ESPRIT RFSOLUTIONS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
RELAY 1 RELAY 2 RELAY 3 RELAY 4 FUSE POWER TIMER Timer Select Button – Used to select timer mode Erase Button – Press and hold to erase all pairings, see advanced operation for individual erase Signal Test mode – Press to enter signal test mode Sync/Pair Button – Press once to auto pair. See Advanced operation for other pairing options. Momentary/Latching selection – Make the link to select momentary operation break the link for latching operation. (Default is latching) 110Vac power input Power input fuse – must be 500mA (Fast blow fuse recommended) Relay switch terminals: Neutral Live Earth FUSE RELAY 1 RELAY 2 RELAY 3 RELAY 4 SYNC TEST ERASE FUSE FUSE FUSE Output Fuses must be 8A (Slow blow fuses recommended) Status LEDs– Flash when signals are sent/received L N E L N E L N E L N E L N E Mag sync – Touch a magnet to the plastic case in the cross hatched area to replicate the sync button on board without opening the case
Fig 1.1 RELAY 1 RELAY 2 RELAY 3 RELAY 4 FUSE POWER TIMER SELECT FUSE RELAY 1 RELAY 2 RELAY 3 RELAY 4 SYNC SIGNAL TEST ERASE FUSE FUSE FUSE 110V INPUT SUPPLY A B LOAD C ANT
RF Solutions Ltd. Recycling Notice Meets the following EC Directives: DO NOT Discard with normal waste, please recycle. ROHS Directive 2002/95/EC Specifies certain limits for hazardous substances. WEEE Directive 2002/96/EC Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfills its WEEE obligations by mem- bership of an approved compliance scheme. 251.00 All Dimensions in mm 106.00 53.00 125.50 Waste Batteries and Accumulators Directive 2006/66/EC Where batteries are fitted, before recycling the product, the batteries must be removed and disposed of at a licensed collection point. Environment Agency producer registration num- ber: WEE/JB0104WV.