ESE-11MV1

ESE-11MV1 PANASONIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES43 – E S E 567 8 9 5N Detector Switches Type:ESE11 ■ Explanation of Part Numbers ■ Features

• Wide range of customizable fea tures including operational directions
• Light operating force
• Wide available range for refl ow soldering ■ Recommended Ap pli ca tions
• Detection of media in portable electronic equipment ■ Specifi cations Rating 50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load) Contact Resi stance 500 m /L50529 max. (Initial) Insulation Resistance 100 M /L50529 m i n . ( 1 00 V d c ) Dielectric Withstanding Vo ltage 100 Vac for 1 minute Operating Force 350 mN max. (Full Travel) Mounting Height
• Type SV 4.9 mm
• Type MV 4.9 mm (MV2, 7 : 5.4 mm)
• Type SH 5.25 mm
• Type MH 4.25 mm
• Type HS, SF 3.6 mm Poles and Throws 1-pole 1-throw Full Travel (Pus hing distance)
• Type SV 6.1 mm (2.4 mm)
• Type MV 6.1 mm (2.4 mm)
• Type SH 3.0 mm (2.4 mm)
• Type MH 1.7 mm (2.4 mm)
• Type HS, SF 6.3 mm (2.4 mm) Operating Life 50000 cycles min. Temperature Range –10 °C to +70 °C Heat Resistance +80 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance +4 0 °C 90 % to 95 % RH for 96 hours Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES44 – 5.2 6.4 2.2 3.0 2.45 4.9 8.5(2.7) 1.0 (3.3) φ1.2–0.1 0.1 7.75 6.1 1.27 ON starting position Lever center φ1.25 +0.05 A Full travel1.0 0.8 1.0 1.0 0.952.3 PWB mounting hole for reference View from A 2.3 (2.45) 0.95 4–φ1.10 +0.05 3.3 5.2 6.4 2.2 3.0 1.65 1.0 4.9 1.0 –0.1 7.75 6.1 1.27 ON starting position 1.65±0.1 0.8 Full travel 1.51.75 1.0 1.41.85 1.41.4 2.02.0 1.4 3.35 3.25 2-φ1.3 Ho le A PWB mounting hole for reference View from A Minimum Quantity/Packing Unit ESE11SV/L52408 ESE11MV/L52408 ESE11SH/L52408 ESE11MH/L52408 ESE11HS/L52408 ESE11SF/L52408 200 pcs. Polyethylene Bag (Bulk) ESE11MV/L52408T (Excluding : ESE11MV2) 800 pcs. Embossed Taping (Reel Pack) ESE11MH/L52408T 1500 pcs. Embossed Taping (Reel Pack) Quantity/ Carton ESE11SV/L52408 ESE11MV/L52408 ESE11SH/L52408 ESE11MH/L52408 ESE11HS/L52408 ESE11SF/L52408 10000 pcs. Polyethylene Bag (Bulk) ESE11MV2 8000 pcs. Polyethylene Bag (Bulk) ESE11MV/L52408T (Excluding : ESE11MV2) 4800 pcs. Embossed Taping (Reel Pack) ESE11MH/L52408T 9000 pcs. Embossed Taping (Reel Pack) No. 1 ESE11SV1 No. 2 ESE11MV1 Vertical Type Gold plating ESE11MV5 ■ Dimensions in mm (not to scale) For refl ow soldering 1-pole 1-throw For wave soldering 1-pole 1-throw Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES45 – 6.4 2.35 0.1 3.15 ON starting position 2.35 Lever center Full travel 5.6 1.65 6.5 5.4 4.65 3.0 1.27 4.2 4.75 5.7 5.9 5.36 1.5 1.0 1.75 1.0 0.85.1 8.51.0 φ1.2 3.1 1.75 1.5 2-φ1.10 2-φ1.20(1.65) (5.4) 5.36 A 3.0 1.0 3.2 5.25 PWB mounting hole for reference View from A 5.2 6.4 2.2 3.0 1.65 1.0 5.4 7.5 11.01.01.75 φ1.2 –0.1 10.25 8.6 max. 1.27 ON starting position 1.65 0.8 Full travel 1.5 1.75 1.0 1.41.85 1.41.4 2.02.0 1.4 3.35 3.25 2-φ1.3 Hole A PWB mounting hole for reference View from A 5.2 6.4 1.5 1.75 1.0 2.2 3.0 1.65 1.0 1.0 1.04.9 8.5 1.751.65 φ1.2 1.27 0.8 6.1 7.75 0–0.1 4–1.41.85 3.25 3.35 +0.05 A ON starting position Full travel PWB mounting hole for reference View from A 6.4 2.35 0.1 3.15 ON starting position 2.35 Lever center Full travel 5.6 1.65 6.5 5.4 4.65 3.0 1.27 4.2 4.75 5.7 5.9 5.36 1.75 1.0 1.5 1.0 0.85.1 8.51.0φ1.2 3.1 1.5 1.75 2-φ1.10 2-φ1.20(1.65) (5.4) 5.36 A 3.0 1.0 3.2 5.25 PWB mounting hole for reference View from A For refl ow soldering 1-pole 1-throw For refl ow soldering 1-pole 1-throw No. 5 ESE11SH1C No. 6 ESE11SH2C Gold plating ESE11SH5 Vertical TypeHorizontal Type No. 3 ESE11MV9 No. 4 ESE11MV2 For refl ow soldering 1-pole 1-throw For wave soldering 1-pole 1-throw ■ Dimensions in mm (not to scale) Gold plating ESE11SH6 Gold plating ESE11MV13 Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES46 – 7.65 4.5 5.2 3.75 3.0 3.6 1.01.0 8.6 6.15 1.5 1.0 5.85 1.0 3.64.51.5 0.9 2.85 1.15 1.6 1.75 1.5 2.25 φ1.0 0.1 1.65 7.0 6.25 4.6 6.3 7.95 8.7 2.2 1.27 ON starting position Full travel A B ON starting position Full travel φ1.30 +0.05 hole0 φ1.30 +0.05 hole0 6.15 6.15 4.50±0.05 5.85 5.85 2.85±0.05 M2 screw hole M2 screw hole PWB mounting hole for reference AView from side BView from side φ1.2–0.1 φ1.2–0.1 φ2.0–0. 7.65 4.5 5.2 3.75 3.0 3.6 1.01.0 8.6 φ1.2–0.1 6.15 1.5 1.0 5.85 1.0 3.64.51.5 0.9 2.85 1.15 1.6 1.75 1.5 2.25 φ1.0 0.1 1.65 7.0 6.25 4.6 6.3 7.95 8.7 2.2 1.27 ON starting position Full travel A B ON starting position Full travel φ1.30 +0.05 hole0 φ1.30 +0.05 hole0M2 screw hole 6.15 6.15 4.50±0.05 5.85 5.85 2.85±0.05 M2 screw hole PWB mounting hole for reference AView from side BView from side φ1.2–0.1 φ2.0 –0.1 7.6 0.8 4.90.2 0.5 0.1 φ1.2 4.25 3.0 6.7 2.20.6 3.4 1.4 1.65 1.0 6.4 5.6 1.2 1.75 1.5 5.36 0.7 5.4 5.36 5.0 4.4 3.2 2.9 0.6–0.05 3.7–0.7 1.7 1.0 4.1 4.6 2.1 1.27 Full travel ON starting position C0.2 2-φ0.70 hol e 1.75 1.5 1.4 1.6 1.6 A PWB mounting hole for reference View from A 7.6 0.8 4.9 0.2 0.5 0.1 φ1.2 4.25 3.0 6.7 2.20.6 3.4 1.4 1.65 1.0 6.4 5.6 1.2 1.751.5 5.36 0.7 5.4 5.36 5.0 4.4 3.2 2.9 0.6–0.05 1.7 1.0 3.35 4.1 4.6 2.1 1.27 Full travel C0.2 2-φ0.70 1.5 1.75 1.4 1.6 1.6 ON starting position A PWB mounting hole for reference View from A ■ Dimensions in mm (not to scale) No. 7 ESE11MH1 No. 8 ESE11MH2 Gold plating ESE11MH3 No. 9 ESE11HS1 No. 10 ESE11HS2 Horizontal Type Gold plating ESE11MH4 For wave soldering 1-pole 1-throw For refl ow soldering 1-pole 1-throw For refl ow soldering 1-pole 1-throw For refl ow soldering 1-pole 1-throw Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES47 – 8.0 2.2 5.2 0.6 1.51.65 1.6 1.0 0.8 0.7 3.6 8.7±0.2 6.3 7.95 8.7 4.5 0.9 1.5 (2.6) 1.0 1.75 1.5 2.25 1.3+0.5 1.65 0.1 1.05.35 3.35±0.05 7.0 3.35 3.61.5 3.0 1.0 0.5 0.6 1.27 0.5 φ1.2–0.1 φ1.0 φ1.2 Full travel ON starting position 1.3+0.5 φ1.30 +0.05 8.00+0.05 1.8+0.5 A PWB mounting hole for reference (PWB thickness=0.80±0.05) View from A With mounting hole 1-pole 1-throw ■ Dimensions in mm (not to scale)Horizontal Type No. 11 ESE11SF1A Oct. 201200

Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES48 – Common terminal LeverFrameFrame Common terminal Common terminal Common terminal Common terminal MH, SH Type 1-pole 1-throw (N.O) 1-pole 1-throw (N.O) 1-pole 1-throw (N.O) C C C MV, SV Type SF, HS Type CC 16.4φ380±2.0 END TOP 16.0±0.3 1.75±0.1(7.5) P=12.0±0.1 4.0±0.1 2.0±0.1 φ1.5 +0.1 13.5 Carrier tape Cover tape Drawing direction Pilot holes Leading portion 400 mm min. Packed portion (100 mm min.)(160 mm min.) Non-packed portionNon-packed portion END TOP 16.0±0.3 1.75±0.1(7.5) P=12.0±0.1 4.0±0.1 2.0±0.1 φ1.5+0 .10 13.5 Carrier tape Cover tape Drawing direction Pilot holes Leading portion 400 mm min. Packed portion (100 mm min.)(160 mm min.) Non-packed portionNon-packed portion ■ Circuit Diagram ■ Packaging Specifi cations Standard Reel Dimensions in mm (not to scale) Taping Reel Embossed Carrier Taping ESE11MV1T, ESE11MV5T, ESE11MV9T ESE11MH1T, ESE11MH2T Oct. 201200