeping environment If this power choke coil is kept under following environment and condition, there is a possibility that the performance and soldering decreases greatly. ・Keep in place where a lot of causticity gases such as sea breeze, Cl 2, H2S, NH3, SO2, and NOx exist. ・Keep in place where out-of-door exposure and direct sunshine strike. ＜Package markings＞ Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. The products are tested based on all or part of the test conditions and methods defined in AEC-Q200. Please consult with Panasonic for the details of the product specification and specific evaluation test results, etc., and please review and approve Panasonic's product specification before ordering. 1-Oct-19 AEC-Q200 Compliant The opposing part in the choke coil bottom 8.4 2.8 3.8 The opposing part in the choke coil bottom Side Top side Side(PWB)